Version:  2.0.40 2.2.26 2.4.37 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

Linux/drivers/net/ethernet/ti/Kconfig

  1 #
  2 # TI device configuration
  3 #
  4 
  5 config NET_VENDOR_TI
  6         bool "Texas Instruments (TI) devices"
  7         default y
  8         depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
  9         ---help---
 10           If you have a network (Ethernet) card belonging to this class, say Y.
 11 
 12           Note that the answer to this question doesn't directly affect the
 13           kernel: saying N will just cause the configurator to skip all
 14           the questions about TI devices. If you say Y, you will be asked for
 15           your specific card in the following questions.
 16 
 17 if NET_VENDOR_TI
 18 
 19 config TI_DAVINCI_EMAC
 20         tristate "TI DaVinci EMAC Support"
 21         depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
 22         select TI_DAVINCI_MDIO
 23         select TI_DAVINCI_CPDMA
 24         select PHYLIB
 25         ---help---
 26           This driver supports TI's DaVinci Ethernet .
 27 
 28           To compile this driver as a module, choose M here: the module
 29           will be called davinci_emac_driver.  This is recommended.
 30 
 31 config TI_DAVINCI_MDIO
 32         tristate "TI DaVinci MDIO Support"
 33         depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
 34         select PHYLIB
 35         ---help---
 36           This driver supports TI's DaVinci MDIO module.
 37 
 38           To compile this driver as a module, choose M here: the module
 39           will be called davinci_mdio.  This is recommended.
 40 
 41 config TI_DAVINCI_CPDMA
 42         tristate "TI DaVinci CPDMA Support"
 43         depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
 44         ---help---
 45           This driver supports TI's DaVinci CPDMA dma engine.
 46 
 47           To compile this driver as a module, choose M here: the module
 48           will be called davinci_cpdma.  This is recommended.
 49 
 50 config TI_CPSW_PHY_SEL
 51         bool
 52         ---help---
 53           This driver supports configuring of the phy mode connected to
 54           the CPSW.
 55 
 56 config TI_CPSW_ALE
 57         tristate "TI CPSW ALE Support"
 58         ---help---
 59           This driver supports TI's CPSW ALE module.
 60 
 61 config TI_CPSW
 62         tristate "TI CPSW Switch Support"
 63         depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
 64         select TI_DAVINCI_CPDMA
 65         select TI_DAVINCI_MDIO
 66         select TI_CPSW_PHY_SEL
 67         select TI_CPSW_ALE
 68         select MFD_SYSCON
 69         select REGMAP
 70         ---help---
 71           This driver supports TI's CPSW Ethernet Switch.
 72 
 73           To compile this driver as a module, choose M here: the module
 74           will be called cpsw.
 75 
 76 config TI_CPTS
 77         bool "TI Common Platform Time Sync (CPTS) Support"
 78         depends on TI_CPSW
 79         select PTP_1588_CLOCK
 80         ---help---
 81           This driver supports the Common Platform Time Sync unit of
 82           the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
 83           and Layer 2 packets, and the driver offers a PTP Hardware Clock.
 84 
 85 config TI_KEYSTONE_NETCP
 86         tristate "TI Keystone NETCP Core Support"
 87         select TI_CPSW_ALE
 88         select TI_DAVINCI_MDIO
 89         depends on OF
 90         depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
 91         ---help---
 92           This driver supports TI's Keystone NETCP Core.
 93 
 94           To compile this driver as a module, choose M here: the module
 95           will be called keystone_netcp.
 96 
 97 config TI_KEYSTONE_NETCP_ETHSS
 98         depends on TI_KEYSTONE_NETCP
 99         tristate "TI Keystone NETCP Ethernet subsystem Support"
100         ---help---
101 
102           To compile this driver as a module, choose M here: the module
103           will be called keystone_netcp_ethss.
104 
105 config TLAN
106         tristate "TI ThunderLAN support"
107         depends on (PCI || EISA)
108         ---help---
109           If you have a PCI Ethernet network card based on the ThunderLAN chip
110           which is supported by this driver, say Y here.
111 
112           Devices currently supported by this driver are Compaq Netelligent,
113           Compaq NetFlex and Olicom cards.  Please read the file
114           <file:Documentation/networking/tlan.txt> for more details.
115 
116           To compile this driver as a module, choose M here. The module
117           will be called tlan.
118 
119           Please email feedback to <torben.mathiasen@compaq.com>.
120 
121 config CPMAC
122         tristate "TI AR7 CPMAC Ethernet support"
123         depends on AR7
124         select PHYLIB
125         ---help---
126           TI AR7 CPMAC Ethernet support
127 
128 endif # NET_VENDOR_TI

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us