Version:  2.0.40 2.2.26 2.4.37 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18

Linux/drivers/net/ethernet/8390/Kconfig

  1 #
  2 # 8390 device configuration
  3 #
  4 
  5 config NET_VENDOR_8390
  6         bool "National Semi-conductor 8390 devices"
  7         default y
  8         depends on NET_VENDOR_NATSEMI
  9         ---help---
 10           If you have a network (Ethernet) card belonging to this class, say Y
 11           and read the Ethernet-HOWTO, available from
 12           <http://www.tldp.org/docs.html#howto>.
 13 
 14           Note that the answer to this question doesn't directly affect the
 15           kernel: saying N will just cause the configurator to skip all
 16           the questions about Western Digital cards. If you say Y, you will be
 17           asked for your specific card in the following questions.
 18 
 19 if NET_VENDOR_8390
 20 
 21 config PCMCIA_AXNET
 22         tristate "Asix AX88190 PCMCIA support"
 23         depends on PCMCIA
 24         ---help---
 25           Say Y here if you intend to attach an Asix AX88190-based PCMCIA
 26           (PC-card) Fast Ethernet card to your computer.  These cards are
 27           nearly NE2000 compatible but need a separate driver due to a few
 28           misfeatures.
 29 
 30           To compile this driver as a module, choose M here: the module will be
 31           called axnet_cs.  If unsure, say N.
 32 
 33 config AX88796
 34         tristate "ASIX AX88796 NE2000 clone support"
 35         depends on (ARM || MIPS || SUPERH)
 36         select CRC32
 37         select PHYLIB
 38         select MDIO_BITBANG
 39         ---help---
 40           AX88796 driver, using platform bus to provide
 41           chip detection and resources
 42 
 43 config AX88796_93CX6
 44         bool "ASIX AX88796 external 93CX6 eeprom support"
 45         depends on AX88796
 46         select EEPROM_93CX6
 47         ---help---
 48           Select this if your platform comes with an external 93CX6 eeprom.
 49 
 50 config HYDRA
 51         tristate "Hydra support"
 52         depends on ZORRO
 53         select CRC32
 54         ---help---
 55           If you have a Hydra Ethernet adapter, say Y. Otherwise, say N.
 56 
 57           To compile this driver as a module, choose M here: the module
 58           will be called hydra.
 59 
 60 config ARM_ETHERH
 61         tristate "I-cubed EtherH/ANT EtherM support"
 62         depends on ARM && ARCH_ACORN
 63         select CRC32
 64         ---help---
 65           If you have an Acorn system with one of these network cards, you
 66           should say Y to this option if you wish to use it with Linux.
 67 
 68 config MAC8390
 69         bool "Macintosh NS 8390 based ethernet cards"
 70         depends on MAC
 71         select CRC32
 72         ---help---
 73           If you want to include a driver to support Nubus or LC-PDS
 74           Ethernet cards using an NS8390 chipset or its equivalent, say Y
 75           and read the Ethernet-HOWTO, available from
 76           <http://www.tldp.org/docs.html#howto>.
 77 
 78 config MCF8390
 79         tristate "ColdFire NS8390 based Ethernet support"
 80         depends on COLDFIRE
 81         select CRC32
 82         ---help---
 83           This driver is for Ethernet devices using an NS8390-compatible
 84           chipset on many common ColdFire CPU based boards. Many of the older
 85           Freescale dev boards use this, and some other common boards like
 86           some SnapGear routers do as well.
 87 
 88           If you have one of these boards and want to use the network interface
 89           on them then choose Y. To compile this driver as a module, choose M
 90           here, the module will be called mcf8390.
 91 
 92 config NE2000
 93         tristate "NE2000/NE1000 support"
 94         depends on (ISA || (Q40 && m) || M32R || MACH_TX49XX || \
 95                     ATARI_ETHERNEC)
 96         select CRC32
 97         ---help---
 98           If you have a network (Ethernet) card of this type, say Y and read
 99           the Ethernet-HOWTO, available from
100           <http://www.tldp.org/docs.html#howto>.  Many Ethernet cards
101           without a specific driver are compatible with NE2000.
102 
103           If you have a PCI NE2000 card however, say N here and Y to "PCI
104           NE2000 and clone support" below.
105 
106           To compile this driver as a module, choose M here. The module
107           will be called ne.
108 
109 config NE2K_PCI
110         tristate "PCI NE2000 and clones support (see help)"
111         depends on PCI
112         select CRC32
113         ---help---
114           This driver is for NE2000 compatible PCI cards. It will not work
115           with ISA NE2000 cards (they have their own driver, "NE2000/NE1000
116           support" below). If you have a PCI NE2000 network (Ethernet) card,
117           say Y and read the Ethernet-HOWTO, available from
118           <http://www.tldp.org/docs.html#howto>.
119 
120           This driver also works for the following NE2000 clone cards:
121           RealTek RTL-8029  Winbond 89C940  Compex RL2000  KTI ET32P2
122           NetVin NV5000SC   Via 86C926      SureCom NE34   Winbond
123           Holtek HT80232    Holtek HT80229
124 
125           To compile this driver as a module, choose M here. The module
126           will be called ne2k-pci.
127 
128 config APNE
129         tristate "PCMCIA NE2000 support"
130         depends on AMIGA_PCMCIA
131         select CRC32
132         ---help---
133           If you have a PCMCIA NE2000 compatible adapter, say Y.  Otherwise,
134           say N.
135 
136           To compile this driver as a module, choose M here: the module
137           will be called apne.
138 
139 config PCMCIA_PCNET
140         tristate "NE2000 compatible PCMCIA support"
141         depends on PCMCIA
142         select CRC32
143         ---help---
144           Say Y here if you intend to attach an NE2000 compatible PCMCIA
145           (PC-card) Ethernet or Fast Ethernet card to your computer.
146 
147           To compile this driver as a module, choose M here: the module will be
148           called pcnet_cs.  If unsure, say N.
149 
150 config STNIC
151         tristate "National DP83902AV  support"
152         depends on SUPERH
153         select CRC32
154         ---help---
155           Support for cards based on the National Semiconductor DP83902AV
156           ST-NIC Serial Network Interface Controller for Twisted Pair.  This
157           is a 10Mbit/sec Ethernet controller.  Product overview and specs at
158           <http://www.national.com/pf/DP/DP83902A.html>.
159 
160           If unsure, say N.
161 
162 config ULTRA
163         tristate "SMC Ultra support"
164         depends on ISA
165         select CRC32
166         ---help---
167           If you have a network (Ethernet) card of this type, say Y and read
168           the Ethernet-HOWTO, available from
169           <http://www.tldp.org/docs.html#howto>.
170 
171           Important: There have been many reports that, with some motherboards
172           mixing an SMC Ultra and an Adaptec AHA154x SCSI card (or compatible,
173           such as some BusLogic models) causes corruption problems with many
174           operating systems. The Linux smc-ultra driver has a work-around for
175           this but keep it in mind if you have such a SCSI card and have
176           problems.
177 
178           To compile this driver as a module, choose M here. The module
179           will be called smc-ultra.
180 
181 config WD80x3
182         tristate "WD80*3 support"
183         depends on ISA
184         select CRC32
185         ---help---
186           If you have a network (Ethernet) card of this type, say Y and read
187           the Ethernet-HOWTO, available from
188           <http://www.tldp.org/docs.html#howto>.
189 
190           To compile this driver as a module, choose M here. The module
191           will be called wd.
192 
193 config ZORRO8390
194         tristate "Zorro NS8390-based Ethernet support"
195         depends on ZORRO
196         select CRC32
197         ---help---
198           This driver is for Zorro Ethernet cards using an NS8390-compatible
199           chipset, like the Village Tronic Ariadne II and the Individual
200           Computers X-Surf Ethernet cards. If you have such a card, say Y.
201           Otherwise, say N.
202 
203           To compile this driver as a module, choose M here: the module
204           will be called zorro8390.
205 
206 endif # NET_VENDOR_8390

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us