Version:  2.0.40 2.2.26 2.4.37 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

Linux/drivers/net/ethernet/chelsio/Kconfig

  1 #
  2 # Chelsio device configuration
  3 #
  4 
  5 config NET_VENDOR_CHELSIO
  6         bool "Chelsio devices"
  7         default y
  8         depends on PCI
  9         ---help---
 10           If you have a network (Ethernet) card belonging to this class, say Y.
 11 
 12           Note that the answer to this question doesn't directly affect the
 13           kernel: saying N will just cause the configurator to skip all
 14           the questions about Chelsio devices. If you say Y, you will be asked for
 15           your specific card in the following questions.
 16 
 17 if NET_VENDOR_CHELSIO
 18 
 19 config CHELSIO_T1
 20         tristate "Chelsio 10Gb Ethernet support"
 21         depends on PCI
 22         select CRC32
 23         select MDIO
 24         ---help---
 25           This driver supports Chelsio gigabit and 10-gigabit
 26           Ethernet cards. More information about adapter features and
 27           performance tuning is in <file:Documentation/networking/cxgb.txt>.
 28 
 29           For general information about Chelsio and our products, visit
 30           our website at <http://www.chelsio.com>.
 31 
 32           For customer support, please visit our customer support page at
 33           <http://www.chelsio.com/support.html>.
 34 
 35           Please send feedback to <linux-bugs@chelsio.com>.
 36 
 37           To compile this driver as a module, choose M here: the module
 38           will be called cxgb.
 39 
 40 config CHELSIO_T1_1G
 41         bool "Chelsio gigabit Ethernet support"
 42         depends on CHELSIO_T1
 43         ---help---
 44           Enables support for Chelsio's gigabit Ethernet PCI cards.  If you
 45           are using only 10G cards say 'N' here.
 46 
 47 config CHELSIO_T3
 48         tristate "Chelsio Communications T3 10Gb Ethernet support"
 49         depends on PCI && INET
 50         select FW_LOADER
 51         select MDIO
 52         ---help---
 53           This driver supports Chelsio T3-based gigabit and 10Gb Ethernet
 54           adapters.
 55 
 56           For general information about Chelsio and our products, visit
 57           our website at <http://www.chelsio.com>.
 58 
 59           For customer support, please visit our customer support page at
 60           <http://www.chelsio.com/support.html>.
 61 
 62           Please send feedback to <linux-bugs@chelsio.com>.
 63 
 64           To compile this driver as a module, choose M here: the module
 65           will be called cxgb3.
 66 
 67 config CHELSIO_T4
 68         tristate "Chelsio Communications T4/T5/T6 Ethernet support"
 69         depends on PCI && (IPV6 || IPV6=n)
 70         select FW_LOADER
 71         select MDIO
 72         ---help---
 73           This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
 74           adapter and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
 75           Ethernet adapters.
 76 
 77           For general information about Chelsio and our products, visit
 78           our website at <http://www.chelsio.com>.
 79 
 80           For customer support, please visit our customer support page at
 81           <http://www.chelsio.com/support.html>.
 82 
 83           Please send feedback to <linux-bugs@chelsio.com>.
 84 
 85           To compile this driver as a module choose M here; the module
 86           will be called cxgb4.
 87 
 88 config CHELSIO_T4_DCB
 89         bool "Data Center Bridging (DCB) Support for Chelsio T4/T5/T6 cards"
 90         default n
 91         depends on CHELSIO_T4 && DCB
 92         ---help---
 93           Enable DCB support through rtNetlink interface.
 94           Say Y here if you want to enable Data Center Bridging (DCB) support
 95           in the driver.
 96 
 97           If unsure, say N.
 98 
 99 config CHELSIO_T4_FCOE
100         bool "Fibre Channel over Ethernet (FCoE) Support for Chelsio T5 cards"
101         default n
102         depends on CHELSIO_T4 && CHELSIO_T4_DCB && FCOE
103         ---help---
104           Enable FCoE offload features.
105           Say Y here if you want to enable Fibre Channel over Ethernet (FCoE) support
106           in the driver.
107 
108           If unsure, say N.
109 
110 config CHELSIO_T4VF
111         tristate "Chelsio Communications T4/T5/T6 Virtual Function Ethernet support"
112         depends on PCI
113         ---help---
114           This driver supports Chelsio T4, T5 & T6 based gigabit, 10Gb Ethernet
115           adapters and T5/T6 based 40Gb and T6 based 25Gb, 50Gb and 100Gb
116           Ethernet adapters with PCI-E SR-IOV Virtual Functions.
117 
118           For general information about Chelsio and our products, visit
119           our website at <http://www.chelsio.com>.
120 
121           For customer support, please visit our customer support page at
122           <http://www.chelsio.com/support.html>.
123 
124           Please send feedback to <linux-bugs@chelsio.com>.
125 
126           To compile this driver as a module choose M here; the module
127           will be called cxgb4vf.
128 
129 config CHELSIO_LIB
130         tristate
131         ---help---
132         Common library for Chelsio drivers.
133 
134 endif # NET_VENDOR_CHELSIO

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us