Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14


  1 #
  2 # X86 Platform Specific Drivers
  3 #
  5 menuconfig X86_PLATFORM_DEVICES
  6         bool "X86 Platform Specific Device Drivers"
  7         default y
  8         depends on X86
  9         ---help---
 10           Say Y here to get to see options for device drivers for various
 11           x86 platforms, including vendor-specific laptop extension drivers.
 12           This option alone does not add any kernel code.
 14           If you say N, all options in this submenu will be skipped and disabled.
 18 config ACER_WMI
 19         tristate "Acer WMI Laptop Extras"
 20         depends on ACPI
 21         select LEDS_CLASS
 22         select NEW_LEDS
 23         depends on BACKLIGHT_CLASS_DEVICE
 24         depends on SERIO_I8042
 25         depends on INPUT
 26         depends on RFKILL || RFKILL = n
 27         depends on ACPI_WMI
 28         select INPUT_SPARSEKMAP
 29         # Acer WMI depends on ACPI_VIDEO when ACPI is enabled
 30         # but for select to work, need to select ACPI_VIDEO's dependencies, ick
 31         select VIDEO_OUTPUT_CONTROL if ACPI
 32         select ACPI_VIDEO if ACPI
 33         ---help---
 34           This is a driver for newer Acer (and Wistron) laptops. It adds
 35           wireless radio and bluetooth control, and on some laptops,
 36           exposes the mail LED and LCD backlight.
 38           If you have an ACPI-WMI compatible Acer/ Wistron laptop, say Y or M
 39           here.
 41 config ACERHDF
 42         tristate "Acer Aspire One temperature and fan driver"
 43         depends on THERMAL && ACPI
 44         ---help---
 45           This is a driver for Acer Aspire One netbooks. It allows to access
 46           the temperature sensor and to control the fan.
 48           After loading this driver the BIOS is still in control of the fan.
 49           To let the kernel handle the fan, do:
 50           echo -n enabled > /sys/class/thermal/thermal_zone0/mode
 52           For more information about this driver see
 53           <>
 55           If you have an Acer Aspire One netbook, say Y or M
 56           here.
 58 config ASUS_LAPTOP
 59         tristate "Asus Laptop Extras"
 60         depends on ACPI
 61         select LEDS_CLASS
 62         select NEW_LEDS
 63         select BACKLIGHT_CLASS_DEVICE
 64         depends on INPUT
 65         depends on RFKILL || RFKILL = n
 66         select INPUT_SPARSEKMAP
 67         select INPUT_POLLDEV
 68         ---help---
 69           This is a driver for Asus laptops, Lenovo SL and the Pegatron
 70           Lucid tablet. It may also support some MEDION, JVC or VICTOR
 71           laptops. It makes all the extra buttons generate standard
 72           ACPI events and input events, and on the Lucid the built-in
 73           accelerometer appears as an input device.  It also adds
 74           support for video output switching, LCD backlight control,
 75           Bluetooth and Wlan control, and most importantly, allows you
 76           to blink those fancy LEDs.
 78           For more information see <>.
 80           If you have an ACPI-compatible ASUS laptop, say Y or M here.
 82 config DELL_LAPTOP
 83         tristate "Dell Laptop Extras"
 84         depends on X86
 85         depends on DCDBAS
 86         depends on BACKLIGHT_CLASS_DEVICE
 87         depends on RFKILL || RFKILL = n
 88         depends on SERIO_I8042
 89         select POWER_SUPPLY
 90         select LEDS_CLASS
 91         select NEW_LEDS
 92         default n
 93         ---help---
 94         This driver adds support for rfkill and backlight control to Dell
 95         laptops.
 97 config DELL_WMI
 98         tristate "Dell WMI extras"
 99         depends on ACPI_WMI
100         depends on INPUT
101         select INPUT_SPARSEKMAP
102         ---help---
103           Say Y here if you want to support WMI-based hotkeys on Dell laptops.
105           To compile this driver as a module, choose M here: the module will
106           be called dell-wmi.
108 config DELL_WMI_AIO
109         tristate "WMI Hotkeys for Dell All-In-One series"
110         depends on ACPI_WMI
111         depends on INPUT
112         select INPUT_SPARSEKMAP
113         ---help---
114           Say Y here if you want to support WMI-based hotkeys on Dell
115           All-In-One machines.
117           To compile this driver as a module, choose M here: the module will
118           be called dell-wmi-aio.
122         tristate "Fujitsu Laptop Extras"
123         depends on ACPI
124         depends on INPUT
125         depends on BACKLIGHT_CLASS_DEVICE
126         depends on LEDS_CLASS || LEDS_CLASS=n
127         ---help---
128           This is a driver for laptops built by Fujitsu:
130             * P2xxx/P5xxx/S6xxx/S7xxx series Lifebooks
131             * Possibly other Fujitsu laptop models
132             * Tested with S6410 and S7020
134           It adds support for LCD brightness control and some hotkeys.
136           If you have a Fujitsu laptop, say Y or M here.
139         bool "Verbose debug mode for Fujitsu Laptop Extras"
140         depends on FUJITSU_LAPTOP
141         default n
142         ---help---
143           Enables extra debug output from the fujitsu extras driver, at the
144           expense of a slight increase in driver size.
146           If you are not sure, say N here.
149        tristate "Fujitsu Tablet Extras"
150        depends on ACPI
151        depends on INPUT
152        ---help---
153          This is a driver for tablets built by Fujitsu:
155            * Lifebook P1510/P1610/P1620/Txxxx
156            * Stylistic ST5xxx
157            * Possibly other Fujitsu tablet models
159          It adds support for the panel buttons, docking station detection,
160          tablet/notebook mode detection for convertible and
161          orientation detection for docked slates.
163          If you have a Fujitsu convertible or slate, say Y or M here.
165 config AMILO_RFKILL
166         tristate "Fujitsu-Siemens Amilo rfkill support"
167         depends on RFKILL
168         depends on SERIO_I8042
169         ---help---
170           This is a driver for enabling wifi on some Fujitsu-Siemens Amilo
171           laptops.
173 config TC1100_WMI
174         tristate "HP Compaq TC1100 Tablet WMI Extras"
175         depends on !X86_64
176         depends on ACPI
177         depends on ACPI_WMI
178         ---help---
179           This is a driver for the WMI extensions (wireless and bluetooth power
180           control) of the HP Compaq TC1100 tablet.
182 config HP_ACCEL
183         tristate "HP laptop accelerometer"
184         depends on INPUT && ACPI
185         select SENSORS_LIS3LV02D
186         select NEW_LEDS
187         select LEDS_CLASS
188         help
189           This driver provides support for the "Mobile Data Protection System 3D"
190           or "3D DriveGuard" feature of HP laptops. On such systems the driver
191           should load automatically (via ACPI alias).
193           Support for a led indicating disk protection will be provided as
194           hp::hddprotect. For more information on the feature, refer to
195           Documentation/misc-devices/lis3lv02d.
197           To compile this driver as a module, choose M here: the module will
198           be called hp_accel.
200 config HP_WIRELESS
201         tristate "HP WIRELESS"
202         depends on ACPI
203         depends on INPUT
204         help
205          This driver provides supports for new HP wireless button for Windows 8.
206          On such systems the driver should load automatically (via ACPI alias).
208          To compile this driver as a module, choose M here: the module will
209          be called hp-wireless.
211 config HP_WMI
212         tristate "HP WMI extras"
213         depends on ACPI_WMI
214         depends on INPUT
215         depends on RFKILL || RFKILL = n
216         select INPUT_SPARSEKMAP
217         help
218          Say Y here if you want to support WMI-based hotkeys on HP laptops and
219          to read data from WMI such as docking or ambient light sensor state.
221          To compile this driver as a module, choose M here: the module will
222          be called hp-wmi.
224 config MSI_LAPTOP
225         tristate "MSI Laptop Extras"
226         depends on ACPI
227         depends on BACKLIGHT_CLASS_DEVICE
228         depends on RFKILL
229         depends on INPUT && SERIO_I8042
230         select INPUT_SPARSEKMAP
231         ---help---
232           This is a driver for laptops built by MSI (MICRO-STAR
233           INTERNATIONAL):
235           MSI MegaBook S270 (MS-1013)
236           Cytron/TCM/Medion/Tchibo MD96100/SAM2000
238           It adds support for Bluetooth, WLAN and LCD brightness control.
240           More information about this driver is available at
241           <>.
243           If you have an MSI S270 laptop, say Y or M here.
246         tristate "Panasonic Laptop Extras"
247         depends on INPUT && ACPI
248         depends on BACKLIGHT_CLASS_DEVICE
249         select INPUT_SPARSEKMAP
250         ---help---
251           This driver adds support for access to backlight control and hotkeys
252           on Panasonic Let's Note laptops.
254           If you have a Panasonic Let's note laptop (such as the R1(N variant),
255           R2, R3, R5, T2, W2 and Y2 series), say Y.
257 config COMPAL_LAPTOP
258         tristate "Compal Laptop Extras"
259         depends on ACPI
260         depends on BACKLIGHT_CLASS_DEVICE
261         depends on RFKILL
262         depends on HWMON
263         depends on POWER_SUPPLY
264         ---help---
265           This is a driver for laptops built by Compal:
267           Compal FL90/IFL90
268           Compal FL91/IFL91
269           Compal FL92/JFL92
270           Compal FT00/IFT00
272           It adds support for Bluetooth, WLAN and LCD brightness control.
274           If you have an Compal FL9x/IFL9x/FT00 laptop, say Y or M here.
276 config SONY_LAPTOP
277         tristate "Sony Laptop Extras"
278         depends on ACPI
279         select BACKLIGHT_CLASS_DEVICE
280         depends on INPUT
281         depends on RFKILL
282           ---help---
283           This mini-driver drives the SNC and SPIC devices present in the ACPI
284           BIOS of the Sony Vaio laptops.
286           It gives access to some extra laptop functionalities like Bluetooth,
287           screen brightness control, Fn keys and allows powering on/off some
288           devices.
290           Read <file:Documentation/laptops/sony-laptop.txt> for more information.
292 config SONYPI_COMPAT
293         bool "Sonypi compatibility"
294         depends on SONY_LAPTOP
295           ---help---
296           Build the sonypi driver compatibility code into the sony-laptop driver.
299         tristate "Lenovo IdeaPad Laptop Extras"
300         depends on ACPI
301         depends on RFKILL && INPUT
302         depends on SERIO_I8042
303         depends on BACKLIGHT_CLASS_DEVICE
304         select INPUT_SPARSEKMAP
305         help
306           This is a driver for Lenovo IdeaPad netbooks contains drivers for
307           rfkill switch, hotkey, fan control and backlight control.
309 config THINKPAD_ACPI
310         tristate "ThinkPad ACPI Laptop Extras"
311         depends on ACPI
312         depends on INPUT
313         depends on RFKILL || RFKILL = n
314         select BACKLIGHT_LCD_SUPPORT
315         select BACKLIGHT_CLASS_DEVICE
316         select HWMON
317         select NVRAM
318         select NEW_LEDS
319         select LEDS_CLASS
320         ---help---
321           This is a driver for the IBM and Lenovo ThinkPad laptops. It adds
322           support for Fn-Fx key combinations, Bluetooth control, video
323           output switching, ThinkLight control, UltraBay eject and more.
324           For more information about this driver see
325           <file:Documentation/laptops/thinkpad-acpi.txt> and
326           <> .
328           This driver was formerly known as ibm-acpi.
330           Extra functionality will be available if the rfkill (CONFIG_RFKILL)
331           and/or ALSA (CONFIG_SND) subsystems are available in the kernel.
332           Note that if you want ThinkPad-ACPI to be built-in instead of
333           modular, ALSA and rfkill will also have to be built-in.
335           If you have an IBM or Lenovo ThinkPad laptop, say Y or M here.
338         bool "Console audio control ALSA interface"
339         depends on THINKPAD_ACPI
340         depends on SND
341         depends on SND = y || THINKPAD_ACPI = SND
342         default y
343         ---help---
344           Enables monitoring of the built-in console audio output control
345           (headphone and speakers), which is operated by the mute and (in
346           some ThinkPad models) volume hotkeys.
348           If this option is enabled, ThinkPad-ACPI will export an ALSA card
349           with a single read-only mixer control, which should be used for
350           on-screen-display feedback purposes by the Desktop Environment.
352           Optionally, the driver will also allow software control (the
353           ALSA mixer will be made read-write).  Please refer to the driver
354           documentation for details.
356           All IBM models have both volume and mute control.  Newer Lenovo
357           models only have mute control (the volume hotkeys are just normal
358           keys and volume control is done through the main HDA mixer).
361         bool "Maintainer debug facilities"
362         depends on THINKPAD_ACPI
363         default n
364         ---help---
365           Enables extra stuff in the thinkpad-acpi which is completely useless
366           for normal use.  Read the driver source to find out what it does.
368           Say N here, unless you were told by a kernel maintainer to do
369           otherwise.
372         bool "Verbose debug mode"
373         depends on THINKPAD_ACPI
374         default n
375         ---help---
376           Enables extra debugging information, at the expense of a slightly
377           increase in driver size.
379           If you are not sure, say N here.
382         bool "Allow control of important LEDs (unsafe)"
383         depends on THINKPAD_ACPI
384         default n
385         ---help---
386           Overriding LED state on ThinkPads can mask important
387           firmware alerts (like critical battery condition), or misled
388           the user into damaging the hardware (undocking or ejecting
389           the bay while buses are still active), etc.
391           LED control on the ThinkPad is write-only (with very few
392           exceptions on very ancient models), which makes it
393           impossible to know beforehand if important information will
394           be lost when one changes LED state.
396           Users that know what they are doing can enable this option
397           and the driver will allow control of every LED, including
398           the ones on the dock stations.
400           Never enable this option on a distribution kernel.
402           Say N here, unless you are building a kernel for your own
403           use, and need to control the important firmware LEDs.
406         bool "Video output control support"
407         depends on THINKPAD_ACPI
408         default y
409         ---help---
410           Allows the thinkpad_acpi driver to provide an interface to control
411           the various video output ports.
413           This feature often won't work well, depending on ThinkPad model,
414           display state, video output devices in use, whether there is a X
415           server running, phase of the moon, and the current mood of
416           Schroedinger's cat.  If you can use's RandR to control
417           your ThinkPad's video output ports instead of this feature,
418           don't think twice: do it and say N here to save memory and avoid
419           bad interactions with
421           NOTE: access to this feature is limited to processes with the
422           CAP_SYS_ADMIN capability, to avoid local DoS issues in platforms
423           where it interacts badly with
425           If you are not sure, say Y here but do try to check if you could
426           be using RandR instead.
429         bool "Support NVRAM polling for hot keys"
430         depends on THINKPAD_ACPI
431         default y
432         ---help---
433           Some thinkpad models benefit from NVRAM polling to detect a few of
434           the hot key press events.  If you know your ThinkPad model does not
435           need to do NVRAM polling to support any of the hot keys you use,
436           unselecting this option will save about 1kB of memory.
438           ThinkPads T40 and newer, R52 and newer, and X31 and newer are
439           unlikely to need NVRAM polling in their latest BIOS versions.
441           NVRAM polling can detect at most the following keys: ThinkPad/Access
442           IBM, Zoom, Switch Display (fn+F7), ThinkLight, Volume up/down/mute,
443           Brightness up/down, Display Expand (fn+F8), Hibernate (fn+F12).
445           If you are not sure, say Y here.  The driver enables polling only if
446           it is strictly necessary to do so.
448 config SENSORS_HDAPS
449         tristate "Thinkpad Hard Drive Active Protection System (hdaps)"
450         depends on INPUT && X86
451         select INPUT_POLLDEV
452         default n
453         help
454           This driver provides support for the IBM Hard Drive Active Protection
455           System (hdaps), which provides an accelerometer and other misc. data.
456           ThinkPads starting with the R50, T41, and X40 are supported.  The
457           accelerometer data is readable via sysfs.
459           This driver also provides an absolute input class device, allowing
460           the laptop to act as a pinball machine-esque joystick.
462           If your ThinkPad is not recognized by the driver, please update to latest
463           BIOS. This is especially the case for some R52 ThinkPads.
465           Say Y here if you have an applicable laptop and want to experience
466           the awesome power of hdaps.
468 config INTEL_MENLOW
469         tristate "Thermal Management driver for Intel menlow platform"
470         depends on ACPI_THERMAL
471         select THERMAL
472         ---help---
473           ACPI thermal management enhancement driver on
474           Intel Menlow platform.
476           If unsure, say N.
478 config EEEPC_LAPTOP
479         tristate "Eee PC Hotkey Driver"
480         depends on ACPI
481         depends on INPUT
482         depends on RFKILL || RFKILL = n
483         depends on HOTPLUG_PCI
484         select BACKLIGHT_CLASS_DEVICE
485         select HWMON
486         select LEDS_CLASS
487         select NEW_LEDS
488         select INPUT_SPARSEKMAP
489         ---help---
490           This driver supports the Fn-Fx keys on Eee PC laptops.
492           It  also gives access to some extra laptop functionalities like
493           Bluetooth, backlight and allows powering on/off some other
494           devices.
496           If you have an Eee PC laptop, say Y or M here. If this driver
497           doesn't work on your Eee PC, try eeepc-wmi instead.
499 config ASUS_WMI
500         tristate "ASUS WMI Driver"
501         depends on ACPI_WMI
502         depends on INPUT
503         depends on HWMON
504         depends on BACKLIGHT_CLASS_DEVICE
505         depends on RFKILL || RFKILL = n
506         depends on HOTPLUG_PCI
507         depends on ACPI_VIDEO || ACPI_VIDEO = n
508         select INPUT_SPARSEKMAP
509         select LEDS_CLASS
510         select NEW_LEDS
511         ---help---
512           Say Y here if you have a WMI aware Asus laptop (like Eee PCs or new
513           Asus Notebooks).
515           To compile this driver as a module, choose M here: the module will
516           be called asus-wmi.
518 config ASUS_NB_WMI
519         tristate "Asus Notebook WMI Driver"
520         depends on ASUS_WMI
521         ---help---
522           This is a driver for newer Asus notebooks. It adds extra features
523           like wireless radio and bluetooth control, leds, hotkeys, backlight...
525           For more informations, see
526           <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
528           If you have an ACPI-WMI compatible Asus Notebook, say Y or M
529           here.
531 config EEEPC_WMI
532         tristate "Eee PC WMI Driver"
533         depends on ASUS_WMI
534         ---help---
535           This is a driver for newer Eee PC laptops. It adds extra features
536           like wireless radio and bluetooth control, leds, hotkeys, backlight...
538           For more informations, see
539           <file:Documentation/ABI/testing/sysfs-platform-asus-wmi>
541           If you have an ACPI-WMI compatible Eee PC laptop (>= 1000), say Y or M
542           here.
544 config ACPI_WMI
545         tristate "WMI"
546         depends on ACPI
547         help
548           This driver adds support for the ACPI-WMI (Windows Management
549           Instrumentation) mapper device (PNP0C14) found on some systems.
551           ACPI-WMI is a proprietary extension to ACPI to expose parts of the
552           ACPI firmware to userspace - this is done through various vendor
553           defined methods and data blocks in a PNP0C14 device, which are then
554           made available for userspace to call.
556           The implementation of this in Linux currently only exposes this to
557           other kernel space drivers.
559           This driver is a required dependency to build the firmware specific
560           drivers needed on many machines, including Acer and HP laptops.
562           It is safe to enable this driver even if your DSDT doesn't define
563           any ACPI-WMI devices.
565 config MSI_WMI
566         tristate "MSI WMI extras"
567         depends on ACPI_WMI
568         depends on INPUT
569         depends on BACKLIGHT_CLASS_DEVICE
570         select INPUT_SPARSEKMAP
571         help
572          Say Y here if you want to support WMI-based hotkeys on MSI laptops.
574          To compile this driver as a module, choose M here: the module will
575          be called msi-wmi.
578         tristate "Topstar Laptop Extras"
579         depends on ACPI
580         depends on INPUT
581         select INPUT_SPARSEKMAP
582         ---help---
583           This driver adds support for hotkeys found on Topstar laptops.
585           If you have a Topstar laptop, say Y or M here.
587 config ACPI_TOSHIBA
588         tristate "Toshiba Laptop Extras"
589         depends on ACPI
590         depends on ACPI_WMI
591         select LEDS_CLASS
592         select NEW_LEDS
593         depends on BACKLIGHT_CLASS_DEVICE
594         depends on INPUT
595         depends on RFKILL || RFKILL = n
596         depends on SERIO_I8042 || SERIO_I8042 = n
597         select INPUT_POLLDEV
598         select INPUT_SPARSEKMAP
599         ---help---
600           This driver adds support for access to certain system settings
601           on "legacy free" Toshiba laptops.  These laptops can be recognized by
602           their lack of a BIOS setup menu and APM support.
604           On these machines, all system configuration is handled through the
605           ACPI.  This driver is required for access to controls not covered
606           by the general ACPI drivers, such as LCD brightness, video output,
607           etc.
609           This driver differs from the non-ACPI Toshiba laptop driver (located
610           under "Processor type and features") in several aspects.
611           Configuration is accessed by reading and writing text files in the
612           /proc tree instead of by program interface to /dev.  Furthermore, no
613           power management functions are exposed, as those are handled by the
614           general ACPI drivers.
616           More information about this driver is available at
617           <>.
619           If you have a legacy free Toshiba laptop (such as the Libretto L1
620           series), say Y.
623         tristate "Toshiba Bluetooth RFKill switch support"
624         depends on ACPI
625         ---help---
626           This driver adds support for Bluetooth events for the RFKill
627           switch on modern Toshiba laptops with full ACPI support and
628           an RFKill switch.
630           This driver handles RFKill events for the TOS6205 Bluetooth,
631           and re-enables it when the switch is set back to the 'on'
632           position.
634           If you have a modern Toshiba laptop with a Bluetooth and an
635           RFKill switch (such as the Portege R500), say Y.
637 config ACPI_CMPC
638         tristate "CMPC Laptop Extras"
639         depends on X86 && ACPI
640         depends on RFKILL || RFKILL=n
641         select INPUT
642         select BACKLIGHT_CLASS_DEVICE
643         default n
644         help
645           Support for Intel Classmate PC ACPI devices, including some
646           keys as input device, backlight device, tablet and accelerometer
647           devices.
649 config INTEL_SCU_IPC
650         bool "Intel SCU IPC Support"
651         depends on X86_INTEL_MID
652         default y
653         ---help---
654           IPC is used to bridge the communications between kernel and SCU on
655           some embedded Intel x86 platforms. This is not needed for PC-type
656           machines.
659         tristate "Intel SCU IPC utility driver"
660         depends on INTEL_SCU_IPC
661         default y
662         ---help---
663           The IPC Util driver provides an interface with the SCU enabling
664           low level access for debug work and updating the firmware. Say
665           N unless you will be doing this on an Intel MID platform.
667 config GPIO_INTEL_PMIC
668         bool "Intel PMIC GPIO support"
669         depends on INTEL_SCU_IPC && GPIOLIB
670         ---help---
671           Say Y here to support GPIO via the SCU IPC interface
672           on Intel MID platforms.
675         tristate "power button driver for Intel MID platforms"
676         depends on INTEL_SCU_IPC && INPUT
677         help
678           This driver handles the power button on the Intel MID platforms.
680           If unsure, say N.
683        tristate "Thermal driver for Intel Medfield platform"
684        depends on MFD_INTEL_MSIC && THERMAL
685        help
686          Say Y here to enable thermal driver support for the  Intel Medfield
687          platform.
689 config INTEL_IPS
690         tristate "Intel Intelligent Power Sharing"
691         depends on ACPI
692         ---help---
693           Intel Calpella platforms support dynamic power sharing between the
694           CPU and GPU, maximizing performance in a given TDP.  This driver,
695           along with the CPU frequency and i915 drivers, provides that
696           functionality.  If in doubt, say Y here; it will only load on
697           supported platforms.
699 config IBM_RTL
700         tristate "Device driver to enable PRTL support"
701         depends on X86 && PCI
702         ---help---
703          Enable support for IBM Premium Real Time Mode (PRTM).
704          This module will allow you the enter and exit PRTM in the BIOS via
705          sysfs on platforms that support this feature.  System in PRTM will
706          not receive CPU-generated SMIs for recoverable errors.  Use of this
707          feature without proper support may void your hardware warranty.
709          If the proper BIOS support is found the driver will load and create
710          /sys/devices/system/ibm_rtl/.  The "state" variable will indicate
711          whether or not the BIOS is in PRTM.
712          state = 0 (BIOS SMIs on)
713          state = 1 (BIOS SMIs off)
715 config XO1_RFKILL
716         tristate "OLPC XO-1 software RF kill switch"
717         depends on OLPC
718         depends on RFKILL
719         ---help---
720           Support for enabling/disabling the WLAN interface on the OLPC XO-1
721           laptop.
723 config XO15_EBOOK
724         tristate "OLPC XO-1.5 ebook switch"
725         depends on ACPI && INPUT
726         ---help---
727           Support for the ebook switch on the OLPC XO-1.5 laptop.
729           This switch is triggered as the screen is rotated and folded down to
730           convert the device into ebook form.
733         tristate "Samsung Laptop driver"
734         depends on X86
735         depends on RFKILL || RFKILL = n
736         depends on ACPI_VIDEO || ACPI_VIDEO = n
737         depends on BACKLIGHT_CLASS_DEVICE
738         select LEDS_CLASS
739         select NEW_LEDS
740         ---help---
741           This module implements a driver for a wide range of different
742           Samsung laptops.  It offers control over the different
743           function keys, wireless LED, LCD backlight level.
745           It may also provide some sysfs files described in
746           <file:Documentation/ABI/testing/sysfs-platform-samsung-laptop>
748           To compile this driver as a module, choose M here: the module
749           will be called samsung-laptop.
751 config MXM_WMI
752        tristate "WMI support for MXM Laptop Graphics"
753        depends on ACPI_WMI
754        ---help---
755           MXM is a standard for laptop graphics cards, the WMI interface
756           is required for switchable nvidia graphics machines
759         tristate "Intel Oaktrail Platform Extras"
760         depends on ACPI
761         depends on RFKILL && BACKLIGHT_CLASS_DEVICE && ACPI
762         ---help---
763           Intel Oaktrail platform need this driver to provide interfaces to
764           enable/disable the Camera, WiFi, BT etc. devices. If in doubt, say Y
765           here; it will only load on supported platforms.
767 config SAMSUNG_Q10
768         tristate "Samsung Q10 Extras"
769         depends on ACPI
770         select BACKLIGHT_CLASS_DEVICE
771         ---help---
772           This driver provides support for backlight control on Samsung Q10
773           and related laptops, including Dell Latitude X200.
775 config APPLE_GMUX
776         tristate "Apple Gmux Driver"
777         depends on ACPI
778         depends on PNP
779         depends on BACKLIGHT_CLASS_DEVICE
780         depends on BACKLIGHT_APPLE=n || BACKLIGHT_APPLE
781         depends on ACPI_VIDEO=n || ACPI_VIDEO
782         ---help---
783           This driver provides support for the gmux device found on many
784           Apple laptops, which controls the display mux for the hybrid
785           graphics as well as the backlight. Currently only backlight
786           control is supported by the driver.
788 config INTEL_RST
789         tristate "Intel Rapid Start Technology Driver"
790         depends on ACPI
791         ---help---
792           This driver provides support for modifying paramaters on systems
793           equipped with Intel's Rapid Start Technology. When put in an ACPI
794           sleep state, these devices will wake after either a configured
795           timeout or when the system battery reaches a critical state,
796           automatically copying memory contents to disk. On resume, the
797           firmware will copy the memory contents back to RAM and resume the OS
798           as usual.
801         tristate "Intel Smart Connect disabling driver"
802         depends on ACPI
803         ---help---
804           Intel Smart Connect is a technology intended to permit devices to
805           update state by resuming for a short period of time at regular
806           intervals. If a user enables this functionality under Windows and
807           then reboots into Linux, the system may remain configured to resume
808           on suspend. In the absence of any userspace to support it, the system
809           will then remain awake until something triggers another suspend.
811           This driver checks to determine whether the device has Intel Smart
812           Connect enabled, and if so disables it.
814 config PVPANIC
815         tristate "pvpanic device support"
816         depends on ACPI
817         ---help---
818           This driver provides support for the pvpanic device.  pvpanic is
819           a paravirtualized device provided by QEMU; it lets a virtual machine
820           (guest) communicate panic events to the host.
823         tristate
824         depends on PCI
825         ---help---
826           Needed on Baytrail platforms for access to the IOSF Sideband Mailbox
827           Interface. This is a requirement for systems that need to configure
828           the PUNIT for power management features such as RAPL.
830 endif # X86_PLATFORM_DEVICES

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us