Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/drivers/net/wireless/Kconfig

  1 #
  2 # Wireless LAN device configuration
  3 #
  4 
  5 menuconfig WLAN
  6         bool "Wireless LAN"
  7         depends on !S390
  8         depends on NET
  9         select WIRELESS
 10         default y
 11         ---help---
 12           This section contains all the pre 802.11 and 802.11 wireless
 13           device drivers. For a complete list of drivers and documentation
 14           on them refer to the wireless wiki:
 15 
 16           http://wireless.kernel.org/en/users/Drivers
 17 
 18 if WLAN
 19 
 20 config PCMCIA_RAYCS
 21         tristate "Aviator/Raytheon 2.4GHz wireless support"
 22         depends on PCMCIA
 23         select WIRELESS_EXT
 24         select WEXT_SPY
 25         select WEXT_PRIV
 26         ---help---
 27           Say Y here if you intend to attach an Aviator/Raytheon PCMCIA
 28           (PC-card) wireless Ethernet networking card to your computer.
 29           Please read the file <file:Documentation/networking/ray_cs.txt> for
 30           details.
 31 
 32           To compile this driver as a module, choose M here: the module will be
 33           called ray_cs.  If unsure, say N.
 34 
 35 config LIBERTAS_THINFIRM
 36         tristate "Marvell 8xxx Libertas WLAN driver support with thin firmware"
 37         depends on MAC80211
 38         select FW_LOADER
 39         ---help---
 40           A library for Marvell Libertas 8xxx devices using thinfirm.
 41 
 42 config LIBERTAS_THINFIRM_DEBUG
 43         bool "Enable full debugging output in the Libertas thin firmware module."
 44         depends on LIBERTAS_THINFIRM
 45         ---help---
 46           Debugging support.
 47 
 48 config LIBERTAS_THINFIRM_USB
 49         tristate "Marvell Libertas 8388 USB 802.11b/g cards with thin firmware"
 50         depends on LIBERTAS_THINFIRM && USB
 51         ---help---
 52           A driver for Marvell Libertas 8388 USB devices using thinfirm.
 53 
 54 config AIRO
 55         tristate "Cisco/Aironet 34X/35X/4500/4800 ISA and PCI cards"
 56         depends on ISA_DMA_API && (PCI || BROKEN)
 57         select WIRELESS_EXT
 58         select CRYPTO
 59         select WEXT_SPY
 60         select WEXT_PRIV
 61         ---help---
 62           This is the standard Linux driver to support Cisco/Aironet ISA and
 63           PCI 802.11 wireless cards.
 64           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
 65           - with or without encryption) as well as card before the Cisco
 66           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B).
 67 
 68           This driver support both the standard Linux Wireless Extensions
 69           and Cisco proprietary API, so both the Linux Wireless Tools and the
 70           Cisco Linux utilities can be used to configure the card.
 71 
 72           The driver can be compiled as a module and will be named "airo".
 73 
 74 config ATMEL
 75       tristate "Atmel at76c50x chipset  802.11b support"
 76       depends on (PCI || PCMCIA)
 77       select WIRELESS_EXT
 78       select WEXT_PRIV
 79       select FW_LOADER
 80       select CRC32
 81        ---help---
 82         A driver 802.11b wireless cards based on the Atmel fast-vnet
 83         chips. This driver supports standard Linux wireless extensions.
 84 
 85         Many  cards based on this chipset do not have flash memory
 86         and need their firmware loaded at start-up. If yours is
 87         one of these, you will need to provide a firmware image
 88         to be loaded into the card by the driver. The Atmel
 89         firmware package can be downloaded from
 90         <http://www.thekelleys.org.uk/atmel>
 91 
 92 config PCI_ATMEL
 93       tristate "Atmel at76c506 PCI cards"
 94       depends on ATMEL && PCI
 95        ---help---
 96         Enable support for PCI and mini-PCI cards containing the
 97         Atmel at76c506 chip.
 98 
 99 config PCMCIA_ATMEL
100         tristate "Atmel at76c502/at76c504 PCMCIA cards"
101         depends on ATMEL && PCMCIA
102         select WIRELESS_EXT
103         select FW_LOADER
104         select CRC32
105         ---help---
106           Enable support for PCMCIA cards containing the
107           Atmel at76c502 and at76c504 chips.
108 
109 config AT76C50X_USB
110         tristate "Atmel at76c503/at76c505/at76c505a USB cards"
111         depends on MAC80211 && USB
112         select FW_LOADER
113         ---help---
114           Enable support for USB Wireless devices using Atmel at76c503,
115           at76c505 or at76c505a chips.
116 
117 config AIRO_CS
118         tristate "Cisco/Aironet 34X/35X/4500/4800 PCMCIA cards"
119         depends on PCMCIA && (BROKEN || !M32R)
120         select WIRELESS_EXT
121         select WEXT_SPY
122         select WEXT_PRIV
123         select CRYPTO
124         select CRYPTO_AES
125         ---help---
126           This is the standard Linux driver to support Cisco/Aironet PCMCIA
127           802.11 wireless cards.  This driver is the same as the Aironet
128           driver part of the Linux Pcmcia package.
129           It supports the new 802.11b cards from Cisco (Cisco 34X, Cisco 35X
130           - with or without encryption) as well as card before the Cisco
131           acquisition (Aironet 4500, Aironet 4800, Aironet 4800B). It also
132           supports OEM of Cisco such as the DELL TrueMobile 4800 and Xircom
133           802.11b cards.
134 
135           This driver support both the standard Linux Wireless Extensions
136           and Cisco proprietary API, so both the Linux Wireless Tools and the
137           Cisco Linux utilities can be used to configure the card.
138 
139 config PCMCIA_WL3501
140         tristate "Planet WL3501 PCMCIA cards"
141         depends on PCMCIA
142         select WIRELESS_EXT
143         select WEXT_SPY
144         help
145           A driver for WL3501 PCMCIA 802.11 wireless cards made by Planet.
146           It has basic support for Linux wireless extensions and initial
147           micro support for ethtool.
148 
149 config PRISM54
150         tristate 'Intersil Prism GT/Duette/Indigo PCI/Cardbus (DEPRECATED)'
151         depends on PCI
152         select WIRELESS_EXT
153         select WEXT_SPY
154         select WEXT_PRIV
155         select FW_LOADER
156         ---help---
157           This enables support for FullMAC PCI/Cardbus prism54 devices. This
158           driver is now deprecated in favor for the SoftMAC driver, p54pci.
159           p54pci supports FullMAC PCI/Cardbus devices as well.
160 
161           For more information refer to the p54 wiki:
162 
163           http://wireless.kernel.org/en/users/Drivers/p54
164 
165           Note: You need a motherboard with DMA support to use any of these cards
166 
167           When built as module you get the module prism54
168 
169 config USB_ZD1201
170         tristate "USB ZD1201 based Wireless device support"
171         depends on USB
172         select WIRELESS_EXT
173         select WEXT_PRIV
174         select FW_LOADER
175         ---help---
176           Say Y if you want to use wireless LAN adapters based on the ZyDAS
177           ZD1201 chip.
178 
179           This driver makes the adapter appear as a normal Ethernet interface,
180           typically on wlan0.
181 
182           The zd1201 device requires external firmware to be loaded.
183           This can be found at http://linux-lc100020.sourceforge.net/
184 
185           To compile this driver as a module, choose M here: the
186           module will be called zd1201.
187 
188 config USB_NET_RNDIS_WLAN
189         tristate "Wireless RNDIS USB support"
190         depends on USB
191         depends on CFG80211
192         select USB_USBNET
193         select USB_NET_CDCETHER
194         select USB_NET_RNDIS_HOST
195         ---help---
196           This is a driver for wireless RNDIS devices.
197           These are USB based adapters found in devices such as:
198 
199           Buffalo WLI-U2-KG125S
200           U.S. Robotics USR5421
201           Belkin F5D7051
202           Linksys WUSB54GSv2
203           Linksys WUSB54GSC
204           Asus WL169gE
205           Eminent EM4045
206           BT Voyager 1055
207           Linksys WUSB54GSv1
208           U.S. Robotics USR5420
209           BUFFALO WLI-USB-G54
210 
211           All of these devices are based on Broadcom 4320 chip which is the
212           only wireless RNDIS chip known to date.
213 
214           If you choose to build a module, it'll be called rndis_wlan.
215 
216 source "drivers/net/wireless/rtl818x/Kconfig"
217 
218 config ADM8211
219         tristate "ADMtek ADM8211 support"
220         depends on MAC80211 && PCI
221         select CRC32
222         select EEPROM_93CX6
223         ---help---
224           This driver is for ADM8211A, ADM8211B, and ADM8211C based cards.
225           These are PCI/mini-PCI/Cardbus 802.11b chips found in cards such as:
226 
227           Xterasys Cardbus XN-2411b
228           Blitz NetWave Point PC
229           TrendNet 221pc
230           Belkin F5D6001
231           SMC 2635W
232           Linksys WPC11 v1
233           Fiberline FL-WL-200X
234           3com Office Connect (3CRSHPW796)
235           Corega WLPCIB-11
236           SMC 2602W V2 EU
237           D-Link DWL-520 Revision C
238 
239           However, some of these cards have been replaced with other chips
240           like the RTL8180L (Xterasys Cardbus XN-2411b, Belkin F5D6001) or
241           the Ralink RT2400 (SMC2635W) without a model number change.
242 
243           Thanks to Infineon-ADMtek for their support of this driver.
244 
245 config MAC80211_HWSIM
246         tristate "Simulated radio testing tool for mac80211"
247         depends on MAC80211
248         ---help---
249           This driver is a developer testing tool that can be used to test
250           IEEE 802.11 networking stack (mac80211) functionality. This is not
251           needed for normal wireless LAN usage and is only for testing. See
252           Documentation/networking/mac80211_hwsim for more information on how
253           to use this tool.
254 
255           To compile this driver as a module, choose M here: the module will be
256           called mac80211_hwsim.  If unsure, say N.
257 
258 config MWL8K
259         tristate "Marvell 88W8xxx PCI/PCIe Wireless support"
260         depends on MAC80211 && PCI
261         ---help---
262           This driver supports Marvell TOPDOG 802.11 wireless cards.
263 
264           To compile this driver as a module, choose M here: the module
265           will be called mwl8k.  If unsure, say N.
266 
267 source "drivers/net/wireless/ath/Kconfig"
268 source "drivers/net/wireless/b43/Kconfig"
269 source "drivers/net/wireless/b43legacy/Kconfig"
270 source "drivers/net/wireless/brcm80211/Kconfig"
271 source "drivers/net/wireless/hostap/Kconfig"
272 source "drivers/net/wireless/ipw2x00/Kconfig"
273 source "drivers/net/wireless/iwlwifi/Kconfig"
274 source "drivers/net/wireless/iwlegacy/Kconfig"
275 source "drivers/net/wireless/libertas/Kconfig"
276 source "drivers/net/wireless/orinoco/Kconfig"
277 source "drivers/net/wireless/p54/Kconfig"
278 source "drivers/net/wireless/rt2x00/Kconfig"
279 source "drivers/net/wireless/rtlwifi/Kconfig"
280 source "drivers/net/wireless/ti/Kconfig"
281 source "drivers/net/wireless/zd1211rw/Kconfig"
282 source "drivers/net/wireless/mwifiex/Kconfig"
283 source "drivers/net/wireless/cw1200/Kconfig"
284 
285 endif # WLAN

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us