Version:  2.0.40 2.2.26 2.4.37 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18

Linux/drivers/net/ethernet/broadcom/Kconfig

  1 #
  2 # Broadcom device configuration
  3 #
  4 
  5 config NET_VENDOR_BROADCOM
  6         bool "Broadcom devices"
  7         default y
  8         depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
  9                    SIBYTE_SB1xxx_SOC
 10         ---help---
 11           If you have a network (Ethernet) chipset belonging to this class,
 12           say Y.
 13 
 14           Note that the answer to this question does not directly affect
 15           the kernel: saying N will just case the configurator to skip all
 16           the questions regarding AMD chipsets. If you say Y, you will be asked
 17           for your specific chipset/driver in the following questions.
 18 
 19 if NET_VENDOR_BROADCOM
 20 
 21 config B44
 22         tristate "Broadcom 440x/47xx ethernet support"
 23         depends on SSB_POSSIBLE && HAS_DMA
 24         select SSB
 25         select MII
 26         select PHYLIB
 27         ---help---
 28           If you have a network (Ethernet) controller of this type, say Y
 29           or M and read the Ethernet-HOWTO, available from
 30           <http://www.tldp.org/docs.html#howto>.
 31 
 32           To compile this driver as a module, choose M here. The module
 33           will be called b44.
 34 
 35 # Auto-select SSB PCI-HOST support, if possible
 36 config B44_PCI_AUTOSELECT
 37         bool
 38         depends on B44 && SSB_PCIHOST_POSSIBLE
 39         select SSB_PCIHOST
 40         default y
 41 
 42 # Auto-select SSB PCICORE driver, if possible
 43 config B44_PCICORE_AUTOSELECT
 44         bool
 45         depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
 46         select SSB_DRIVER_PCICORE
 47         default y
 48 
 49 config B44_PCI
 50         bool
 51         depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
 52         default y
 53 
 54 config BCM63XX_ENET
 55         tristate "Broadcom 63xx internal mac support"
 56         depends on BCM63XX
 57         select MII
 58         select PHYLIB
 59         help
 60           This driver supports the ethernet MACs in the Broadcom 63xx
 61           MIPS chipset family (BCM63XX).
 62 
 63 config BCMGENET
 64         tristate "Broadcom GENET internal MAC support"
 65         depends on OF
 66         select MII
 67         select PHYLIB
 68         select FIXED_PHY if BCMGENET=y
 69         select BCM7XXX_PHY
 70         help
 71           This driver supports the built-in Ethernet MACs found in the
 72           Broadcom BCM7xxx Set Top Box family chipset.
 73 
 74 config BNX2
 75         tristate "QLogic NetXtremeII support"
 76         depends on PCI
 77         select CRC32
 78         select FW_LOADER
 79         ---help---
 80           This driver supports QLogic NetXtremeII gigabit Ethernet cards.
 81 
 82           To compile this driver as a module, choose M here: the module
 83           will be called bnx2.  This is recommended.
 84 
 85 config CNIC
 86         tristate "QLogic CNIC support"
 87         depends on PCI && (IPV6 || IPV6=n)
 88         select BNX2
 89         select UIO
 90         ---help---
 91           This driver supports offload features of QLogic NetXtremeII
 92           gigabit Ethernet cards.
 93 
 94           To compile this driver as a module, choose M here: the module
 95           will be called cnic.  This is recommended.
 96 
 97 config SB1250_MAC
 98         tristate "SB1250 Gigabit Ethernet support"
 99         depends on SIBYTE_SB1xxx_SOC
100         select PHYLIB
101         ---help---
102           This driver supports Gigabit Ethernet interfaces based on the
103           Broadcom SiByte family of System-On-a-Chip parts.  They include
104           the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
105           and BCM1480 chips.
106 
107           To compile this driver as a module, choose M here: the module
108           will be called sb1250-mac.
109 
110 config TIGON3
111         tristate "Broadcom Tigon3 support"
112         depends on PCI
113         select PHYLIB
114         select HWMON
115         select PTP_1588_CLOCK
116         ---help---
117           This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
118 
119           To compile this driver as a module, choose M here: the module
120           will be called tg3.  This is recommended.
121 
122 config BNX2X
123         tristate "Broadcom NetXtremeII 10Gb support"
124         depends on PCI
125         select PTP_1588_CLOCK
126         select FW_LOADER
127         select ZLIB_INFLATE
128         select LIBCRC32C
129         select MDIO
130         ---help---
131           This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
132           To compile this driver as a module, choose M here: the module
133           will be called bnx2x.  This is recommended.
134 
135 config BNX2X_SRIOV
136         bool "Broadcom 578xx and 57712 SR-IOV support"
137         depends on BNX2X && PCI_IOV
138         default y
139         ---help---
140           This configuration parameter enables Single Root Input Output
141           Virtualization support in the 578xx and 57712 products. This
142           allows for virtual function acceleration in virtual environments.
143 
144 config BGMAC
145         tristate "BCMA bus GBit core support"
146         depends on BCMA_HOST_SOC && HAS_DMA && BCM47XX
147         select PHYLIB
148         ---help---
149           This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
150           They can be found on BCM47xx SoCs and provide gigabit ethernet.
151           In case of using this driver on BCM4706 it's also requires to enable
152           BCMA_DRIVER_GMAC_CMN to make it work.
153 
154 config SYSTEMPORT
155         tristate "Broadcom SYSTEMPORT internal MAC support"
156         depends on OF
157         select MII
158         select PHYLIB
159         select FIXED_PHY if SYSTEMPORT=y
160         help
161           This driver supports the built-in Ethernet MACs found in the
162           Broadcom BCM7xxx Set Top Box family chipset using an internal
163           Ethernet switch.
164 
165 endif # NET_VENDOR_BROADCOM

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us