Version:  2.0.40 2.2.26 2.4.37 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10

Linux/sound/soc/samsung/Kconfig

  1 menuconfig SND_SOC_SAMSUNG
  2         tristate "ASoC support for Samsung"
  3         depends on PLAT_SAMSUNG || ARCH_EXYNOS || COMPILE_TEST
  4         depends on COMMON_CLK
  5         select SND_SOC_GENERIC_DMAENGINE_PCM
  6         ---help---
  7           Say Y or M if you want to add support for codecs attached to
  8           the Samsung SoCs' Audio interfaces. You will also need to
  9           select the audio interfaces to support below.
 10 
 11 if SND_SOC_SAMSUNG
 12 
 13 config SND_S3C24XX_I2S
 14         tristate
 15 
 16 config SND_S3C_I2SV2_SOC
 17         tristate
 18 
 19 config SND_S3C2412_SOC_I2S
 20         tristate
 21         select SND_S3C_I2SV2_SOC
 22 
 23 config SND_SAMSUNG_PCM
 24         tristate "Samsung PCM interface support"
 25 
 26 config SND_SAMSUNG_SPDIF
 27         tristate "Samsung SPDIF transmitter support"
 28         select SND_SOC_SPDIF
 29 
 30 config SND_SAMSUNG_I2S
 31         tristate "Samsung I2S interface support"
 32 
 33 config SND_SOC_SAMSUNG_NEO1973_WM8753
 34         tristate "Audio support for Openmoko Neo1973 Smartphones (GTA02)"
 35         depends on MACH_NEO1973_GTA02
 36         select SND_S3C24XX_I2S
 37         select SND_SOC_WM8753
 38         select SND_SOC_BT_SCO
 39         help
 40           Say Y here to enable audio support for the Openmoko Neo1973
 41           Smartphones.
 42 
 43 config SND_SOC_SAMSUNG_JIVE_WM8750
 44         tristate "SoC I2S Audio support for Jive"
 45         depends on MACH_JIVE && I2C
 46         select SND_SOC_WM8750
 47         select SND_S3C2412_SOC_I2S
 48         help
 49           Say Y if you want to add support for SoC audio on the Jive.
 50 
 51 config SND_SOC_SAMSUNG_SMDK_WM8580
 52         tristate "SoC I2S Audio support for WM8580 on SMDK"
 53         depends on MACH_SMDK6410 || COMPILE_TEST
 54         depends on I2C
 55         select SND_SOC_WM8580
 56         select SND_SAMSUNG_I2S
 57         help
 58           Say Y if you want to add support for SoC audio on the SMDKs.
 59 
 60 config SND_SOC_SAMSUNG_SMDK_WM8994
 61         tristate "SoC I2S Audio support for WM8994 on SMDK"
 62         depends on I2C=y
 63         select MFD_WM8994
 64         select SND_SOC_WM8994
 65         select SND_SAMSUNG_I2S
 66         help
 67                 Say Y if you want to add support for SoC audio on the SMDKs.
 68 
 69 config SND_SOC_SAMSUNG_S3C24XX_UDA134X
 70         tristate "SoC I2S Audio support UDA134X wired to a S3C24XX"
 71         depends on ARCH_S3C24XX
 72         select SND_S3C24XX_I2S
 73         select SND_SOC_L3
 74         select SND_SOC_UDA134X
 75 
 76 config SND_SOC_SAMSUNG_SIMTEC
 77         tristate
 78         help
 79           Internal node for common S3C24XX/Simtec suppor
 80 
 81 config SND_SOC_SAMSUNG_SIMTEC_TLV320AIC23
 82         tristate "SoC I2S Audio support for TLV320AIC23 on Simtec boards"
 83         depends on ARCH_S3C24XX && I2C
 84         select SND_S3C24XX_I2S
 85         select SND_SOC_TLV320AIC23_I2C
 86         select SND_SOC_SAMSUNG_SIMTEC
 87 
 88 config SND_SOC_SAMSUNG_SIMTEC_HERMES
 89         tristate "SoC I2S Audio support for Simtec Hermes board"
 90         depends on ARCH_S3C24XX && I2C
 91         select SND_S3C24XX_I2S
 92         select SND_SOC_TLV320AIC3X
 93         select SND_SOC_SAMSUNG_SIMTEC
 94 
 95 config SND_SOC_SAMSUNG_H1940_UDA1380
 96         tristate "Audio support for the HP iPAQ H1940"
 97         depends on ARCH_H1940 && I2C
 98         select SND_S3C24XX_I2S
 99         select SND_SOC_UDA1380
100         help
101           This driver provides audio support for HP iPAQ h1940 PDA.
102 
103 config SND_SOC_SAMSUNG_RX1950_UDA1380
104         tristate "Audio support for the HP iPAQ RX1950"
105         depends on MACH_RX1950 && I2C
106         select SND_S3C24XX_I2S
107         select SND_SOC_UDA1380
108         help
109           This driver provides audio support for HP iPAQ RX1950 PDA.
110 
111 config SND_SOC_SMARTQ
112         tristate "SoC I2S Audio support for SmartQ board"
113         depends on MACH_SMARTQ || COMPILE_TEST
114         depends on I2C
115         select SND_SAMSUNG_I2S
116         select SND_SOC_WM8750
117 
118 config SND_SOC_SAMSUNG_SMDK_SPDIF
119         tristate "SoC S/PDIF Audio support for SMDK"
120         select SND_SAMSUNG_SPDIF
121         help
122           Say Y if you want to add support for SoC S/PDIF audio on the SMDK.
123 
124 config SND_SOC_SMDK_WM8994_PCM
125         tristate "SoC PCM Audio support for WM8994 on SMDK"
126         depends on I2C=y
127         select MFD_WM8994
128         select SND_SOC_WM8994
129         select SND_SAMSUNG_PCM
130         help
131           Say Y if you want to add support for SoC audio on the SMDK
132 
133 config SND_SOC_SPEYSIDE
134         tristate "Audio support for Wolfson Speyside"
135         depends on I2C && SPI_MASTER
136         depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
137         select SND_SAMSUNG_I2S
138         select SND_SOC_WM8996
139         select SND_SOC_WM9081
140         select SND_SOC_WM0010
141         select SND_SOC_WM1250_EV1
142 
143 config SND_SOC_TOBERMORY
144         tristate "Audio support for Wolfson Tobermory"
145         depends on INPUT && I2C
146         depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
147         select SND_SAMSUNG_I2S
148         select SND_SOC_WM8962
149 
150 config SND_SOC_BELLS
151         tristate "Audio support for Wolfson Bells"
152         depends on MFD_ARIZONA && I2C && SPI_MASTER
153         depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
154         select SND_SAMSUNG_I2S
155         select SND_SOC_WM5102
156         select SND_SOC_WM5110
157         select SND_SOC_WM9081
158         select SND_SOC_WM0010
159         select SND_SOC_WM1250_EV1
160 
161 config SND_SOC_LOWLAND
162         tristate "Audio support for Wolfson Lowland"
163         depends on I2C
164         depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
165         select SND_SAMSUNG_I2S
166         select SND_SOC_WM5100
167         select SND_SOC_WM9081
168 
169 config SND_SOC_LITTLEMILL
170         tristate "Audio support for Wolfson Littlemill"
171         depends on I2C
172         depends on MACH_WLF_CRAGG_6410 || COMPILE_TEST
173         select SND_SAMSUNG_I2S
174         select MFD_WM8994
175         select SND_SOC_WM8994
176 
177 config SND_SOC_SNOW
178         tristate "Audio support for Google Snow boards"
179         depends on I2C
180         select SND_SOC_MAX98090
181         select SND_SOC_MAX98095
182         select SND_SAMSUNG_I2S
183         help
184           Say Y if you want to add audio support for various Snow
185           boards based on Exynos5 series of SoCs.
186 
187 config SND_SOC_ARNDALE_RT5631_ALC5631
188         tristate "Audio support for RT5631(ALC5631) on Arndale Board"
189         depends on I2C
190         select SND_SAMSUNG_I2S
191         select SND_SOC_RT5631
192 
193 config SND_SOC_SAMSUNG_TM2_WM5110
194         tristate "SoC I2S Audio support for WM5110 on TM2 board"
195         depends on SND_SOC_SAMSUNG && MFD_ARIZONA && I2C && SPI_MASTER
196         select SND_SOC_MAX98504
197         select SND_SOC_WM5110
198         select SND_SAMSUNG_I2S
199         help
200           Say Y if you want to add support for SoC audio on the TM2 board.
201 
202 endif #SND_SOC_SAMSUNG

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us