Version:  2.0.40 2.2.26 2.4.37 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5

Linux/drivers/staging/comedi/Kconfig

  1 config COMEDI
  2         tristate "Data acquisition support (comedi)"
  3         depends on m
  4         ---help---
  5           Enable support for a wide range of data acquisition devices
  6           for Linux.
  7 
  8 if COMEDI
  9 
 10 config COMEDI_DEBUG
 11         bool "Comedi debugging"
 12         ---help---
 13           This is an option for use by developers; most people should
 14           say N here. This enables comedi core and driver debugging.
 15 
 16 config COMEDI_DEFAULT_BUF_SIZE_KB
 17         int "Comedi default initial asynchronous buffer size in KiB"
 18         default "2048"
 19         ---help---
 20           This is the default asynchronous buffer size which is used for
 21           commands running in the background in kernel space.  This
 22           defaults to 2048 KiB of memory so that a 16 channel card
 23           running at 10 kHz has of 2-4 seconds of buffer.
 24 
 25 config COMEDI_DEFAULT_BUF_MAXSIZE_KB
 26         int "Comedi default maximum asynchronous buffer size in KiB"
 27         default "20480"
 28         ---help---
 29           This is the default maximum asynchronous buffer size which can
 30           be requested by a userspace program without root privileges.
 31           This is set to 20480 KiB so that a fast I/O card with 16
 32           channels running at 100 kHz has 2-4 seconds of buffer.
 33 
 34 menuconfig COMEDI_MISC_DRIVERS
 35         bool "Comedi misc drivers"
 36         ---help---
 37           Enable comedi misc drivers to be built
 38 
 39           Note that the answer to this question won't directly affect the
 40           kernel: saying N will just cause the configurator to skip all
 41           the questions about misc non-hardware comedi drivers.
 42 
 43 if COMEDI_MISC_DRIVERS
 44 
 45 config COMEDI_BOND
 46         tristate "Comedi device bonding support"
 47         select COMEDI_KCOMEDILIB
 48         ---help---
 49           Enable support for a driver to 'bond' (merge) multiple subdevices
 50           from multiple devices together as one.
 51 
 52           Currently, it only handles digital I/O subdevices.
 53 
 54           To compile this driver as a module, choose M here: the module will be
 55           called comedi_bond.
 56 
 57 config COMEDI_TEST
 58         tristate "Fake waveform generator support"
 59         ---help---
 60           Enable support for the fake waveform generator.
 61           This driver is mainly for testing purposes, but can also be used to
 62           generate sample waveforms on systems that don't have data acquisition
 63           hardware.
 64 
 65           To compile this driver as a module, choose M here: the module will be
 66           called comedi_test.
 67 
 68 config COMEDI_PARPORT
 69         tristate "Parallel port support"
 70         ---help---
 71           Enable support for the standard parallel port.
 72           A cheap and easy way to get a few more digital I/O lines. Steal
 73           additional parallel ports from old computers or your neighbors'
 74           computers.
 75 
 76           To compile this driver as a module, choose M here: the module will be
 77           called comedi_parport.
 78 
 79 config COMEDI_SERIAL2002
 80         tristate "Driver for serial connected hardware"
 81         ---help---
 82           Enable support for serial connected hardware
 83 
 84           To compile this driver as a module, choose M here: the module will be
 85           called serial2002.
 86 
 87 config COMEDI_SSV_DNP
 88         tristate "SSV Embedded Systems DIL/Net-PC support"
 89         depends on X86_32 || COMPILE_TEST
 90         ---help---
 91           Enable support for SSV Embedded Systems DIL/Net-PC
 92 
 93           To compile this driver as a module, choose M here: the module will be
 94           called ssv_dnp.
 95 
 96 endif # COMEDI_MISC_DRIVERS
 97 
 98 menuconfig COMEDI_ISA_DRIVERS
 99         bool "Comedi ISA and PC/104 drivers"
100         ---help---
101           Enable comedi ISA and PC/104 drivers to be built
102 
103           Note that the answer to this question won't directly affect the
104           kernel: saying N will just cause the configurator to skip all
105           the questions about ISA and PC/104 comedi drivers.
106 
107 if COMEDI_ISA_DRIVERS
108 
109 config COMEDI_PCL711
110         tristate "Advantech PCL-711/711b and ADlink ACL-8112 ISA card support"
111         select COMEDI_8254
112         ---help---
113           Enable support for Advantech PCL-711 and 711b, ADlink ACL-8112
114 
115           To compile this driver as a module, choose M here: the module will be
116           called pcl711.
117 
118 config COMEDI_PCL724
119         tristate "Advantech PCL-722/724/731 and ADlink ACL-7122/7124/PET-48DIO"
120         select COMEDI_8255
121         ---help---
122           Enable support for ISA and PC/104 based 8255 digital i/o boards. This
123           driver provides a legacy comedi driver wrapper for the generic 8255
124           support driver.
125 
126           Supported boards include:
127             Advantech PCL-724            24 channels
128             Advantech PCL-722            144 (or 96) channels
129             Advantech PCL-731            48 channels
130             ADlink ACL-7122              144 (or 96) channels
131             ADlink ACL-7124              24 channels
132             ADlink PET-48DIO             48 channels
133             WinSystems PCM-IO48          48 channels (PC/104)
134             Diamond Systems ONYX-MM-DIO  48 channels (PC/104)
135 
136           To compile this driver as a module, choose M here: the module will be
137           called pcl724.
138 
139 config COMEDI_PCL726
140         tristate "Advantech PCL-726 and compatible ISA card support"
141         ---help---
142           Enable support for Advantech PCL-726 and compatible ISA cards.
143 
144           To compile this driver as a module, choose M here: the module will be
145           called pcl726.
146 
147 config COMEDI_PCL730
148         tristate "Simple Digital I/O board support (8-bit ports)"
149         ---help---
150           Enable support for various simple ISA or PC/104 Digital I/O boards.
151           These boards all use 8-bit I/O ports.
152 
153           Advantech PCL-730             iso - 16 in/16 out  ttl - 16 in/16 out
154           ICP ISO-730                   iso - 16 in/16 out  ttl - 16 in/16 out
155           ADlink ACL-7130               iso - 16 in/16 out  ttl - 16 in/16 out
156           Advantech PCM-3730            iso - 8 in/8 out    ttl - 16 in/16 out
157           Advantech PCL-725             iso - 8 in/8 out
158           ICP P8R8-DIO                  iso - 8 in/8 out
159           ADlink ACL-7225b              iso - 16 in/16 out
160           ICP P16R16-DIO                iso - 16 in/16 out
161           Advantech PCL-733             iso - 32 in
162           Advantech PCL-734             iso - 32 out
163           Diamond Systems OPMM-1616-XT  iso - 16 in/16 out
164           Diamond Systems PEARL-MM-P    iso - 16 out
165           Diamond Systems IR104-PBF     iso - 20 in/20 out
166 
167           To compile this driver as a module, choose M here: the module will be
168           called pcl730.
169 
170 config COMEDI_PCL812
171         tristate "Advantech PCL-812/813 and ADlink ACL-8112/8113/8113/8216"
172         select COMEDI_ISADMA if ISA_DMA_API
173         select COMEDI_8254
174         ---help---
175           Enable support for Advantech PCL-812/PG, PCL-813/B, ADLink
176           ACL-8112DG/HG/PG, ACL-8113, ACL-8216, ICP DAS A-821PGH/PGL/PGL-NDA,
177           A-822PGH/PGL, A-823PGH/PGL, A-826PG and ICP DAS ISO-813 ISA cards
178 
179           To compile this driver as a module, choose M here: the module will be
180           called pcl812.
181 
182 config COMEDI_PCL816
183         tristate "Advantech PCL-814 and PCL-816 ISA card support"
184         select COMEDI_ISADMA if ISA_DMA_API
185         select COMEDI_8254
186         ---help---
187           Enable support for Advantech PCL-814 and PCL-816 ISA cards
188 
189           To compile this driver as a module, choose M here: the module will be
190           called pcl816.
191 
192 config COMEDI_PCL818
193         tristate "Advantech PCL-718 and PCL-818 ISA card support"
194         select COMEDI_ISADMA if ISA_DMA_API
195         select COMEDI_8254
196         ---help---
197           Enable support for Advantech PCL-818 ISA cards
198           PCL-818L, PCL-818H, PCL-818HD, PCL-818HG, PCL-818 and PCL-718
199 
200           To compile this driver as a module, choose M here: the module will be
201           called pcl818.
202 
203 config COMEDI_PCM3724
204         tristate "Advantech PCM-3724 PC/104 card support"
205         select COMEDI_8255
206         ---help---
207           Enable support for Advantech PCM-3724 PC/104 cards.
208 
209           To compile this driver as a module, choose M here: the module will be
210           called pcm3724.
211 
212 config COMEDI_AMPLC_DIO200_ISA
213         tristate "Amplicon PC212E/PC214E/PC215E/PC218E/PC272E"
214         select COMEDI_AMPLC_DIO200
215         ---help---
216           Enable support for Amplicon PC212E, PC214E, PC215E, PC218E and
217           PC272E ISA DIO boards
218 
219           To compile this driver as a module, choose M here: the module will be
220           called amplc_dio200.
221 
222 config COMEDI_AMPLC_PC236_ISA
223         tristate "Amplicon PC36AT DIO board support"
224         select COMEDI_AMPLC_PC236
225         ---help---
226           Enable support for Amplicon PC36AT ISA DIO board.
227 
228           To compile this driver as a module, choose M here: the module will be
229           called amplc_pc236.
230 
231 config COMEDI_AMPLC_PC263_ISA
232         tristate "Amplicon PC263 relay board support"
233         ---help---
234           Enable support for Amplicon PC263 ISA relay board.  This board has
235           16 reed relay output channels.
236 
237           To compile this driver as a module, choose M here: the module will be
238           called amplc_pc263.
239 
240 config COMEDI_RTI800
241         tristate "Analog Devices RTI-800/815 ISA card support"
242         ---help---
243           Enable support for Analog Devices RTI-800/815 ISA cards
244 
245           To compile this driver as a module, choose M here: the module will be
246           called rti800.
247 
248 config COMEDI_RTI802
249         tristate "Analog Devices RTI-802 ISA card support"
250         ---help---
251           Enable support for Analog Devices RTI-802 ISA cards
252 
253           To compile this driver as a module, choose M here: the module will be
254           called rti802.
255 
256 config COMEDI_DAC02
257         tristate "Keithley Metrabyte DAC02 compatible ISA card support"
258         ---help---
259           Enable support for Keithley Metrabyte DAC02 compatible ISA cards.
260 
261           To compile this driver as a module, choose M here: the module will be
262           called dac02.
263 
264 config COMEDI_DAS16M1
265         tristate "MeasurementComputing CIO-DAS16/M1DAS-16 ISA card support"
266         select COMEDI_8254
267         select COMEDI_8255
268         ---help---
269           Enable support for Measurement Computing CIO-DAS16/M1 ISA cards.
270 
271           To compile this driver as a module, choose M here: the module will be
272           called das16m1.
273 
274 config COMEDI_DAS08_ISA
275         tristate "DAS-08 compatible ISA and PC/104 card support"
276         select COMEDI_DAS08
277         ---help---
278           Enable support for Keithley Metrabyte/ComputerBoards DAS08
279           and compatible ISA and PC/104 cards:
280           Keithley Metrabyte/ComputerBoards DAS08, DAS08-PGM, DAS08-PGH,
281           DAS08-PGL, DAS08-AOH, DAS08-AOL, DAS08-AOM, DAS08/JR-AO,
282           DAS08/JR-16-AO, PC104-DAS08, DAS08/JR/16.
283 
284           To compile this driver as a module, choose M here: the module will be
285           called das08_isa.
286 
287 config COMEDI_DAS16
288         tristate "DAS-16 compatible ISA and PC/104 card support"
289         select COMEDI_ISADMA if ISA_DMA_API
290         select COMEDI_8254
291         select COMEDI_8255
292         ---help---
293           Enable support for Keithley Metrabyte/ComputerBoards DAS16
294           and compatible ISA and PC/104 cards:
295           Keithley Metrabyte DAS-16, DAS-16G, DAS-16F, DAS-1201, DAS-1202,
296           DAS-1401, DAS-1402, DAS-1601, DAS-1602 and
297           ComputerBoards/MeasurementComputing PC104-DAS16/JR/,
298           PC104-DAS16JR/16, CIO-DAS16JR/16, CIO-DAS16/JR, CIO-DAS1401/12,
299           CIO-DAS1402/12, CIO-DAS1402/16, CIO-DAS1601/12, CIO-DAS1602/12,
300           CIO-DAS1602/16, CIO-DAS16/330
301 
302           To compile this driver as a module, choose M here: the module will be
303           called das16.
304 
305 config COMEDI_DAS800
306         tristate "DAS800 and compatible ISA card support"
307         select COMEDI_8254
308         ---help---
309           Enable support for Keithley Metrabyte DAS800 and compatible ISA cards
310           Keithley Metrabyte DAS-800, DAS-801, DAS-802
311           Measurement Computing CIO-DAS800, CIO-DAS801, CIO-DAS802 and
312           CIO-DAS802/16
313 
314           To compile this driver as a module, choose M here: the module will be
315           called das800.
316 
317 config COMEDI_DAS1800
318         tristate "DAS1800 and compatible ISA card support"
319         select COMEDI_ISADMA if ISA_DMA_API
320         select COMEDI_8254
321         ---help---
322           Enable support for DAS1800 and compatible ISA cards
323           Keithley Metrabyte DAS-1701ST, DAS-1701ST-DA, DAS-1701/AO,
324           DAS-1702ST, DAS-1702ST-DA, DAS-1702HR, DAS-1702HR-DA, DAS-1702/AO,
325           DAS-1801ST, DAS-1801ST-DA, DAS-1801HC, DAS-1801AO, DAS-1802ST,
326           DAS-1802ST-DA, DAS-1802HR, DAS-1802HR-DA, DAS-1802HC and
327           DAS-1802AO
328 
329           To compile this driver as a module, choose M here: the module will be
330           called das1800.
331 
332 config COMEDI_DAS6402
333         tristate "DAS6402 and compatible ISA card support"
334         select COMEDI_8254
335         ---help---
336           Enable support for DAS6402 and compatible ISA cards
337           Computerboards, Keithley Metrabyte DAS6402 and compatibles
338 
339           To compile this driver as a module, choose M here: the module will be
340           called das6402.
341 
342 config COMEDI_DT2801
343         tristate "Data Translation DT2801 ISA card support"
344         ---help---
345           Enable support for Data Translation DT2801 ISA cards
346 
347           To compile this driver as a module, choose M here: the module will be
348           called dt2801.
349 
350 config COMEDI_DT2811
351         tristate "Data Translation DT2811 ISA card support"
352         ---help---
353           Enable support for Data Translation DT2811 ISA cards
354 
355           To compile this driver as a module, choose M here: the module will be
356           called dt2811.
357 
358 config COMEDI_DT2814
359         tristate "Data Translation DT2814 ISA card support"
360         ---help---
361           Enable support for Data Translation DT2814 ISA cards
362 
363           To compile this driver as a module, choose M here: the module will be
364           called dt2814.
365 
366 config COMEDI_DT2815
367         tristate "Data Translation DT2815 ISA card support"
368         ---help---
369           Enable support for Data Translation DT2815 ISA cards
370 
371           To compile this driver as a module, choose M here: the module will be
372           called dt2815.
373 
374 config COMEDI_DT2817
375         tristate "Data Translation DT2817 ISA card support"
376         ---help---
377           Enable support for Data Translation DT2817 ISA cards
378 
379           To compile this driver as a module, choose M here: the module will be
380           called dt2817.
381 
382 config COMEDI_DT282X
383         tristate "Data Translation DT2821 series and DT-EZ ISA card support"
384         select COMEDI_ISADMA if ISA_DMA_API
385         ---help---
386           Enable support for Data Translation DT2821 series including DT-EZ
387           DT2821, DT2821-F-16SE, DT2821-F-8DI, DT2821-G-16SE, DT2821-G-8DI,
388           DT2823 (dt2823), DT2824-PGH, DT2824-PGL, DT2825, DT2827, DT2828,
389           DT21-EZ, DT23-EZ, DT24-EZ and DT24-EZ-PGL
390 
391           To compile this driver as a module, choose M here: the module will be
392           called dt282x.
393 
394 config COMEDI_DMM32AT
395         tristate "Diamond Systems MM-32-AT PC/104 board support"
396         select COMEDI_8255
397         ---help---
398           Enable support for Diamond Systems MM-32-AT PC/104 boards
399 
400           To compile this driver as a module, choose M here: the module will be
401           called dmm32at.
402 
403 config COMEDI_FL512
404         tristate "FL512 ISA card support"
405         ---help---
406           Enable support for FL512 ISA card
407 
408           To compile this driver as a module, choose M here: the module will be
409           called fl512.
410 
411 config COMEDI_AIO_AIO12_8
412         tristate "I/O Products PC/104 AIO12-8 Analog I/O Board support"
413         select COMEDI_8254
414         select COMEDI_8255
415         ---help---
416           Enable support for I/O Products PC/104 AIO12-8 Analog I/O Board
417 
418           To compile this driver as a module, choose M here: the module will be
419           called aio_aio12_8.
420 
421 config COMEDI_AIO_IIRO_16
422         tristate "I/O Products PC/104 IIRO16 Board support"
423         ---help---
424           Enable support for I/O Products PC/104 IIRO16 Relay And Isolated
425           Input Board
426 
427           To compile this driver as a module, choose M here: the module will be
428           called aio_iiro_16.
429 
430 config COMEDI_II_PCI20KC
431         tristate "Intelligent Instruments PCI-20001C carrier support"
432         depends on HAS_IOMEM
433         ---help---
434           Enable support for Intelligent Instruments PCI-20001C carrier
435           PCI-20001, PCI-20006 and PCI-20341
436 
437           To compile this driver as a module, choose M here: the module will be
438           called ii_pci20kc.
439 
440 config COMEDI_C6XDIGIO
441         tristate "Mechatronic Systems Inc. C6x_DIGIO DSP daughter card support"
442         ---help---
443           Enable support for Mechatronic Systems Inc. C6x_DIGIO DSP daughter
444           card
445 
446           To compile this driver as a module, choose M here: the module will be
447           called c6xdigio.
448 
449 config COMEDI_MPC624
450         tristate "Micro/sys MPC-624 PC/104 board support"
451         ---help---
452           Enable support for Micro/sys MPC-624 PC/104 board
453 
454           To compile this driver as a module, choose M here: the module will be
455           called mpc624.
456 
457 config COMEDI_ADQ12B
458         tristate "MicroAxial ADQ12-B data acquisition and control card support"
459         ---help---
460           Enable MicroAxial ADQ12-B daq and control card support.
461 
462           To compile this driver as a module, choose M here: the module will be
463           called adq12b.
464 
465 config COMEDI_NI_AT_A2150
466         tristate "NI AT-A2150 ISA card support"
467         select COMEDI_ISADMA if ISA_DMA_API
468         select COMEDI_8254
469         ---help---
470           Enable support for National Instruments AT-A2150 cards
471 
472           To compile this driver as a module, choose M here: the module will be
473           called ni_at_a2150.
474 
475 config COMEDI_NI_AT_AO
476         tristate "NI AT-AO-6/10 EISA card support"
477         select COMEDI_8254
478         ---help---
479           Enable support for National Instruments AT-AO-6/10 cards
480 
481           To compile this driver as a module, choose M here: the module will be
482           called ni_at_ao.
483 
484 config COMEDI_NI_ATMIO
485         tristate "NI AT-MIO E series ISA-PNP card support"
486         select COMEDI_8255
487         select COMEDI_NI_TIO
488         ---help---
489           Enable support for National Instruments AT-MIO E series cards
490           National Instruments AT-MIO-16E-1 (ni_atmio),
491           AT-MIO-16E-2, AT-MIO-16E-10, AT-MIO-16DE-10, AT-MIO-64E-3,
492           AT-MIO-16XE-50, AT-MIO-16XE-10, AT-AI-16XE-10
493 
494           To compile this driver as a module, choose M here: the module will be
495           called ni_atmio.
496 
497 config COMEDI_NI_ATMIO16D
498         tristate "NI AT-MIO-16/AT-MIO-16D series ISA card support"
499         select COMEDI_8255
500         ---help---
501           Enable support for National Instruments AT-MIO-16/AT-MIO-16D cards.
502 
503           To compile this driver as a module, choose M here: the module will be
504           called ni_atmio16d.
505 
506 config COMEDI_NI_LABPC_ISA
507         tristate "NI Lab-PC and compatibles ISA support"
508         select COMEDI_NI_LABPC
509         select COMEDI_NI_LABPC_ISADMA if ISA_DMA_API
510         ---help---
511           Enable support for National Instruments Lab-PC and compatibles
512           Lab-PC-1200, Lab-PC-1200AI, Lab-PC+.
513           Kernel-level ISA plug-and-play support for the lab-pc-1200 boards has
514           not yet been added to the driver.
515 
516           To compile this driver as a module, choose M here: the module will be
517           called ni_labpc.
518 
519 config COMEDI_PCMAD
520         tristate "Winsystems PCM-A/D12 and PCM-A/D16 PC/104 board support"
521         ---help---
522           Enable support for Winsystems PCM-A/D12 and PCM-A/D16 PC/104 boards.
523 
524           To compile this driver as a module, choose M here: the module will be
525           called pcmad.
526 
527 config COMEDI_PCMDA12
528         tristate "Winsystems PCM-D/A-12 8-channel AO PC/104 board support"
529         ---help---
530           Enable support for Winsystems PCM-D/A-12 8-channel AO PC/104 boards.
531           Note that the board is not ISA-PNP capable and thus needs the I/O
532           port comedi_config parameter.
533 
534           To compile this driver as a module, choose M here: the module will be
535           called pcmda12.
536 
537 config COMEDI_PCMMIO
538         tristate "Winsystems PCM-MIO PC/104 board support"
539         ---help---
540           Enable support for Winsystems PCM-MIO multifunction PC/104 boards.
541 
542           To compile this driver as a module, choose M here: the module will be
543           called pcmmio.
544 
545 config COMEDI_PCMUIO
546         tristate "Winsystems PCM-UIO48A and PCM-UIO96A PC/104 board support"
547         ---help---
548           Enable support for PCM-UIO48A and PCM-UIO96A PC/104 boards.
549 
550           To compile this driver as a module, choose M here: the module will be
551           called pcmuio.
552 
553 config COMEDI_MULTIQ3
554         tristate "Quanser Consulting MultiQ-3 ISA card support"
555         ---help---
556           Enable support for Quanser Consulting MultiQ-3 ISA cards
557 
558           To compile this driver as a module, choose M here: the module will be
559           called multiq3.
560 
561 config COMEDI_S526
562         tristate "Sensoray s526 support"
563         ---help---
564           Enable support for Sensoray s526
565 
566           To compile this driver as a module, choose M here: the module will be
567           called s526.
568 
569 endif # COMEDI_ISA_DRIVERS
570 
571 menuconfig COMEDI_PCI_DRIVERS
572         tristate "Comedi PCI drivers"
573         depends on PCI
574         ---help---
575           Enable support for comedi PCI drivers.
576 
577           To compile this support as a module, choose M here: the module will
578           be called comedi_pci.
579 
580 if COMEDI_PCI_DRIVERS
581 
582 config COMEDI_8255_PCI
583         tristate "Generic PCI based 8255 digital i/o board support"
584         select COMEDI_8255
585         ---help---
586           Enable support for PCI based 8255 digital i/o boards. This driver
587           provides a PCI wrapper around the generic 8255 driver.
588 
589           Supported boards:
590             ADlink - PCI-7224, PCI-7248, and PCI-7296
591             Measurement Computing - PCI-DIO24, PCI-DIO24H, PCI-DIO48H and
592                                     PCI-DIO96H
593             National Instruments - PCI-DIO-96, PCI-DIO-96B, PXI-6508, PCI-6503,
594                                    PCI-6503B, PCI-6503X, and PXI-6503
595 
596           To compile this driver as a module, choose M here: the module will
597           be called 8255_pci.
598 
599 config COMEDI_ADDI_WATCHDOG
600         tristate
601         ---help---
602           Provides support for the watchdog subdevice found on many ADDI-DATA
603           boards. This module will be automatically selected when needed. The
604           module will be called addi_watchdog.
605 
606 config COMEDI_ADDI_APCI_1032
607         tristate "ADDI-DATA APCI_1032 support"
608         ---help---
609           Enable support for ADDI-DATA APCI_1032 cards
610 
611           To compile this driver as a module, choose M here: the module will be
612           called addi_apci_1032.
613 
614 config COMEDI_ADDI_APCI_1500
615         tristate "ADDI-DATA APCI_1500 support"
616         ---help---
617           Enable support for ADDI-DATA APCI_1500 cards
618 
619           To compile this driver as a module, choose M here: the module will be
620           called addi_apci_1500.
621 
622 config COMEDI_ADDI_APCI_1516
623         tristate "ADDI-DATA APCI-1016/1516/2016 support"
624         select COMEDI_ADDI_WATCHDOG
625         ---help---
626           Enable support for ADDI-DATA APCI-1016, APCI-1516 and APCI-2016 boards.
627           These are 16 channel, optically isolated, digital I/O boards. The 1516
628           and 2016 boards also have a watchdog for resetting the outputs to "0".
629 
630           To compile this driver as a module, choose M here: the module will be
631           called addi_apci_1516.
632 
633 config COMEDI_ADDI_APCI_1564
634         tristate "ADDI-DATA APCI_1564 support"
635         select COMEDI_ADDI_WATCHDOG
636         ---help---
637           Enable support for ADDI-DATA APCI_1564 cards
638 
639           To compile this driver as a module, choose M here: the module will be
640           called addi_apci_1564.
641 
642 config COMEDI_ADDI_APCI_16XX
643         tristate "ADDI-DATA APCI_16xx support"
644         ---help---
645           Enable support for ADDI-DATA APCI_16xx cards
646 
647           To compile this driver as a module, choose M here: the module will be
648           called addi_apci_16xx.
649 
650 config COMEDI_ADDI_APCI_2032
651         tristate "ADDI-DATA APCI_2032 support"
652         select COMEDI_ADDI_WATCHDOG
653         ---help---
654           Enable support for ADDI-DATA APCI_2032 cards
655 
656           To compile this driver as a module, choose M here: the module will be
657           called addi_apci_2032.
658 
659 config COMEDI_ADDI_APCI_2200
660         tristate "ADDI-DATA APCI_2200 support"
661         select COMEDI_ADDI_WATCHDOG
662         ---help---
663           Enable support for ADDI-DATA APCI_2200 cards
664 
665           To compile this driver as a module, choose M here: the module will be
666           called addi_apci_2200.
667 
668 config COMEDI_ADDI_APCI_3120
669         tristate "ADDI-DATA APCI_3120/3001 support"
670         depends on HAS_DMA
671         ---help---
672           Enable support for ADDI-DATA APCI_3120/3001 cards
673 
674           To compile this driver as a module, choose M here: the module will be
675           called addi_apci_3120.
676 
677 config COMEDI_ADDI_APCI_3501
678         tristate "ADDI-DATA APCI_3501 support"
679         ---help---
680           Enable support for ADDI-DATA APCI_3501 cards
681 
682           To compile this driver as a module, choose M here: the module will be
683           called addi_apci_3501.
684 
685 config COMEDI_ADDI_APCI_3XXX
686         tristate "ADDI-DATA APCI_3xxx support"
687         ---help---
688           Enable support for ADDI-DATA APCI_3xxx cards
689 
690           To compile this driver as a module, choose M here: the module will be
691           called addi_apci_3xxx.
692 
693 config COMEDI_ADL_PCI6208
694         tristate "ADLink PCI-6208A support"
695         ---help---
696           Enable support for ADLink PCI-6208A cards
697 
698           To compile this driver as a module, choose M here: the module will be
699           called adl_pci6208.
700 
701 config COMEDI_ADL_PCI7X3X
702         tristate "ADLink PCI-723X/743X isolated digital i/o board support"
703         ---help---
704           Enable support for ADlink PCI-723X/743X isolated digital i/o boards.
705           Supported boards include the 32-channel PCI-7230 (16 in/16 out),
706           PCI-7233 (32 in), and PCI-7234 (32 out) as well as the 64-channel
707           PCI-7432 (32 in/32 out), PCI-7433 (64 in), and PCI-7434 (64 out).
708 
709           To compile this driver as a module, choose M here: the module will be
710           called adl_pci7x3x.
711 
712 config COMEDI_ADL_PCI8164
713         tristate "ADLink PCI-8164 4 Axes Motion Control board support"
714         ---help---
715           Enable support for ADlink PCI-8164 4 Axes Motion Control board
716 
717           To compile this driver as a module, choose M here: the module will be
718           called adl_pci8164.
719 
720 config COMEDI_ADL_PCI9111
721         tristate "ADLink PCI-9111HR support"
722         select COMEDI_8254
723         ---help---
724           Enable support for ADlink PCI9111 cards
725 
726           To compile this driver as a module, choose M here: the module will be
727           called adl_pci9111.
728 
729 config COMEDI_ADL_PCI9118
730         tristate "ADLink PCI-9118DG, PCI-9118HG, PCI-9118HR support"
731         depends on HAS_DMA
732         select COMEDI_8254
733         ---help---
734           Enable support for ADlink PCI-9118DG, PCI-9118HG, PCI-9118HR cards
735 
736           To compile this driver as a module, choose M here: the module will be
737           called adl_pci9118.
738 
739 config COMEDI_ADV_PCI1710
740         tristate "Advantech PCI-171x and PCI-1731 support"
741         select COMEDI_8254
742         ---help---
743           Enable support for Advantech PCI-1710, PCI-1710HG, PCI-1711,
744           PCI-1713 and PCI-1731
745 
746           To compile this driver as a module, choose M here: the module will be
747           called adv_pci1710.
748 
749 config COMEDI_ADV_PCI1720
750         tristate "Advantech PCI-1720 support"
751         ---help---
752           Enable support for Advantech PCI-1720 Analog Output board.
753 
754           To compile this driver as a module, choose M here: the module will be
755           called adv_pci1720.
756 
757 config COMEDI_ADV_PCI1723
758         tristate "Advantech PCI-1723 support"
759         ---help---
760           Enable support for Advantech PCI-1723 cards
761 
762           To compile this driver as a module, choose M here: the module will be
763           called adv_pci1723.
764 
765 config COMEDI_ADV_PCI1724
766         tristate "Advantech PCI-1724U support"
767         ---help---
768           Enable support for Advantech PCI-1724U cards.  These are 32-channel
769           analog output cards with voltage and current loop output ranges and
770           14-bit resolution.
771 
772           To compile this driver as a module, choose M here: the module will be
773           called adv_pci1724.
774 
775 config COMEDI_ADV_PCI1760
776         tristate "Advantech PCI-1760 support"
777         ---help---
778           Enable support for Advantech PCI-1760 board.
779 
780           To compile this driver as a module, choose M here: the module will be
781           called adv_pci1760.
782 
783 config COMEDI_ADV_PCI_DIO
784         tristate "Advantech PCI DIO card support"
785         select COMEDI_8254
786         select COMEDI_8255
787         ---help---
788           Enable support for Advantech PCI DIO cards
789           PCI-1730, PCI-1733, PCI-1734, PCI-1735U, PCI-1736UP, PCI-1739U,
790           PCI-1750, PCI-1751, PCI-1752, PCI-1753/E, PCI-1754, PCI-1756 and
791           PCI-1762
792 
793           To compile this driver as a module, choose M here: the module will be
794           called adv_pci_dio.
795 
796 config COMEDI_AMPLC_DIO200_PCI
797         tristate "Amplicon PCI215/PCI272/PCIe215/PCIe236/PCIe296 DIO support"
798         select COMEDI_AMPLC_DIO200
799         ---help---
800           Enable support for Amplicon PCI215, PCI272, PCIe215, PCIe236
801           and PCIe296 DIO boards.
802 
803           To compile this driver as a module, choose M here: the module will be
804           called amplc_dio200_pci.
805 
806 config COMEDI_AMPLC_PC236_PCI
807         tristate "Amplicon PCI236 DIO board support"
808         select COMEDI_AMPLC_PC236
809         ---help---
810           Enable support for Amplicon PCI236 DIO board.
811 
812           To compile this driver as a module, choose M here: the module will be
813           called amplc_pci236.
814 
815 config COMEDI_AMPLC_PC263_PCI
816         tristate "Amplicon PCI263 relay board support"
817         ---help---
818           Enable support for Amplicon PCI263 relay board.  This is a PCI board
819           with 16 reed relay output channels.
820 
821           To compile this driver as a module, choose M here: the module will be
822           called amplc_pci263.
823 
824 config COMEDI_AMPLC_PCI224
825         tristate "Amplicon PCI224 and PCI234 support"
826         select COMEDI_8254
827         ---help---
828           Enable support for Amplicon PCI224 and PCI234 AO boards
829 
830           To compile this driver as a module, choose M here: the module will be
831           called amplc_pci224.
832 
833 config COMEDI_AMPLC_PCI230
834         tristate "Amplicon PCI230 and PCI260 support"
835         select COMEDI_8254
836         select COMEDI_8255
837         ---help---
838           Enable support for Amplicon PCI230 and PCI260 Multifunction I/O
839           boards
840 
841           To compile this driver as a module, choose M here: the module will be
842           called amplc_pci230.
843 
844 config COMEDI_CONTEC_PCI_DIO
845         tristate "Contec PIO1616L digital I/O board support"
846         ---help---
847           Enable support for the Contec PIO1616L digital I/O board
848 
849           To compile this driver as a module, choose M here: the module will be
850           called contec_pci_dio.
851 
852 config COMEDI_DAS08_PCI
853         tristate "DAS-08 PCI support"
854         select COMEDI_DAS08
855         ---help---
856           Enable support for PCI DAS-08 cards.
857 
858           To compile this driver as a module, choose M here: the module will be
859           called das08_pci.
860 
861 config COMEDI_DT3000
862         tristate "Data Translation DT3000 series support"
863         ---help---
864           Enable support for Data Translation DT3000 series
865           DT3001, DT3001-PGL, DT3002, DT3003, DT3003-PGL, DT3004, DT3005 and
866           DT3004-200
867 
868           To compile this driver as a module, choose M here: the module will be
869           called dt3000.
870 
871 config COMEDI_DYNA_PCI10XX
872         tristate "Dynalog PCI DAQ series support"
873         ---help---
874           Enable support for Dynalog PCI DAQ series
875           PCI-1050
876 
877           To compile this driver as a module, choose M here: the module will be
878           called dyna_pci10xx.
879 
880 config COMEDI_GSC_HPDI
881         tristate "General Standards PCI-HPDI32 / PMC-HPDI32 support"
882         ---help---
883           Enable support for General Standards Corporation high speed parallel
884           digital interface rs485 boards PCI-HPDI32 and PMC-HPDI32.
885           Only receive mode works, transmit not supported.
886 
887           To compile this driver as a module, choose M here: the module will be
888           called gsc_hpdi.
889 
890 config COMEDI_MF6X4
891         tristate "Humusoft MF634 and MF624 DAQ Card support"
892         ---help---
893           This driver supports both Humusoft MF634 and MF624 Data acquisition
894           cards. The legacy Humusoft MF614 card is not supported.
895 
896 config COMEDI_ICP_MULTI
897         tristate "Inova ICP_MULTI support"
898         ---help---
899           Enable support for Inova ICP_MULTI card
900 
901           To compile this driver as a module, choose M here: the module will be
902           called icp_multi.
903 
904 config COMEDI_DAQBOARD2000
905         tristate "IOtech DAQboard/2000 support"
906         select COMEDI_8255
907         ---help---
908           Enable support for the IOtech DAQboard/2000
909 
910           To compile this driver as a module, choose M here: the module will be
911           called daqboard2000.
912 
913 config COMEDI_JR3_PCI
914         tristate "JR3/PCI force sensor board support"
915         ---help---
916           Enable support for JR3/PCI force sensor boards
917 
918           To compile this driver as a module, choose M here: the module will be
919           called jr3_pci.
920 
921 config COMEDI_KE_COUNTER
922         tristate "Kolter-Electronic PCI Counter 1 card support"
923         ---help---
924           Enable support for Kolter-Electronic PCI Counter 1 cards
925 
926           To compile this driver as a module, choose M here: the module will be
927           called ke_counter.
928 
929 config COMEDI_CB_PCIDAS64
930         tristate "MeasurementComputing PCI-DAS 64xx, 60xx, and 4020 support"
931         select COMEDI_8255
932         ---help---
933           Enable support for ComputerBoards/MeasurementComputing PCI-DAS 64xx,
934           60xx, and 4020 series with the PLX 9080 PCI controller
935 
936           To compile this driver as a module, choose M here: the module will be
937           called cb_pcidas64.
938 
939 config COMEDI_CB_PCIDAS
940         tristate "MeasurementComputing PCI-DAS support"
941         select COMEDI_8254
942         select COMEDI_8255
943         ---help---
944           Enable support for ComputerBoards/MeasurementComputing PCI-DAS with
945           AMCC S5933 PCIcontroller: PCI-DAS1602/16, PCI-DAS1602/16jr,
946           PCI-DAS1602/12, PCI-DAS1200, PCI-DAS1200jr, PCI-DAS1000, PCI-DAS1001
947           and PCI_DAS1002.
948 
949           To compile this driver as a module, choose M here: the module will be
950           called cb_pcidas.
951 
952 config COMEDI_CB_PCIDDA
953         tristate "MeasurementComputing PCI-DDA series support"
954         select COMEDI_8255
955         ---help---
956           Enable support for ComputerBoards/MeasurementComputing PCI-DDA
957           series: PCI-DDA08/12, PCI-DDA04/12, PCI-DDA02/12, PCI-DDA08/16,
958           PCI-DDA04/16 and PCI-DDA02/16
959 
960           To compile this driver as a module, choose M here: the module will be
961           called cb_pcidda.
962 
963 config COMEDI_CB_PCIMDAS
964         tristate "MeasurementComputing PCIM-DAS1602/16, PCIe-DAS1602/16 support"
965         select COMEDI_8254
966         select COMEDI_8255
967         ---help---
968           Enable support for ComputerBoards/MeasurementComputing PCI Migration
969           series PCIM-DAS1602/16 and PCIe-DAS1602/16.
970 
971           To compile this driver as a module, choose M here: the module will be
972           called cb_pcimdas.
973 
974 config COMEDI_CB_PCIMDDA
975         tristate "MeasurementComputing PCIM-DDA06-16 support"
976         select COMEDI_8255
977         ---help---
978           Enable support for ComputerBoards/MeasurementComputing PCIM-DDA06-16
979 
980           To compile this driver as a module, choose M here: the module will be
981           called cb_pcimdda.
982 
983 config COMEDI_ME4000
984         tristate "Meilhaus ME-4000 support"
985         select COMEDI_8254
986         ---help---
987           Enable support for Meilhaus PCI data acquisition cards
988           ME-4650, ME-4670i, ME-4680, ME-4680i and ME-4680is
989 
990           To compile this driver as a module, choose M here: the module will be
991           called me4000.
992 
993 config COMEDI_ME_DAQ
994         tristate "Meilhaus ME-2000i, ME-2600i, ME-3000vm1 support"
995         ---help---
996           Enable support for Meilhaus PCI data acquisition cards
997           ME-2000i, ME-2600i and ME-3000vm1
998 
999           To compile this driver as a module, choose M here: the module will be
1000           called me_daq.
1001 
1002 config COMEDI_NI_6527
1003         tristate "NI 6527 support"
1004         ---help---
1005           Enable support for the National Instruments 6527 PCI card
1006 
1007           To compile this driver as a module, choose M here: the module will be
1008           called ni_6527.
1009 
1010 config COMEDI_NI_65XX
1011         tristate "NI 65xx static dio PCI card support"
1012         ---help---
1013           Enable support for National Instruments 65xx static dio boards.
1014           Supported devices: National Instruments PCI-6509 (ni_65xx),
1015           PXI-6509, PCI-6510, PCI-6511, PXI-6511, PCI-6512, PXI-6512, PCI-6513,
1016           PXI-6513, PCI-6514, PXI-6514, PCI-6515, PXI-6515, PCI-6516, PCI-6517,
1017           PCI-6518, PCI-6519, PCI-6520, PCI-6521, PXI-6521, PCI-6528, PXI-6528
1018 
1019           To compile this driver as a module, choose M here: the module will be
1020           called ni_65xx.
1021 
1022 config COMEDI_NI_660X
1023         tristate "NI 660x counter/timer PCI card support"
1024         depends on HAS_DMA
1025         select COMEDI_NI_TIOCMD
1026         ---help---
1027           Enable support for National Instruments PCI-6601 (ni_660x), PCI-6602,
1028           PXI-6602, PXI-6608 and PXI-6624.
1029 
1030           To compile this driver as a module, choose M here: the module will be
1031           called ni_660x.
1032 
1033 config COMEDI_NI_670X
1034         tristate "NI 670x PCI card support"
1035         ---help---
1036           Enable support for National Instruments PCI-6703 and PCI-6704
1037 
1038           To compile this driver as a module, choose M here: the module will be
1039           called ni_670x.
1040 
1041 config COMEDI_NI_LABPC_PCI
1042         tristate "NI Lab-PC PCI-1200 support"
1043         select COMEDI_NI_LABPC
1044         ---help---
1045           Enable support for National Instruments Lab-PC PCI-1200.
1046 
1047           To compile this driver as a module, choose M here: the module will be
1048           called ni_labpc_pci.
1049 
1050 config COMEDI_NI_PCIDIO
1051         tristate "NI PCI-DIO32HS, PCI-6533, PCI-6534 support"
1052         depends on HAS_DMA
1053         select COMEDI_MITE
1054         select COMEDI_8255
1055         ---help---
1056           Enable support for National Instruments PCI-DIO-32HS, PXI-6533,
1057           PCI-6533 and PCI-6534
1058 
1059           To compile this driver as a module, choose M here: the module will be
1060           called ni_pcidio.
1061 
1062 config COMEDI_NI_PCIMIO
1063         tristate "NI PCI-MIO-E series and M series support"
1064         depends on HAS_DMA
1065         select COMEDI_NI_TIOCMD
1066         select COMEDI_8255
1067         ---help---
1068           Enable support for National Instruments PCI-MIO-E series and M series
1069           (all boards): PCI-MIO-16XE-10, PXI-6030E, PCI-MIO-16E-1,
1070           PCI-MIO-16E-4, PCI-6014, PCI-6040E, PXI-6040E, PCI-6030E, PCI-6031E,
1071           PCI-6032E, PCI-6033E, PCI-6071E, PCI-6023E, PCI-6024E, PCI-6025E,
1072           PXI-6025E, PCI-6034E, PCI-6035E, PCI-6052E, PCI-6110, PCI-6111,
1073           PCI-6220, PCI-6221, PCI-6224, PXI-6224, PCI-6225, PXI-6225, PCI-6229,
1074           PCI-6250, PCI-6251, PCIe-6251, PCI-6254, PCI-6259, PCIe-6259,
1075           PCI-6280, PCI-6281, PXI-6281, PCI-6284, PCI-6289, PCI-6711, PXI-6711,
1076           PCI-6713, PXI-6713, PXI-6071E, PCI-6070E, PXI-6070E, PXI-6052E,
1077           PCI-6036E, PCI-6731, PCI-6733, PXI-6733, PCI-6143, PXI-6143
1078 
1079           To compile this driver as a module, choose M here: the module will be
1080           called ni_pcimio.
1081 
1082 config COMEDI_RTD520
1083         tristate "Real Time Devices PCI4520/DM7520 support"
1084         select COMEDI_8254
1085         ---help---
1086           Enable support for Real Time Devices PCI4520/DM7520
1087 
1088           To compile this driver as a module, choose M here: the module will be
1089           called rtd520.
1090 
1091 config COMEDI_S626
1092         tristate "Sensoray 626 support"
1093         ---help---
1094           Enable support for Sensoray 626
1095 
1096           To compile this driver as a module, choose M here: the module will be
1097           called s626.
1098 
1099 config COMEDI_MITE
1100         depends on HAS_DMA
1101         tristate
1102 
1103 config COMEDI_NI_TIOCMD
1104         tristate
1105         depends on HAS_DMA
1106         select COMEDI_NI_TIO
1107         select COMEDI_MITE
1108 
1109 endif # COMEDI_PCI_DRIVERS
1110 
1111 menuconfig COMEDI_PCMCIA_DRIVERS
1112         tristate "Comedi PCMCIA drivers"
1113         depends on PCMCIA
1114         ---help---
1115           Enable support for comedi PCMCIA drivers.
1116 
1117           To compile this support as a module, choose M here: the module will
1118           be called comedi_pcmcia.
1119 
1120 if COMEDI_PCMCIA_DRIVERS
1121 
1122 config COMEDI_CB_DAS16_CS
1123         tristate "CB DAS16 series PCMCIA support"
1124         select COMEDI_8254
1125         ---help---
1126           Enable support for the ComputerBoards/MeasurementComputing PCMCIA
1127           cards DAS16/16, PCM-DAS16D/12 and PCM-DAS16s/16
1128 
1129           To compile this driver as a module, choose M here: the module will be
1130           called cb_das16_cs.
1131 
1132 config COMEDI_DAS08_CS
1133         tristate "CB DAS08 PCMCIA support"
1134         select COMEDI_DAS08
1135         ---help---
1136           Enable support for the ComputerBoards/MeasurementComputing DAS-08
1137           PCMCIA card
1138 
1139           To compile this driver as a module, choose M here: the module will be
1140           called das08_cs.
1141 
1142 config COMEDI_NI_DAQ_700_CS
1143         tristate "NI DAQCard-700 PCMCIA support"
1144         ---help---
1145           Enable support for the National Instruments PCMCIA DAQCard-700 DIO
1146 
1147           To compile this driver as a module, choose M here: the module will be
1148           called ni_daq_700.
1149 
1150 config COMEDI_NI_DAQ_DIO24_CS
1151         tristate "NI DAQ-Card DIO-24 PCMCIA support"
1152         select COMEDI_8255
1153         ---help---
1154           Enable support for the National Instruments PCMCIA DAQ-Card DIO-24
1155 
1156           To compile this driver as a module, choose M here: the module will be
1157           called ni_daq_dio24.
1158 
1159 config COMEDI_NI_LABPC_CS
1160         tristate "NI DAQCard-1200 PCMCIA support"
1161         select COMEDI_NI_LABPC
1162         ---help---
1163           Enable support for the National Instruments PCMCIA DAQCard-1200
1164 
1165           To compile this driver as a module, choose M here: the module will be
1166           called ni_labpc_cs.
1167 
1168 config COMEDI_NI_MIO_CS
1169         tristate "NI DAQCard E series PCMCIA support"
1170         select COMEDI_NI_TIO
1171         select COMEDI_8255
1172         ---help---
1173           Enable support for the National Instruments PCMCIA DAQCard E series
1174           DAQCard-ai-16xe-50, DAQCard-ai-16e-4, DAQCard-6062E, DAQCard-6024E
1175           and DAQCard-6036E
1176 
1177           To compile this driver as a module, choose M here: the module will be
1178           called ni_mio_cs.
1179 
1180 config COMEDI_QUATECH_DAQP_CS
1181         tristate "Quatech DAQP PCMCIA data capture card support"
1182         ---help---
1183           Enable support for the Quatech DAQP PCMCIA data capture cards
1184           DAQP-208 and DAQP-308
1185 
1186           To compile this driver as a module, choose M here: the module will be
1187           called quatech_daqp_cs.
1188 
1189 endif # COMEDI_PCMCIA_DRIVERS
1190 
1191 menuconfig COMEDI_USB_DRIVERS
1192         tristate "Comedi USB drivers"
1193         depends on USB
1194         ---help---
1195           Enable support for comedi USB drivers.
1196 
1197           To compile this support as a module, choose M here: the module will
1198           be called comedi_usb.
1199 
1200 if COMEDI_USB_DRIVERS
1201 
1202 config COMEDI_DT9812
1203         tristate "DataTranslation DT9812 USB module support"
1204         ---help---
1205           Enable support for the Data Translation DT9812 USB module
1206 
1207           To compile this driver as a module, choose M here: the module will be
1208           called dt9812.
1209 
1210 config COMEDI_NI_USB6501
1211         tristate "NI USB-6501 support"
1212         ---help---
1213           Enable support for the National Instruments USB-6501 module.
1214 
1215           The NI USB-6501 is a Full-Speed USB 2.0 (12 Mbit/s) device that
1216           provides 24 digital I/O lines channels and one 32-bit counter.
1217 
1218           To compile this driver as a module, choose M here: the module will be
1219           called ni_usb6501.
1220 
1221 config COMEDI_USBDUX
1222         tristate "ITL USB-DUX-D support"
1223         ---help---
1224           Enable support for the Incite Technology Ltd USB-DUX-D Board
1225 
1226           To compile this driver as a module, choose M here: the module will be
1227           called usbdux.
1228 
1229 config COMEDI_USBDUXFAST
1230         tristate "ITL USB-DUXfast support"
1231         ---help---
1232           Enable support for the Incite Technology Ltd USB-DUXfast Board
1233 
1234           To compile this driver as a module, choose M here: the module will be
1235           called usbduxfast.
1236 
1237 config COMEDI_USBDUXSIGMA
1238         tristate "ITL USB-DUXsigma support"
1239         ---help---
1240           Enable support for the Incite Technology Ltd USB-DUXsigma Board
1241 
1242           To compile this driver as a module, choose M here: the module will be
1243           called usbduxsigma.
1244 
1245 config COMEDI_VMK80XX
1246         tristate "Velleman VM110/VM140 USB Board support"
1247         ---help---
1248           Build the Velleman USB Board Low-Level Driver supporting the
1249           K8055/K8061 aka VM110/VM140 devices
1250 
1251           To compile this driver as a module, choose M here: the module will be
1252           called vmk80xx.
1253 
1254 endif # COMEDI_USB_DRIVERS
1255 
1256 config COMEDI_8254
1257         tristate
1258 
1259 config COMEDI_8255
1260         tristate
1261 
1262 config COMEDI_8255_SA
1263         tristate "Standalone 8255 support"
1264         select COMEDI_8255
1265         ---help---
1266           Enable support for 8255 digital I/O as a standalone driver.
1267 
1268           You should enable compilation this driver if you plan to use a board
1269           that has an 8255 chip at a known I/O base address and there are no
1270           other Comedi drivers for the board.
1271 
1272           Note that Comedi drivers for most multi-function boards incorporating
1273           an 8255 chip use the 'comedi_8255' module.  Most PCI-based 8255
1274           boards use the 8255_pci driver as a wrapper around the 'comedi_8255'
1275           module.
1276 
1277           To compile this driver as a module, choose M here: the module will be
1278           called 8255.
1279 
1280 config COMEDI_KCOMEDILIB
1281         tristate "Comedi kcomedilib"
1282         ---help---
1283           Build the kcomedilib.
1284 
1285           This is a kernel module used to open and manipulate Comedi devices
1286           from within kernel code.  It is currently only used by the
1287           comedi_bond driver, and its functionality has been stripped down to
1288           the needs of that driver, so is currently not very useful for
1289           anything else.
1290 
1291           To compile kcomedilib as a module, choose M here: the module will be
1292           called kcomedilib.
1293 
1294 config COMEDI_AMPLC_DIO200
1295         select COMEDI_8254
1296         tristate
1297 
1298 config COMEDI_AMPLC_PC236
1299         tristate
1300         select COMEDI_8255
1301 
1302 config COMEDI_DAS08
1303         tristate
1304         select COMEDI_8254
1305         select COMEDI_8255
1306 
1307 config COMEDI_ISADMA
1308         tristate
1309 
1310 config COMEDI_NI_LABPC
1311         tristate
1312         select COMEDI_8254
1313         select COMEDI_8255
1314 
1315 config COMEDI_NI_LABPC_ISADMA
1316         tristate
1317         select COMEDI_ISADMA
1318 
1319 config COMEDI_NI_TIO
1320         tristate
1321 
1322 endif # COMEDI

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us