Version:  2.0.40 2.2.26 2.4.37 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10

Linux/drivers/usb/serial/Kconfig

  1 #
  2 # USB Serial device configuration
  3 #
  4 
  5 menuconfig USB_SERIAL
  6         tristate "USB Serial Converter support"
  7         depends on TTY
  8         ---help---
  9           Say Y here if you have a USB device that provides normal serial
 10           ports, or acts like a serial device, and you want to connect it to
 11           your USB bus.
 12 
 13           Please read <file:Documentation/usb/usb-serial.txt> for more
 14           information on the specifics of the different devices that are
 15           supported, and on how to use them.
 16 
 17           To compile this driver as a module, choose M here: the
 18           module will be called usbserial.
 19 
 20 if USB_SERIAL
 21 
 22 config USB_SERIAL_CONSOLE
 23         bool "USB Serial Console device support"
 24         depends on USB_SERIAL=y
 25         ---help---
 26           If you say Y here, it will be possible to use a USB to serial
 27           converter port as the system console (the system console is the
 28           device which receives all kernel messages and warnings and which
 29           allows logins in single user mode). This could be useful if some
 30           terminal or printer is connected to that serial port.
 31 
 32           Even if you say Y here, the currently visible virtual console
 33           (/dev/tty0) will still be used as the system console by default, but
 34           you can alter that using a kernel command line option such as
 35           "console=ttyUSB0". (Try "man bootparam" or see the documentation of
 36           your boot loader (lilo or loadlin) about how to pass options to the
 37           kernel at boot time.)
 38 
 39           If you don't have a VGA card installed and you say Y here, the
 40           kernel will automatically use the first USB to serial converter
 41           port, /dev/ttyUSB0, as system console.
 42 
 43           If unsure, say N.
 44 
 45 config USB_SERIAL_GENERIC
 46         bool "USB Generic Serial Driver"
 47         help
 48           Say Y here if you want to use the generic USB serial driver.  Please
 49           read <file:Documentation/usb/usb-serial.txt> for more information on
 50           using this driver.  It is recommended that the "USB Serial converter
 51           support" be compiled as a module for this driver to be used
 52           properly.
 53 
 54 config USB_SERIAL_SIMPLE
 55         tristate "USB Serial Simple Driver"
 56         help
 57           Say Y here to use the USB serial "simple" driver.  This driver
 58           handles a wide range of very simple devices, all in one
 59           driver.  Specifically, it supports:
 60                 - Suunto ANT+ USB device.
 61                 - Medtronic CareLink USB device
 62                 - Fundamental Software dongle.
 63                 - Google USB serial devices
 64                 - HP4x calculators
 65                 - a number of Motorola phones
 66                 - Novatel Wireless GPS receivers
 67                 - Siemens USB/MPI adapter.
 68                 - ViVOtech ViVOpay USB device.
 69                 - Infineon Modem Flashloader USB interface
 70                 - ZIO Motherboard USB serial interface
 71 
 72           To compile this driver as a module, choose M here: the module
 73           will be called usb-serial-simple.
 74 
 75 config USB_SERIAL_AIRCABLE
 76         tristate "USB AIRcable Bluetooth Dongle Driver"
 77         help
 78             Say Y here if you want to use USB AIRcable Bluetooth Dongle.
 79 
 80             To compile this driver as a module, choose M here: the module
 81             will be called aircable.
 82 
 83 config USB_SERIAL_ARK3116
 84         tristate "USB ARK Micro 3116 USB Serial Driver"
 85         help
 86           Say Y here if you want to use a ARK Micro 3116 USB to Serial
 87           device.
 88 
 89           To compile this driver as a module, choose M here: the
 90           module will be called ark3116
 91 
 92 config USB_SERIAL_BELKIN
 93         tristate "USB Belkin and Peracom Single Port Serial Driver"
 94         help
 95           Say Y here if you want to use a Belkin USB Serial single port
 96           adaptor (F5U103 is one of the model numbers) or the Peracom single
 97           port USB to serial adapter.
 98 
 99           To compile this driver as a module, choose M here: the
100           module will be called belkin_sa.
101 
102 config USB_SERIAL_CH341
103         tristate "USB Winchiphead CH341 Single Port Serial Driver"
104         help
105           Say Y here if you want to use a Winchiphead CH341 single port
106           USB to serial adapter.
107 
108           To compile this driver as a module, choose M here: the
109           module will be called ch341.
110 
111 config USB_SERIAL_WHITEHEAT
112         tristate "USB ConnectTech WhiteHEAT Serial Driver"
113         select USB_EZUSB_FX2
114         help
115           Say Y here if you want to use a ConnectTech WhiteHEAT 4 port
116           USB to serial converter device.
117 
118           To compile this driver as a module, choose M here: the
119           module will be called whiteheat.
120 
121 config USB_SERIAL_DIGI_ACCELEPORT
122         tristate "USB Digi International AccelePort USB Serial Driver"
123         ---help---
124           Say Y here if you want to use Digi AccelePort USB 2 or 4 devices,
125           2 port (plus parallel port) and 4 port USB serial converters.  The
126           parallel port on the USB 2 appears as a third serial port on Linux.
127           The Digi Acceleport USB 8 is not yet supported by this driver.
128 
129           This driver works under SMP with the usb-uhci driver.  It does not
130           work under SMP with the uhci driver.
131 
132           To compile this driver as a module, choose M here: the
133           module will be called digi_acceleport.
134 
135 config USB_SERIAL_CP210X
136         tristate "USB CP210x family of UART Bridge Controllers"
137         help
138           Say Y here if you want to use a CP2101/CP2102/CP2103 based USB
139           to RS232 converters.
140 
141           To compile this driver as a module, choose M here: the
142           module will be called cp210x.
143 
144 config USB_SERIAL_CYPRESS_M8
145         tristate "USB Cypress M8 USB Serial Driver"
146         help
147           Say Y here if you want to use a device that contains the Cypress
148           USB to Serial microcontroller, such as the DeLorme Earthmate GPS.
149 
150                 Attempted SMP support... send bug reports!
151 
152           Supported microcontrollers in the CY4601 family are:
153                 CY7C63741 CY7C63742 CY7C63743 CY7C64013
154         
155           To compile this driver as a module, choose M here: the
156           module will be called cypress_m8.
157 
158 config USB_SERIAL_EMPEG
159         tristate "USB Empeg empeg-car Mark I/II Driver"
160         help
161           Say Y here if you want to connect to your Empeg empeg-car Mark I/II
162           mp3 player via USB.  The driver uses a single ttyUSB{0,1,2,...}
163           device node.  See <file:Documentation/usb/usb-serial.txt> for more
164           tidbits of information.
165 
166           To compile this driver as a module, choose M here: the
167           module will be called empeg.
168 
169 config USB_SERIAL_FTDI_SIO
170         tristate "USB FTDI Single Port Serial Driver"
171         ---help---
172           Say Y here if you want to use a FTDI SIO single port USB to serial
173           converter device. The implementation I have is called the USC-1000.
174           This driver has also been tested with the 245 and 232 devices.
175 
176           See <http://ftdi-usb-sio.sourceforge.net/> for more
177           information on this driver and the device.
178 
179           To compile this driver as a module, choose M here: the
180           module will be called ftdi_sio.
181 
182 config USB_SERIAL_VISOR
183         tristate "USB Handspring Visor / Palm m50x / Sony Clie Driver"
184         help
185           Say Y here if you want to connect to your HandSpring Visor, Palm
186           m500 or m505 through its USB docking station. See
187           <http://usbvisor.sourceforge.net/index.php3> for more information on using this
188           driver.
189 
190           To compile this driver as a module, choose M here: the
191           module will be called visor.
192 
193 config USB_SERIAL_IPAQ
194         tristate "USB PocketPC PDA Driver"
195         help
196           Say Y here if you want to connect to your Compaq iPAQ, HP Jornada
197           or any other PDA running Windows CE 3.0 or PocketPC 2002
198           using a USB cradle/cable. For information on using the driver,
199           read <file:Documentation/usb/usb-serial.txt>.
200 
201           To compile this driver as a module, choose M here: the
202           module will be called ipaq.
203 
204 config USB_SERIAL_IR
205         tristate "USB IR Dongle Serial Driver"
206         help
207           Say Y here if you want to enable simple serial support for USB IrDA
208           devices.  This is useful if you do not want to use the full IrDA
209           stack.
210 
211           To compile this driver as a module, choose M here: the
212           module will be called ir-usb.
213 
214 config USB_SERIAL_EDGEPORT
215         tristate "USB Inside Out Edgeport Serial Driver"
216         ---help---
217           Say Y here if you want to use any of the following devices from
218           Inside Out Networks (Digi):
219           Edgeport/4
220           Rapidport/4
221           Edgeport/4t
222           Edgeport/2
223           Edgeport/4i
224           Edgeport/2i
225           Edgeport/421
226           Edgeport/21
227           Edgeport/8
228           Edgeport/8 Dual
229           Edgeport/2D8
230           Edgeport/4D8
231           Edgeport/8i
232           Edgeport/2 DIN
233           Edgeport/4 DIN
234           Edgeport/16 Dual
235 
236           To compile this driver as a module, choose M here: the
237           module will be called io_edgeport.
238 
239 config USB_SERIAL_EDGEPORT_TI
240         tristate "USB Inside Out Edgeport Serial Driver (TI devices)"
241         help
242           Say Y here if you want to use any of the devices from Inside Out
243           Networks (Digi) that are not supported by the io_edgeport driver.
244           This includes the Edgeport/1 device.
245 
246           To compile this driver as a module, choose M here: the
247           module will be called io_ti.
248 
249 config USB_SERIAL_F81232
250         tristate "USB Fintek F81232 Single Port Serial Driver"
251         help
252           Say Y here if you want to use the Fintek F81232 single
253           port usb to serial adapter.
254 
255           To compile this driver as a module, choose M here: the
256           module will be called f81232.
257 
258 config USB_SERIAL_F8153X
259         tristate "USB Fintek F81532/534 Multi-Ports Serial Driver"
260         help
261           Say Y here if you want to use the Fintek F81532/534 Multi-Ports
262           USB to serial adapter.
263 
264           To compile this driver as a module, choose M here: the
265           module will be called f81534.
266 
267 
268 config USB_SERIAL_GARMIN
269        tristate "USB Garmin GPS driver"
270        help
271          Say Y here if you want to connect to your Garmin GPS.
272          Should work with most Garmin GPS devices which have a native USB port.
273 
274          See <http://sourceforge.net/projects/garmin-gps> for the latest
275          version of the driver.
276 
277          To compile this driver as a module, choose M here: the
278          module will be called garmin_gps.
279 
280 config USB_SERIAL_IPW
281         tristate "USB IPWireless (3G UMTS TDD) Driver"
282         select USB_SERIAL_WWAN
283         help
284           Say Y here if you want to use a IPWireless USB modem such as
285           the ones supplied by Axity3G/Sentech South Africa.
286 
287           To compile this driver as a module, choose M here: the
288           module will be called ipw.
289 
290 config USB_SERIAL_IUU
291         tristate "USB Infinity USB Unlimited Phoenix Driver"
292         help
293           Say Y here if you want to use a IUU in phoenix mode and get
294           an extra ttyUSBx device. More information available on
295           http://eczema.ecze.com/iuu_phoenix.html
296 
297           To compile this driver as a module, choose M here: the
298           module will be called iuu_phoenix.o
299 
300 config USB_SERIAL_KEYSPAN_PDA
301         tristate "USB Keyspan PDA Single Port Serial Driver"
302         select USB_EZUSB_FX2
303         help
304           Say Y here if you want to use a Keyspan PDA single port USB to
305           serial converter device.  This driver makes use of firmware
306           developed from scratch by Brian Warner.
307 
308           To compile this driver as a module, choose M here: the
309           module will be called keyspan_pda.
310 
311 config USB_SERIAL_KEYSPAN
312         tristate "USB Keyspan USA-xxx Serial Driver"
313         select USB_EZUSB_FX2
314         ---help---
315           Say Y here if you want to use Keyspan USB to serial converter
316           devices.  This driver makes use of Keyspan's official firmware
317           and was developed with their support.  You must also include
318           firmware to support your particular device(s).
319 
320           See <http://blemings.org/hugh/keyspan.html> for more information.
321 
322           To compile this driver as a module, choose M here: the
323           module will be called keyspan.
324 
325 config USB_SERIAL_KEYSPAN_MPR
326         bool "USB Keyspan MPR Firmware"
327         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
328         help
329           Say Y here to include firmware for the Keyspan MPR converter.
330 
331 config USB_SERIAL_KEYSPAN_USA28
332         bool "USB Keyspan USA-28 Firmware"
333         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
334         help
335           Say Y here to include firmware for the USA-28 converter.
336 
337 config USB_SERIAL_KEYSPAN_USA28X
338         bool "USB Keyspan USA-28X Firmware"
339         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
340         help
341           Say Y here to include firmware for the USA-28X converter.
342           Be sure you have a USA-28X, there are also 28XA and 28XB
343           models, the label underneath has the actual part number.
344 
345 config USB_SERIAL_KEYSPAN_USA28XA
346         bool "USB Keyspan USA-28XA Firmware"
347         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
348         help
349           Say Y here to include firmware for the USA-28XA converter.
350           Be sure you have a USA-28XA, there are also 28X and 28XB
351           models, the label underneath has the actual part number.
352 
353 config USB_SERIAL_KEYSPAN_USA28XB
354         bool "USB Keyspan USA-28XB Firmware"
355         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
356         help
357           Say Y here to include firmware for the USA-28XB converter.
358           Be sure you have a USA-28XB, there are also 28X and 28XA
359           models, the label underneath has the actual part number.
360 
361 config USB_SERIAL_KEYSPAN_USA19
362         bool "USB Keyspan USA-19 Firmware"
363         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
364         help
365           Say Y here to include firmware for the USA-19 converter.
366 
367 config USB_SERIAL_KEYSPAN_USA18X
368         bool "USB Keyspan USA-18X Firmware"
369         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
370         help
371           Say Y here to include firmware for the USA-18X converter.
372 
373 config USB_SERIAL_KEYSPAN_USA19W
374         bool "USB Keyspan USA-19W Firmware"
375         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
376         help
377           Say Y here to include firmware for the USA-19W converter.
378 
379 config USB_SERIAL_KEYSPAN_USA19QW
380         bool "USB Keyspan USA-19QW Firmware"
381         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
382         help
383           Say Y here to include firmware for the USA-19QW converter.
384 
385 config USB_SERIAL_KEYSPAN_USA19QI
386         bool "USB Keyspan USA-19QI Firmware"
387         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
388         help
389           Say Y here to include firmware for the USA-19QI converter.
390 
391 config USB_SERIAL_KEYSPAN_USA49W
392         bool "USB Keyspan USA-49W Firmware"
393         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
394         help
395           Say Y here to include firmware for the USA-49W converter.
396 
397 config USB_SERIAL_KEYSPAN_USA49WLC
398         bool "USB Keyspan USA-49WLC Firmware"
399         depends on USB_SERIAL_KEYSPAN && FIRMWARE_IN_KERNEL
400         help
401           Say Y here to include firmware for the USA-49WLC converter.
402 
403 config USB_SERIAL_KLSI
404         tristate "USB KL5KUSB105 (Palmconnect) Driver"
405         ---help---
406           Say Y here if you want to use a KL5KUSB105 - based single port
407           serial adapter. The most widely known -- and currently the only
408           tested -- device in this category is the PalmConnect USB Serial
409           adapter sold by Palm Inc. for use with their Palm III and Palm V
410           series PDAs.
411 
412           Please read <file:Documentation/usb/usb-serial.txt> for more
413           information.
414 
415           To compile this driver as a module, choose M here: the
416           module will be called kl5kusb105.
417 
418 config USB_SERIAL_KOBIL_SCT
419         tristate "USB KOBIL chipcard reader"
420         ---help---
421           Say Y here if you want to use one of the following KOBIL USB chipcard
422           readers:
423 
424             - USB TWIN
425             - KAAN Standard Plus
426             - KAAN SIM
427             - SecOVID Reader Plus
428             - B1 Professional
429             - KAAN Professional
430 
431           Note that you need a current CT-API.
432           To compile this driver as a module, choose M here: the
433           module will be called kobil_sct.
434 
435 config USB_SERIAL_MCT_U232
436         tristate "USB MCT Single Port Serial Driver"
437         ---help---
438           Say Y here if you want to use a USB Serial single port adapter from
439           Magic Control Technology Corp. (U232 is one of the model numbers).
440 
441           This driver also works with Sitecom U232-P25 and D-Link DU-H3SP USB
442           BAY, Belkin F5U109, and Belkin F5U409 devices.
443 
444           To compile this driver as a module, choose M here: the
445           module will be called mct_u232.
446 
447 config USB_SERIAL_METRO
448         tristate "USB Metrologic Instruments USB-POS Barcode Scanner Driver"
449         ---help---
450           Say Y here if you want to use a USB POS Metrologic barcode scanner.
451 
452           To compile this driver as a module, choose M here: the
453           module will be called metro-usb.
454 
455 config USB_SERIAL_MOS7720
456         tristate "USB Moschip 7720 Serial Driver"
457         ---help---
458           Say Y here if you want to use USB Serial single and double
459           port adapters from Moschip Semiconductor Tech.
460 
461           To compile this driver as a module, choose M here: the
462           module will be called mos7720.
463 
464 config USB_SERIAL_MOS7715_PARPORT
465         bool "Support for parallel port on the Moschip 7715"
466         depends on USB_SERIAL_MOS7720
467         depends on PARPORT=y || PARPORT=USB_SERIAL_MOS7720
468         select PARPORT_NOT_PC
469         ---help---
470         Say Y if you have a Moschip 7715 device and would like to use
471         the parallel port it provides.  The port will register with
472         the parport subsystem as a low-level driver.
473 
474 config USB_SERIAL_MOS7840
475         tristate "USB Moschip 7840/7820 USB Serial Driver"
476         ---help---
477           Say Y here if you want to use a MCS7840 Quad-Serial or MCS7820
478           Dual-Serial port device from MosChip Semiconductor.
479 
480           The MCS7840 and MCS7820 have been developed to connect a wide range
481           of standard serial devices to a USB host.  The MCS7840 has a USB
482           device controller connected to four (4) individual UARTs while the
483           MCS7820 controller connects to two (2) individual UARTs.
484 
485           To compile this driver as a module, choose M here: the
486           module will be called mos7840.  If unsure, choose N.
487 
488 config USB_SERIAL_MXUPORT
489         tristate "USB Moxa UPORT Serial Driver"
490         ---help---
491           Say Y here if you want to use a MOXA UPort Serial hub.
492 
493           This driver supports:
494 
495           [2 Port]
496           - UPort 1250 :  2 Port RS-232/422/485 USB to Serial Hub
497           - UPort 1250I : 2 Port RS-232/422/485 USB to Serial Hub with
498                           Isolation
499 
500           [4 Port]
501           - UPort 1410 :  4 Port RS-232 USB to Serial Hub
502           - UPort 1450 :  4 Port RS-232/422/485 USB to Serial Hub
503           - UPort 1450I : 4 Port RS-232/422/485 USB to Serial Hub with
504                           Isolation
505 
506           [8 Port]
507           - UPort 1610-8 : 8 Port RS-232 USB to Serial Hub
508           - UPort 1650-8 : 8 Port RS-232/422/485 USB to Serial Hub
509 
510           [16 Port]
511           - UPort 1610-16 : 16 Port RS-232 USB to Serial Hub
512           - UPort 1650-16 : 16 Port RS-232/422/485 USB to Serial Hub
513 
514           To compile this driver as a module, choose M here: the
515           module will be called mxuport.
516 
517 config USB_SERIAL_NAVMAN
518         tristate "USB Navman GPS device"
519         help
520           To compile this driver as a module, choose M here: the
521           module will be called navman.
522 
523 config USB_SERIAL_PL2303
524         tristate "USB Prolific 2303 Single Port Serial Driver"
525         help
526           Say Y here if you want to use the PL2303 USB Serial single port
527           adapter from Prolific.
528 
529           To compile this driver as a module, choose M here: the
530           module will be called pl2303.
531 
532 config USB_SERIAL_OTI6858
533         tristate "USB Ours Technology Inc. OTi-6858 USB To RS232 Bridge Controller"
534         help
535           Say Y here if you want to use the OTi-6858 single port USB to serial
536           converter device.
537 
538           To compile this driver as a module, choose M here: the
539           module will be called oti6858.
540 
541 config USB_SERIAL_QCAUX
542         tristate "USB Qualcomm Auxiliary Serial Port Driver"
543         help
544           Say Y here if you want to use the auxiliary serial ports provided
545           by many modems based on Qualcomm chipsets.  These ports often use
546           a proprietary protocol called DM and cannot be used for AT- or
547           PPP-based communication.
548 
549           To compile this driver as a module, choose M here: the
550           module will be called qcaux.  If unsure, choose N.
551 
552 config USB_SERIAL_QUALCOMM
553         tristate "USB Qualcomm Serial modem"
554         select USB_SERIAL_WWAN
555         help
556           Say Y here if you have a Qualcomm USB modem device.  These are
557           usually wireless cellular modems.
558 
559           To compile this driver as a module, choose M here: the
560           module will be called qcserial.
561 
562 config USB_SERIAL_SPCP8X5
563         tristate "USB SPCP8x5 USB To Serial Driver"
564         help
565           Say Y here if you want to use the spcp8x5 converter chip.  This is
566           commonly found in some Z-Wave USB devices.
567 
568           To compile this driver as a module, choose M here: the
569           module will be called spcp8x5.
570 
571 config USB_SERIAL_SAFE
572         tristate "USB Safe Serial (Encapsulated) Driver"
573 
574 config USB_SERIAL_SAFE_PADDED
575         bool "USB Secure Encapsulated Driver - Padded"
576         depends on USB_SERIAL_SAFE
577 
578 config USB_SERIAL_SIERRAWIRELESS
579         tristate "USB Sierra Wireless Driver"
580         help
581           Say M here if you want to use Sierra Wireless devices.
582 
583           Many devices have a feature known as TRU-Install. For those devices
584           to work properly, the USB Storage Sierra feature must be enabled.
585 
586           To compile this driver as a module, choose M here: the
587           module will be called sierra.
588 
589 config USB_SERIAL_SYMBOL
590         tristate "USB Symbol Barcode driver (serial mode)"
591         help
592           Say Y here if you want to use a Symbol USB Barcode device
593           in serial emulation mode.
594 
595           To compile this driver as a module, choose M here: the
596           module will be called symbolserial.
597 
598 config USB_SERIAL_TI
599         tristate "USB TI 3410/5052 Serial Driver"
600         help
601           Say Y here if you want to use the TI USB 3410 or 5052
602           serial devices.
603 
604           To compile this driver as a module, choose M here: the
605           module will be called ti_usb_3410_5052.
606 
607 config USB_SERIAL_CYBERJACK
608         tristate "USB REINER SCT cyberJack pinpad/e-com chipcard reader"
609         ---help---
610           Say Y here if you want to use a cyberJack pinpad/e-com USB chipcard
611           reader. This is an interface to ISO 7816 compatible contact-based
612           chipcards, e.g. GSM SIMs.
613 
614           To compile this driver as a module, choose M here: the
615           module will be called cyberjack.
616 
617           If unsure, say N.
618 
619 config USB_SERIAL_XIRCOM
620         tristate "USB Xircom / Entrega Single Port Serial Driver"
621         select USB_EZUSB_FX2
622         help
623           Say Y here if you want to use a Xircom or Entrega single port USB to
624           serial converter device.  This driver makes use of firmware
625           developed from scratch by Brian Warner.
626 
627           To compile this driver as a module, choose M here: the
628           module will be called keyspan_pda.
629 
630 config USB_SERIAL_WWAN
631         tristate
632 
633 config USB_SERIAL_OPTION
634         tristate "USB driver for GSM and CDMA modems"
635         select USB_SERIAL_WWAN
636         help
637           Say Y here if you have a GSM or CDMA modem that's connected to USB.
638 
639           This driver also supports several PCMCIA cards which have a
640           built-in OHCI-USB adapter and an internally-connected GSM modem.
641           The USB bus on these cards is not accessible externally.
642 
643           Supported devices include (some of?) those made by:
644           Option, Huawei, Audiovox, Novatel Wireless, or Anydata.
645 
646           To compile this driver as a module, choose M here: the
647           module will be called option.
648 
649           If this driver doesn't recognize your device,
650           it might be accessible via the FTDI_SIO driver.
651 
652 config USB_SERIAL_OMNINET
653         tristate "USB ZyXEL omni.net LCD Plus Driver"
654         help
655           Say Y here if you want to use a ZyXEL omni.net LCD ISDN TA.
656 
657           To compile this driver as a module, choose M here: the
658           module will be called omninet.
659 
660 config USB_SERIAL_OPTICON
661         tristate "USB Opticon Barcode driver (serial mode)"
662         help
663           Say Y here if you want to use a Opticon USB Barcode device
664           in serial emulation mode.
665 
666           To compile this driver as a module, choose M here: the
667           module will be called opticon.
668 
669 config USB_SERIAL_XSENS_MT
670         tristate "Xsens motion tracker serial interface driver"
671         help
672           Say Y here if you want to use Xsens motion trackers.
673 
674           This driver supports the new generation of motion trackers
675           by Xsens. Older devices can be accessed using the FTDI_SIO
676           driver.
677 
678           To compile this driver as a module, choose M here: the
679           module will be called xsens_mt.
680 
681 config USB_SERIAL_WISHBONE
682         tristate "USB-Wishbone adapter interface driver"
683         help
684           Say Y here if you want to use a USB attached Wishbone bus.
685 
686           Wishbone is an open hardware SoC bus commonly used in FPGA
687           designs. Bus access can be serialized using the Etherbone
688           protocol <http://www.ohwr.org/projects/etherbone-core>.
689 
690           This driver is intended to be used with devices which attach
691           their internal Wishbone bus to a USB serial interface using
692           the Etherbone protocol. A userspace library is required to
693           speak the protocol made available by this driver as ttyUSBx.
694 
695           To compile this driver as a module, choose M here: the
696           module will be called wishbone-serial.
697 
698 config USB_SERIAL_SSU100
699         tristate "USB Quatech SSU-100 Single Port Serial Driver"
700         help
701           Say Y here if you want to use the Quatech SSU-100 single
702           port usb to serial adapter.
703 
704           To compile this driver as a module, choose M here: the
705           module will be called ssu100.
706 
707 config USB_SERIAL_QT2
708         tristate "USB Quatech Serial Driver for USB 2 devices"
709         help
710           Say Y here if you want to use the Quatech USB 2
711           serial adapters.
712 
713           To compile this driver as a module, choose M here: the
714           module will be called quatech-serial.
715 
716 config USB_SERIAL_DEBUG
717         tristate "USB Debugging Device"
718         help
719           Say Y here if you have a USB debugging device used to receive
720           debugging data from another machine.  The most common of these
721           devices is the NetChip TurboCONNECT device.
722 
723           To compile this driver as a module, choose M here: the
724           module will be called usb-debug.
725 
726 endif # USB_SERIAL

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us