Version:  2.0.40 2.2.26 2.4.37 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

Linux/drivers/net/wireless/brcm80211/Kconfig

  1 config BRCMUTIL
  2         tristate
  3 
  4 config BRCMSMAC
  5         tristate "Broadcom IEEE802.11n PCIe SoftMAC WLAN driver"
  6         depends on MAC80211
  7         depends on BCMA_POSSIBLE
  8         select BCMA
  9         select NEW_LEDS if BCMA_DRIVER_GPIO
 10         select LEDS_CLASS if BCMA_DRIVER_GPIO
 11         select BRCMUTIL
 12         select FW_LOADER
 13         select CORDIC
 14         ---help---
 15           This module adds support for PCIe wireless adapters based on Broadcom
 16           IEEE802.11n SoftMAC chipsets. It also has WLAN led support, which will
 17           be available if you select BCMA_DRIVER_GPIO. If you choose to build a
 18           module, the driver will be called brcmsmac.ko.
 19 
 20 config BRCMFMAC
 21         tristate "Broadcom IEEE802.11n embedded FullMAC WLAN driver"
 22         depends on CFG80211
 23         select BRCMUTIL
 24         ---help---
 25           This module adds support for embedded wireless adapters based on
 26           Broadcom IEEE802.11n FullMAC chipsets. It has to work with at least
 27           one of the bus interface support. If you choose to build a module,
 28           it'll be called brcmfmac.ko.
 29 
 30 config BRCMFMAC_SDIO
 31         bool "SDIO bus interface support for FullMAC driver"
 32         depends on (MMC = y || MMC = BRCMFMAC)
 33         depends on BRCMFMAC
 34         select FW_LOADER
 35         default y
 36         ---help---
 37           This option enables the SDIO bus interface support for Broadcom
 38           IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
 39           use the driver for a SDIO wireless card.
 40 
 41 config BRCMFMAC_USB
 42         bool "USB bus interface support for FullMAC driver"
 43         depends on (USB = y || USB = BRCMFMAC)
 44         depends on BRCMFMAC
 45         select FW_LOADER
 46         ---help---
 47           This option enables the USB bus interface support for Broadcom
 48           IEEE802.11n embedded FullMAC WLAN driver. Say Y if you want to
 49           use the driver for an USB wireless card.
 50 
 51 config BRCM_TRACING
 52         bool "Broadcom device tracing"
 53         depends on BRCMSMAC || BRCMFMAC
 54         ---help---
 55           If you say Y here, the Broadcom wireless drivers will register
 56           with ftrace to dump event information into the trace ringbuffer.
 57           Tracing can be enabled at runtime to aid in debugging wireless
 58           issues. This option adds a small amount of overhead when tracing
 59           is disabled. If unsure, say Y to allow developers to better help
 60           you when wireless problems occur.
 61 
 62 config BRCMDBG
 63         bool "Broadcom driver debug functions"
 64         depends on BRCMSMAC || BRCMFMAC
 65         ---help---
 66           Selecting this enables additional code for debug purposes.

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us