Version:  2.0.40 2.2.26 2.4.37 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18

Linux/drivers/usb/storage/Kconfig

  1 #
  2 # USB Storage driver configuration
  3 #
  4 
  5 comment "NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may"
  6 comment "also be needed; see USB_STORAGE Help for more info"
  7 
  8 config USB_STORAGE
  9         tristate "USB Mass Storage support"
 10         depends on SCSI
 11         ---help---
 12           Say Y here if you want to connect USB mass storage devices to your
 13           computer's USB port. This is the driver you need for USB
 14           floppy drives, USB hard disks, USB tape drives, USB CD-ROMs,
 15           USB flash devices, and memory sticks, along with
 16           similar devices. This driver may also be used for some cameras
 17           and card readers.
 18 
 19           This option depends on 'SCSI' support being enabled, but you
 20           probably also need 'SCSI device support: SCSI disk support'
 21           (BLK_DEV_SD) for most USB storage devices.
 22 
 23           To compile this driver as a module, choose M here: the
 24           module will be called usb-storage.
 25 
 26 config USB_STORAGE_DEBUG
 27         bool "USB Mass Storage verbose debug"
 28         depends on USB_STORAGE
 29         help
 30           Say Y here in order to have the USB Mass Storage code generate
 31           verbose debugging messages.
 32 
 33 config USB_STORAGE_REALTEK
 34         tristate "Realtek Card Reader support"
 35         depends on USB_STORAGE
 36         help
 37           Say Y here to include additional code to support the power-saving function
 38           for Realtek RTS51xx USB card readers.
 39 
 40           If this driver is compiled as a module, it will be named ums-realtek.
 41 
 42 config REALTEK_AUTOPM
 43         bool "Realtek Card Reader autosuspend support"
 44         depends on USB_STORAGE_REALTEK && PM_RUNTIME
 45         default y
 46 
 47 config USB_STORAGE_DATAFAB
 48         tristate "Datafab Compact Flash Reader support"
 49         depends on USB_STORAGE
 50         help
 51           Support for certain Datafab CompactFlash readers.
 52           Datafab has a web page at <http://www.datafab.com/>.
 53 
 54           If this driver is compiled as a module, it will be named ums-datafab.
 55 
 56 config USB_STORAGE_FREECOM
 57         tristate "Freecom USB/ATAPI Bridge support"
 58         depends on USB_STORAGE
 59         help
 60           Support for the Freecom USB to IDE/ATAPI adaptor.
 61           Freecom has a web page at <http://www.freecom.de/>.
 62 
 63           If this driver is compiled as a module, it will be named ums-freecom.
 64 
 65 config USB_STORAGE_ISD200
 66         tristate "ISD-200 USB/ATA Bridge support"
 67         depends on USB_STORAGE
 68         ---help---
 69           Say Y here if you want to use USB Mass Store devices based
 70           on the In-Systems Design ISD-200 USB/ATA bridge.
 71 
 72           Some of the products that use this chip are:
 73 
 74           - Archos Jukebox 6000
 75           - ISD SmartCable for Storage
 76           - Taiwan Skymaster CD530U/DEL-0241 IDE bridge
 77           - Sony CRX10U CD-R/RW drive
 78           - CyQ've CQ8060A CDRW drive
 79           - Planex eXtreme Drive RX-25HU USB-IDE cable (not model RX-25U)
 80 
 81           If this driver is compiled as a module, it will be named ums-isd200.
 82 
 83 config USB_STORAGE_USBAT
 84         tristate "USBAT/USBAT02-based storage support"
 85         depends on USB_STORAGE
 86         help
 87           Say Y here to include additional code to support storage devices
 88           based on the SCM/Shuttle USBAT/USBAT02 processors.
 89 
 90           Devices reported to work with this driver include:
 91           - CompactFlash reader included with Kodak DC3800 camera
 92           - Dane-Elec Zmate CompactFlash reader
 93           - Delkin Efilm reader2
 94           - HP 8200e/8210e/8230e CD-Writer Plus drives
 95           - I-JAM JS-50U
 96           - Jessops CompactFlash JESDCFRU BLACK
 97           - Kingston Technology PCREAD-USB/CF
 98           - Maxell UA4 CompactFlash reader
 99           - Memorex UCF-100
100           - Microtech ZiO! ICS-45 CF2
101           - RCA LYRA MP3 portable
102           - Sandisk ImageMate SDDR-05b
103 
104           If this driver is compiled as a module, it will be named ums-usbat.
105 
106 config USB_STORAGE_SDDR09
107         tristate "SanDisk SDDR-09 (and other SmartMedia, including DPCM) support"
108         depends on USB_STORAGE
109         help
110           Say Y here to include additional code to support the Sandisk SDDR-09
111           SmartMedia reader in the USB Mass Storage driver.
112           Also works for the Microtech Zio! CompactFlash/SmartMedia reader.
113 
114           If this driver is compiled as a module, it will be named ums-sddr09.
115 
116 config USB_STORAGE_SDDR55
117         tristate "SanDisk SDDR-55 SmartMedia support"
118         depends on USB_STORAGE
119         help
120           Say Y here to include additional code to support the Sandisk SDDR-55
121           SmartMedia reader in the USB Mass Storage driver.
122 
123           If this driver is compiled as a module, it will be named ums-sddr55.
124 
125 config USB_STORAGE_JUMPSHOT
126         tristate "Lexar Jumpshot Compact Flash Reader"
127         depends on USB_STORAGE
128         help
129           Say Y here to include additional code to support the Lexar Jumpshot
130           USB CompactFlash reader.
131 
132           If this driver is compiled as a module, it will be named ums-jumpshot.
133 
134 config USB_STORAGE_ALAUDA
135         tristate "Olympus MAUSB-10/Fuji DPC-R1 support"
136         depends on USB_STORAGE
137         help
138           Say Y here to include additional code to support the Olympus MAUSB-10
139           and Fujifilm DPC-R1 USB Card reader/writer devices.
140 
141           These devices are based on the Alauda chip and support both
142           XD and SmartMedia cards.
143 
144           If this driver is compiled as a module, it will be named ums-alauda.
145 
146 config USB_STORAGE_ONETOUCH
147         tristate "Support OneTouch Button on Maxtor Hard Drives"
148         depends on USB_STORAGE
149         depends on INPUT=y || INPUT=USB_STORAGE
150         help
151           Say Y here to include additional code to support the Maxtor OneTouch
152           USB hard drive's onetouch button.
153 
154           This code registers the button on the front of Maxtor OneTouch USB
155           hard drive's as an input device. An action can be associated with
156           this input in any keybinding software. (e.g. gnome's keyboard short-
157           cuts)
158 
159           If this driver is compiled as a module, it will be named ums-onetouch.
160 
161 config USB_STORAGE_KARMA
162         tristate "Support for Rio Karma music player"
163         depends on USB_STORAGE
164         help
165           Say Y here to include additional code to support the Rio Karma
166           USB interface.
167 
168           This code places the Rio Karma into mass storage mode, enabling
169           it to be mounted as an ordinary filesystem. Performing an eject
170           on the resulting scsi device node returns the Karma to normal
171           operation.
172 
173           If this driver is compiled as a module, it will be named ums-karma.
174 
175 config USB_STORAGE_CYPRESS_ATACB
176         tristate "SAT emulation on Cypress USB/ATA Bridge with ATACB"
177         depends on USB_STORAGE
178         ---help---
179           Say Y here if you want to use SAT (ata pass through) on devices based
180           on the Cypress USB/ATA bridge supporting ATACB. This will allow you
181           to use tools to tune and monitor your drive (like hdparm or smartctl).
182 
183           If you say no here your device will still work with the standard usb
184           mass storage class.
185 
186           If this driver is compiled as a module, it will be named ums-cypress.
187 
188 config USB_STORAGE_ENE_UB6250
189         tristate "USB ENE card reader support"
190         depends on SCSI
191         depends on USB_STORAGE
192         ---help---
193           Say Y here if you wish to control a ENE SD/MS Card reader.
194           Note that this driver does not support SM cards.
195 
196           This option depends on 'SCSI' support being enabled, but you
197           probably also need 'SCSI device support: SCSI disk support'
198           (BLK_DEV_SD) for most USB storage devices.
199 
200           To compile this driver as a module, choose M here: the
201           module will be called ums-eneub6250.
202 
203 config USB_UAS
204         tristate "USB Attached SCSI"
205         depends on SCSI && USB_STORAGE
206         help
207           The USB Attached SCSI protocol is supported by some USB
208           storage devices.  It permits higher performance by supporting
209           multiple outstanding commands.
210 
211           If you don't know whether you have a UAS device, it is safe to
212           say 'Y' or 'M' here and the kernel will use the right driver.
213 
214           If you compile this driver as a module, it will be named uas.

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us