Version:  2.0.40 2.2.26 2.4.37 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18

Linux/drivers/net/ethernet/Kconfig

  1 #
  2 # Ethernet LAN device configuration
  3 #
  4 
  5 menuconfig ETHERNET
  6         bool "Ethernet driver support"
  7         depends on NET
  8         default y
  9         ---help---
 10           This section contains all the Ethernet device drivers.
 11 
 12 if ETHERNET
 13 
 14 config MDIO
 15         tristate
 16 
 17 config SUNGEM_PHY
 18         tristate
 19 
 20 source "drivers/net/ethernet/3com/Kconfig"
 21 source "drivers/net/ethernet/adaptec/Kconfig"
 22 source "drivers/net/ethernet/aeroflex/Kconfig"
 23 source "drivers/net/ethernet/agere/Kconfig"
 24 source "drivers/net/ethernet/allwinner/Kconfig"
 25 source "drivers/net/ethernet/alteon/Kconfig"
 26 source "drivers/net/ethernet/altera/Kconfig"
 27 source "drivers/net/ethernet/amd/Kconfig"
 28 source "drivers/net/ethernet/apm/Kconfig"
 29 source "drivers/net/ethernet/apple/Kconfig"
 30 source "drivers/net/ethernet/arc/Kconfig"
 31 source "drivers/net/ethernet/atheros/Kconfig"
 32 source "drivers/net/ethernet/cadence/Kconfig"
 33 source "drivers/net/ethernet/adi/Kconfig"
 34 source "drivers/net/ethernet/broadcom/Kconfig"
 35 source "drivers/net/ethernet/brocade/Kconfig"
 36 source "drivers/net/ethernet/calxeda/Kconfig"
 37 source "drivers/net/ethernet/chelsio/Kconfig"
 38 source "drivers/net/ethernet/cirrus/Kconfig"
 39 source "drivers/net/ethernet/cisco/Kconfig"
 40 
 41 config CX_ECAT
 42         tristate "Beckhoff CX5020 EtherCAT master support"
 43         depends on PCI
 44         depends on X86 || COMPILE_TEST
 45         ---help---
 46           Driver for EtherCAT master module located on CCAT FPGA
 47           that can be found on Beckhoff CX5020, and possibly other of CX
 48           Beckhoff CX series industrial PCs.
 49 
 50           To compile this driver as a module, choose M here. The module
 51           will be called ec_bhf.
 52 
 53 source "drivers/net/ethernet/davicom/Kconfig"
 54 
 55 config DNET
 56         tristate "Dave ethernet support (DNET)"
 57         depends on HAS_IOMEM
 58         select PHYLIB
 59         ---help---
 60           The Dave ethernet interface (DNET) is found on Qong Board FPGA.
 61           Say Y to include support for the DNET chip.
 62 
 63           To compile this driver as a module, choose M here: the module
 64           will be called dnet.
 65 
 66 source "drivers/net/ethernet/dec/Kconfig"
 67 source "drivers/net/ethernet/dlink/Kconfig"
 68 source "drivers/net/ethernet/emulex/Kconfig"
 69 source "drivers/net/ethernet/neterion/Kconfig"
 70 source "drivers/net/ethernet/faraday/Kconfig"
 71 source "drivers/net/ethernet/freescale/Kconfig"
 72 source "drivers/net/ethernet/fujitsu/Kconfig"
 73 source "drivers/net/ethernet/hisilicon/Kconfig"
 74 source "drivers/net/ethernet/hp/Kconfig"
 75 source "drivers/net/ethernet/ibm/Kconfig"
 76 source "drivers/net/ethernet/intel/Kconfig"
 77 source "drivers/net/ethernet/i825xx/Kconfig"
 78 source "drivers/net/ethernet/xscale/Kconfig"
 79 source "drivers/net/ethernet/icplus/Kconfig"
 80 
 81 config JME
 82         tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
 83         depends on PCI
 84         select CRC32
 85         select MII
 86         ---help---
 87           This driver supports the PCI-Express gigabit ethernet adapters
 88           based on JMicron JMC250 chipset.
 89 
 90           To compile this driver as a module, choose M here. The module
 91           will be called jme.
 92 
 93 config KORINA
 94         tristate "Korina (IDT RC32434) Ethernet support"
 95         depends on MIKROTIK_RB532
 96         ---help---
 97           If you have a Mikrotik RouterBoard 500 or IDT RC32434
 98           based system say Y. Otherwise say N.
 99 
100 config LANTIQ_ETOP
101         tristate "Lantiq SoC ETOP driver"
102         depends on SOC_TYPE_XWAY
103         ---help---
104           Support for the MII0 inside the Lantiq SoC
105 
106 source "drivers/net/ethernet/marvell/Kconfig"
107 source "drivers/net/ethernet/mellanox/Kconfig"
108 source "drivers/net/ethernet/micrel/Kconfig"
109 source "drivers/net/ethernet/microchip/Kconfig"
110 source "drivers/net/ethernet/moxa/Kconfig"
111 source "drivers/net/ethernet/myricom/Kconfig"
112 
113 config FEALNX
114         tristate "Myson MTD-8xx PCI Ethernet support"
115         depends on PCI
116         select CRC32
117         select MII
118         ---help---
119           Say Y here to support the Myson MTD-800 family of PCI-based Ethernet
120           cards. <http://www.myson.com.tw/>
121 
122 source "drivers/net/ethernet/natsemi/Kconfig"
123 source "drivers/net/ethernet/8390/Kconfig"
124 
125 config NET_NETX
126         tristate "NetX Ethernet support"
127         select MII
128         depends on ARCH_NETX
129         ---help---
130           This is support for the Hilscher netX builtin Ethernet ports
131 
132           To compile this driver as a module, choose M here. The module
133           will be called netx-eth.
134 
135 source "drivers/net/ethernet/nuvoton/Kconfig"
136 source "drivers/net/ethernet/nvidia/Kconfig"
137 source "drivers/net/ethernet/nxp/Kconfig"
138 source "drivers/net/ethernet/octeon/Kconfig"
139 source "drivers/net/ethernet/oki-semi/Kconfig"
140 
141 config ETHOC
142         tristate "OpenCores 10/100 Mbps Ethernet MAC support"
143         depends on HAS_IOMEM && HAS_DMA
144         select MII
145         select PHYLIB
146         select CRC32
147         select BITREVERSE
148         ---help---
149           Say Y here if you want to use the OpenCores 10/100 Mbps Ethernet MAC.
150 
151 source "drivers/net/ethernet/packetengines/Kconfig"
152 source "drivers/net/ethernet/pasemi/Kconfig"
153 source "drivers/net/ethernet/qlogic/Kconfig"
154 source "drivers/net/ethernet/qualcomm/Kconfig"
155 source "drivers/net/ethernet/realtek/Kconfig"
156 source "drivers/net/ethernet/renesas/Kconfig"
157 source "drivers/net/ethernet/rdc/Kconfig"
158 
159 config S6GMAC
160         tristate "S6105 GMAC ethernet support"
161         depends on XTENSA_VARIANT_S6000
162         select PHYLIB
163         ---help---
164           This driver supports the on chip ethernet device on the
165           S6105 xtensa processor.
166 
167           To compile this driver as a module, choose M here. The module
168           will be called s6gmac.
169 
170 source "drivers/net/ethernet/samsung/Kconfig"
171 source "drivers/net/ethernet/seeq/Kconfig"
172 source "drivers/net/ethernet/silan/Kconfig"
173 source "drivers/net/ethernet/sis/Kconfig"
174 source "drivers/net/ethernet/sfc/Kconfig"
175 source "drivers/net/ethernet/sgi/Kconfig"
176 source "drivers/net/ethernet/smsc/Kconfig"
177 source "drivers/net/ethernet/stmicro/Kconfig"
178 source "drivers/net/ethernet/sun/Kconfig"
179 source "drivers/net/ethernet/tehuti/Kconfig"
180 source "drivers/net/ethernet/ti/Kconfig"
181 source "drivers/net/ethernet/tile/Kconfig"
182 source "drivers/net/ethernet/toshiba/Kconfig"
183 source "drivers/net/ethernet/tundra/Kconfig"
184 source "drivers/net/ethernet/via/Kconfig"
185 source "drivers/net/ethernet/wiznet/Kconfig"
186 source "drivers/net/ethernet/xilinx/Kconfig"
187 source "drivers/net/ethernet/xircom/Kconfig"
188 
189 endif # ETHERNET

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us