Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/drivers/net/wireless/ath/ath5k/Kconfig

  1 config ATH5K
  2         tristate "Atheros 5xxx wireless cards support"
  3         depends on (PCI || ATHEROS_AR231X) && MAC80211
  4         select ATH_COMMON
  5         select MAC80211_LEDS
  6         select LEDS_CLASS
  7         select NEW_LEDS
  8         select AVERAGE
  9         select ATH5K_AHB if (ATHEROS_AR231X && !PCI)
 10         select ATH5K_PCI if (!ATHEROS_AR231X && PCI)
 11         ---help---
 12           This module adds support for wireless adapters based on
 13           Atheros 5xxx chipset.
 14 
 15           Currently the following chip versions are supported:
 16 
 17           MAC: AR5211 AR5212
 18           PHY: RF5111/2111 RF5112/2112 RF5413/2413
 19 
 20           This driver uses the kernel's mac80211 subsystem.
 21 
 22           If you choose to build a module, it'll be called ath5k. Say M if
 23           unsure.
 24 
 25 config ATH5K_DEBUG
 26         bool "Atheros 5xxx debugging"
 27         depends on ATH5K
 28         ---help---
 29           Atheros 5xxx debugging messages.
 30 
 31           Say Y, if and you will get debug options for ath5k.
 32           To use this, you need to mount debugfs:
 33 
 34           mount -t debugfs debug /sys/kernel/debug
 35 
 36           You will get access to files under:
 37           /sys/kernel/debug/ath5k/phy0/
 38 
 39           To enable debug, pass the debug level to the debug module
 40           parameter. For example:
 41 
 42           modprobe ath5k debug=0x00000400
 43 
 44 config ATH5K_TRACER
 45         bool "Atheros 5xxx tracer"
 46         depends on ATH5K
 47         depends on EVENT_TRACING
 48         ---help---
 49           Say Y here to enable tracepoints for the ath5k driver
 50           using the kernel tracing infrastructure.  Select this
 51           option if you are interested in debugging the driver.
 52 
 53           If unsure, say N.
 54 
 55 config ATH5K_AHB
 56         bool "Atheros 5xxx AHB bus support"
 57         depends on (ATHEROS_AR231X && !PCI)
 58         ---help---
 59           This adds support for WiSoC type chipsets of the 5xxx Atheros
 60           family.
 61 
 62 config ATH5K_PCI
 63         bool "Atheros 5xxx PCI bus support"
 64         depends on (!ATHEROS_AR231X && PCI)
 65         ---help---
 66           This adds support for PCI type chipsets of the 5xxx Atheros
 67           family.
 68 
 69 config ATH5K_TEST_CHANNELS
 70         bool "Enables testing channels on ath5k"
 71         depends on ATH5K && CFG80211_CERTIFICATION_ONUS
 72         ---help---
 73           This enables non-standard IEEE 802.11 channels on ath5k, which
 74           can be used for research purposes. This option should be disabled
 75           unless doing research.

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us