Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/drivers/net/ethernet/amd/Kconfig

  1 #
  2 # AMD network device configuration
  3 #
  4 
  5 config NET_VENDOR_AMD
  6         bool "AMD devices"
  7         default y
  8         depends on DIO || MACH_DECSTATION || MVME147 || ATARI || SUN3 || \
  9                    SUN3X || SBUS || PCI || ZORRO || (ISA && ISA_DMA_API) || \
 10                    (ARM && ARCH_EBSA110) || ISA || EISA || PCMCIA
 11         ---help---
 12           If you have a network (Ethernet) chipset belonging to this class,
 13           say Y.
 14 
 15           Note that the answer to this question does not directly affect
 16           the kernel: saying N will just case the configurator to skip all
 17           the questions regarding AMD chipsets. If you say Y, you will be asked
 18           for your specific chipset/driver in the following questions.
 19 
 20 if NET_VENDOR_AMD
 21 
 22 config A2065
 23         tristate "A2065 support"
 24         depends on ZORRO
 25         select CRC32
 26         ---help---
 27           If you have a Commodore A2065 Ethernet adapter, say Y. Otherwise,
 28           say N.
 29 
 30           To compile this driver as a module, choose M here: the module
 31           will be called a2065.
 32 
 33 config AMD8111_ETH
 34         tristate "AMD 8111 (new PCI LANCE) support"
 35         depends on PCI
 36         select CRC32
 37         select MII
 38         ---help---
 39           If you have an AMD 8111-based PCI LANCE ethernet card,
 40           answer Y here and read the Ethernet-HOWTO, available from
 41           <http://www.tldp.org/docs.html#howto>.
 42 
 43           To compile this driver as a module, choose M here. The module
 44           will be called amd8111e.
 45 
 46 config LANCE
 47         tristate "AMD LANCE and PCnet (AT1500 and NE2100) support"
 48         depends on ISA && ISA_DMA_API
 49         ---help---
 50           If you have a network (Ethernet) card of this type, say Y and read
 51           the Ethernet-HOWTO, available from
 52           <http://www.tldp.org/docs.html#howto>. Some LinkSys cards are
 53           of this type.
 54 
 55           To compile this driver as a module, choose M here: the module
 56           will be called lance.  This is recommended.
 57 
 58 config PCNET32
 59         tristate "AMD PCnet32 PCI support"
 60         depends on PCI
 61         select CRC32
 62         select MII
 63         ---help---
 64           If you have a PCnet32 or PCnetPCI based network (Ethernet) card,
 65           answer Y here and read the Ethernet-HOWTO, available from
 66           <http://www.tldp.org/docs.html#howto>.
 67 
 68           To compile this driver as a module, choose M here. The module
 69           will be called pcnet32.
 70 
 71 config ARIADNE
 72         tristate "Ariadne support"
 73         depends on ZORRO
 74         ---help---
 75           If you have a Village Tronic Ariadne Ethernet adapter, say Y.
 76           Otherwise, say N.
 77 
 78           To compile this driver as a module, choose M here: the module
 79           will be called ariadne.
 80 
 81 config ARM_AM79C961A
 82         bool "ARM EBSA110 AM79C961A support"
 83         depends on ARM && ARCH_EBSA110
 84         select CRC32
 85         ---help---
 86           If you wish to compile a kernel for the EBSA-110, then you should
 87           always answer Y to this.
 88 
 89 config ATARILANCE
 90         tristate "Atari LANCE support"
 91         depends on ATARI
 92         ---help---
 93           Say Y to include support for several Atari Ethernet adapters based
 94           on the AMD LANCE chipset: RieblCard (with or without battery), or
 95           PAMCard VME (also the version by Rhotron, with different addresses).
 96 
 97 config DECLANCE
 98         tristate "DEC LANCE ethernet controller support"
 99         depends on MACH_DECSTATION
100         select CRC32
101         ---help---
102           This driver is for the series of Ethernet controllers produced by
103           DEC (now Compaq) based on the AMD LANCE chipset, including the
104           DEPCA series.  (This chipset is better known via the NE2100 cards.)
105 
106 config HPLANCE
107         bool "HP on-board LANCE support"
108         depends on DIO
109         select CRC32
110         ---help---
111           If you want to use the builtin "LANCE" Ethernet controller on an
112           HP300 machine, say Y here.
113 
114 config MIPS_AU1X00_ENET
115         tristate "MIPS AU1000 Ethernet support"
116         depends on MIPS_ALCHEMY
117         select PHYLIB
118         select CRC32
119         ---help---
120           If you have an Alchemy Semi AU1X00 based system
121           say Y.  Otherwise, say N.
122 
123 config MVME147_NET
124         tristate "MVME147 (LANCE) Ethernet support"
125         depends on MVME147
126         select CRC32
127         ---help---
128           Support for the on-board Ethernet interface on the Motorola MVME147
129           single-board computer.  Say Y here to include the
130           driver for this chip in your kernel.
131           To compile this driver as a module, choose M here.
132 
133 config PCMCIA_NMCLAN
134         tristate "New Media PCMCIA support"
135         depends on PCMCIA
136         help
137           Say Y here if you intend to attach a New Media Ethernet or LiveWire
138           PCMCIA (PC-card) Ethernet card to your computer.
139 
140           To compile this driver as a module, choose M here: the module will be
141           called nmclan_cs.  If unsure, say N.
142 
143 config NI65
144         tristate "NI6510 support"
145         depends on ISA && ISA_DMA_API
146         ---help---
147           If you have a network (Ethernet) card of this type, say Y and read
148           the Ethernet-HOWTO, available from
149           <http://www.tldp.org/docs.html#howto>.
150 
151           To compile this driver as a module, choose M here. The module
152           will be called ni65.
153 
154 config SUN3LANCE
155         tristate "Sun3/Sun3x on-board LANCE support"
156         depends on (SUN3 || SUN3X)
157         ---help---
158           Most Sun3 and Sun3x motherboards (including the 3/50, 3/60 and 3/80)
159           featured an AMD LANCE 10Mbit Ethernet controller on board; say Y
160           here to compile in the Linux driver for this and enable Ethernet.
161           General Linux information on the Sun 3 and 3x series (now
162           discontinued) is at
163           <http://www.angelfire.com/ca2/tech68k/sun3.html>.
164 
165           If you're not building a kernel for a Sun 3, say N.
166 
167 config SUNLANCE
168         tristate "Sun LANCE support"
169         depends on SBUS
170         select CRC32
171         ---help---
172           This driver supports the "le" interface present on all 32-bit Sparc
173           systems, on some older Ultra systems and as an Sbus option.  These
174           cards are based on the AMD LANCE chipset, which is better known
175           via the NE2100 cards.
176 
177           To compile this driver as a module, choose M here: the module
178           will be called sunlance.
179 
180 endif # NET_VENDOR_AMD

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us