Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/net/wireless/p54/Kconfig

  1 config P54_COMMON
  2         tristate "Softmac Prism54 support"
  3         depends on MAC80211
  4         select FW_LOADER
  5         select CRC_CCITT
  6         ---help---
  7           This is common code for isl38xx/stlc45xx based modules.
  8           This module does nothing by itself - the USB/PCI/SPI front-ends
  9           also need to be enabled in order to support any devices.
 10 
 11           These devices require softmac firmware which can be found at
 12           <http://wireless.kernel.org/en/users/Drivers/p54>
 13 
 14           If you choose to build a module, it'll be called p54common.
 15 
 16 config P54_USB
 17         tristate "Prism54 USB support"
 18         depends on P54_COMMON && USB
 19         select CRC32
 20         ---help---
 21           This driver is for USB isl38xx based wireless cards.
 22 
 23           These devices require softmac firmware which can be found at
 24           <http://wireless.kernel.org/en/users/Drivers/p54>
 25 
 26           If you choose to build a module, it'll be called p54usb.
 27 
 28 config P54_PCI
 29         tristate "Prism54 PCI support"
 30         depends on P54_COMMON && PCI
 31         ---help---
 32           This driver is for PCI isl38xx based wireless cards.
 33           This driver supports most devices that are supported by the
 34           fullmac prism54 driver plus many devices which are not
 35           supported by the fullmac driver/firmware.
 36 
 37           This driver requires softmac firmware which can be found at
 38           <http://wireless.kernel.org/en/users/Drivers/p54>
 39 
 40           If you choose to build a module, it'll be called p54pci.
 41 
 42 config P54_SPI
 43         tristate "Prism54 SPI (stlc45xx) support"
 44         depends on P54_COMMON && SPI_MASTER
 45         ---help---
 46           This driver is for stlc4550 or stlc4560 based wireless chips
 47           such as Nokia's N800/N810 Portable Internet Tablet.
 48 
 49           If you choose to build a module, it'll be called p54spi.
 50 
 51 config P54_SPI_DEFAULT_EEPROM
 52         bool "Include fallback EEPROM blob"
 53         depends on P54_SPI
 54         default n
 55         ---help---
 56          Unlike the PCI or USB devices, the SPI variants don't have
 57          a dedicated EEPROM chip to store all device specific values
 58          for calibration, country and interface settings.
 59 
 60          The driver will try to load the image "3826.eeprom", if the
 61          file is put at the right place. (usually /lib/firmware.)
 62 
 63          Only if this request fails, this option will provide a
 64          backup set of generic values to get the device working.
 65 
 66          Enabling this option adds about 4k to p54spi.
 67 
 68 config P54_LEDS
 69         bool
 70         depends on P54_COMMON && MAC80211_LEDS && (LEDS_CLASS = y || LEDS_CLASS = P54_COMMON)
 71         default y

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us