Version:  2.0.40 2.2.26 2.4.37 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18

Linux/drivers/usb/atm/Kconfig

  1 #
  2 # USB/ATM DSL configuration
  3 #
  4 
  5 menuconfig USB_ATM
  6         tristate "USB DSL modem support"
  7         depends on ATM
  8         select CRC32
  9         default n
 10         help
 11           Say Y here if you want to connect a USB Digital Subscriber Line (DSL)
 12           modem to your computer's USB port.  You will then need to choose your
 13           modem from the list below.
 14 
 15           To compile this driver as a module, choose M here: the
 16           module will be called usbatm.
 17 
 18 if USB_ATM
 19 
 20 config USB_SPEEDTOUCH
 21         tristate "Speedtouch USB support"
 22         select FW_LOADER
 23         help
 24           Say Y here if you have an SpeedTouch USB or SpeedTouch 330
 25           modem.  In order to use your modem you will need to install the 
 26           two parts of the firmware, extracted by the user space tools; see
 27           <http://www.linux-usb.org/SpeedTouch/> for details.
 28 
 29           To compile this driver as a module, choose M here: the
 30           module will be called speedtch.
 31 
 32 config USB_CXACRU
 33         tristate "Conexant AccessRunner USB support"
 34         select FW_LOADER
 35         help
 36           Say Y here if you have an ADSL USB modem based on the Conexant
 37           AccessRunner chipset.  In order to use your modem you will need to
 38           install the firmware, extracted by the user space tools; see
 39           <http://accessrunner.sourceforge.net/> for details.
 40 
 41           To compile this driver as a module, choose M here: the
 42           module will be called cxacru.
 43 
 44 config USB_UEAGLEATM
 45         tristate "ADI 930 and eagle USB DSL modem"
 46         select FW_LOADER
 47         help
 48           Say Y here if you have an ADSL USB modem based on the ADI 930
 49           or eagle chipset. In order to use your modem you will need to
 50           install firmwares and CMV (Command Management Variables); see
 51           <https://gna.org/projects/ueagleatm/> for details.
 52 
 53           To compile this driver as a module, choose M here: the
 54           module will be called ueagle-atm.
 55 
 56 config USB_XUSBATM
 57         tristate "Other USB DSL modem support"
 58         help
 59           Say Y here if you have a DSL USB modem not explicitly supported by
 60           another USB DSL drivers.  In order to use your modem you will need to
 61           pass the vendor ID, product ID, and endpoint numbers for transmission
 62           and reception as module parameters.  You may need to initialize
 63           the modem using a user space utility (a firmware loader for example).
 64 
 65           To compile this driver as a module, choose M here: the
 66           module will be called xusbatm.
 67 
 68 endif # USB_ATM

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us