Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/usb/dwc3/Kconfig

  1 config USB_DWC3
  2         tristate "DesignWare USB3 DRD Core Support"
  3         depends on (USB || USB_GADGET) && HAS_DMA
  4         select USB_XHCI_PLATFORM if USB_SUPPORT && USB_XHCI_HCD
  5         help
  6           Say Y or M here if your system has a Dual Role SuperSpeed
  7           USB controller based on the DesignWare USB3 IP Core.
  8 
  9           If you choose to build this driver is a dynamically linked
 10           module, the module will be called dwc3.ko.
 11 
 12 if USB_DWC3
 13 
 14 choice
 15         bool "DWC3 Mode Selection"
 16         default USB_DWC3_DUAL_ROLE if (USB && USB_GADGET)
 17         default USB_DWC3_HOST if (USB && !USB_GADGET)
 18         default USB_DWC3_GADGET if (!USB && USB_GADGET)
 19 
 20 config USB_DWC3_HOST
 21         bool "Host only mode"
 22         depends on USB=y || USB=USB_DWC3
 23         help
 24           Select this when you want to use DWC3 in host mode only,
 25           thereby the gadget feature will be regressed.
 26 
 27 config USB_DWC3_GADGET
 28         bool "Gadget only mode"
 29         depends on USB_GADGET=y || USB_GADGET=USB_DWC3
 30         help
 31           Select this when you want to use DWC3 in gadget mode only,
 32           thereby the host feature will be regressed.
 33 
 34 config USB_DWC3_DUAL_ROLE
 35         bool "Dual Role mode"
 36         depends on ((USB=y || USB=USB_DWC3) && (USB_GADGET=y || USB_GADGET=USB_DWC3))
 37         help
 38           This is the default mode of working of DWC3 controller where
 39           both host and gadget features are enabled.
 40 
 41 endchoice
 42 
 43 comment "Platform Glue Driver Support"
 44 
 45 config USB_DWC3_OMAP
 46         tristate "Texas Instruments OMAP5 and similar Platforms"
 47         depends on EXTCON
 48         default USB_DWC3
 49         help
 50           Some platforms from Texas Instruments like OMAP5, DRA7xxx and
 51           AM437x use this IP for USB2/3 functionality.
 52 
 53           Say 'Y' or 'M' here if you have one such device
 54 
 55 config USB_DWC3_EXYNOS
 56         tristate "Samsung Exynos Platform"
 57         default USB_DWC3
 58         help
 59           Recent Exynos5 SoCs ship with one DesignWare Core USB3 IP inside,
 60           say 'Y' or 'M' if you have one such device.
 61 
 62 config USB_DWC3_PCI
 63         tristate "PCIe-based Platforms"
 64         depends on PCI
 65         default USB_DWC3
 66         help
 67           If you're using the DesignWare Core IP with a PCIe, please say
 68           'Y' or 'M' here.
 69 
 70           One such PCIe-based platform is Synopsys' PCIe HAPS model of
 71           this IP.
 72 
 73 config USB_DWC3_KEYSTONE
 74         tristate "Texas Instruments Keystone2 Platforms"
 75         default USB_DWC3
 76         help
 77           Support of USB2/3 functionality in TI Keystone2 platforms.
 78           Say 'Y' or 'M' here if you have one such device
 79 
 80 comment "Debugging features"
 81 
 82 config USB_DWC3_DEBUG
 83         bool "Enable Debugging Messages"
 84         help
 85           Say Y here to enable debugging messages on DWC3 Driver.
 86 
 87 config USB_DWC3_VERBOSE
 88         bool "Enable Verbose Debugging Messages"
 89         depends on USB_DWC3_DEBUG
 90         help
 91           Say Y here to enable verbose debugging messages on DWC3 Driver.
 92 
 93 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us