Version:  2.0.40 2.2.26 2.4.37 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9 4.10

Linux/drivers/net/ethernet/sfc/Kconfig

  1 #
  2 # Solarflare device configuration
  3 #
  4 
  5 config NET_VENDOR_SOLARFLARE
  6         bool "Solarflare devices"
  7         default y
  8         ---help---
  9           If you have a network (Ethernet) card belonging to this class, say Y.
 10 
 11           Note that the answer to this question doesn't directly affect the
 12           kernel: saying N will just cause the configurator to skip all
 13           the questions about Solarflare devices. If you say Y, you will be asked
 14           for your specific card in the following questions.
 15 
 16 if NET_VENDOR_SOLARFLARE
 17 
 18 config SFC
 19         tristate "Solarflare SFC9000/SFC9100-family support"
 20         depends on PCI
 21         select MDIO
 22         select CRC32
 23         select I2C
 24         select I2C_ALGOBIT
 25         imply PTP_1588_CLOCK
 26         ---help---
 27           This driver supports 10/40-gigabit Ethernet cards based on
 28           the Solarflare SFC9000-family and SFC9100-family controllers.
 29 
 30           To compile this driver as a module, choose M here.  The module
 31           will be called sfc.
 32 config SFC_MTD
 33         bool "Solarflare SFC9000/SFC9100-family MTD support"
 34         depends on SFC && MTD && !(SFC=y && MTD=m)
 35         default y
 36         ---help---
 37           This exposes the on-board flash and/or EEPROM as MTD devices
 38           (e.g. /dev/mtd1).  This is required to update the firmware or
 39           the boot configuration under Linux.
 40 config SFC_MCDI_MON
 41         bool "Solarflare SFC9000/SFC9100-family hwmon support"
 42         depends on SFC && HWMON && !(SFC=y && HWMON=m)
 43         default y
 44         ---help---
 45           This exposes the on-board firmware-managed sensors as a
 46           hardware monitor device.
 47 config SFC_SRIOV
 48         bool "Solarflare SFC9000-family SR-IOV support"
 49         depends on SFC && PCI_IOV
 50         default y
 51         ---help---
 52           This enables support for the SFC9000 I/O Virtualization
 53           features, allowing accelerated network performance in
 54           virtualized environments.
 55 config SFC_MCDI_LOGGING
 56         bool "Solarflare SFC9000/SFC9100-family MCDI logging support"
 57         depends on SFC
 58         default y
 59         ---help---
 60           This enables support for tracing of MCDI (Management-Controller-to-
 61           Driver-Interface) commands and responses, allowing debugging of
 62           driver/firmware interaction.  The tracing is actually enabled by
 63           a sysfs file 'mcdi_logging' under the PCI device.
 64 
 65 source "drivers/net/ethernet/sfc/falcon/Kconfig"
 66 
 67 endif # NET_VENDOR_SOLARFLARE

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us