Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/drivers/net/arcnet/Kconfig

  1 #
  2 # Arcnet configuration
  3 #
  4 
  5 menuconfig ARCNET
  6         depends on NETDEVICES && (ISA || PCI || PCMCIA)
  7         tristate "ARCnet support"
  8         ---help---
  9           If you have a network card of this type, say Y and check out the
 10           (arguably) beautiful poetry in
 11           <file:Documentation/networking/arcnet.txt>.
 12 
 13           You need both this driver, and the driver for the particular ARCnet
 14           chipset of your card. If you don't know, then it's probably a
 15           COM90xx type card, so say Y (or M) to "ARCnet COM90xx chipset
 16           support" below.
 17 
 18           You might also want to have a look at the Ethernet-HOWTO, available
 19           from <http://www.tldp.org/docs.html#howto>(even though ARCnet
 20           is not really Ethernet).
 21 
 22           To compile this driver as a module, choose M here. The module will
 23           be called arcnet.
 24 
 25 if ARCNET
 26 
 27 config ARCNET_1201
 28         tristate "Enable standard ARCNet packet format (RFC 1201)"
 29         help
 30           This allows you to use RFC1201 with your ARCnet card via the virtual
 31           arc0 device.  You need to say Y here to communicate with
 32           industry-standard RFC1201 implementations, like the arcether.com
 33           packet driver or most DOS/Windows ODI drivers.  Please read the
 34           ARCnet documentation in <file:Documentation/networking/arcnet.txt>
 35           for more information about using arc0.
 36 
 37 config ARCNET_1051
 38         tristate "Enable old ARCNet packet format (RFC 1051)"
 39         ---help---
 40           This allows you to use RFC1051 with your ARCnet card via the virtual
 41           arc0s device. You only need arc0s if you want to talk to ARCnet
 42           software complying with the "old" standard, specifically, the DOS
 43           arcnet.com packet driver, Amigas running AmiTCP, and some variants
 44           of NetBSD. You do not need to say Y here to communicate with
 45           industry-standard RFC1201 implementations, like the arcether.com
 46           packet driver or most DOS/Windows ODI drivers. RFC1201 is included
 47           automatically as the arc0 device. Please read the ARCnet
 48           documentation in <file:Documentation/networking/arcnet.txt> for more
 49           information about using arc0e and arc0s.
 50 
 51 config ARCNET_RAW
 52         tristate "Enable raw mode packet interface"
 53         help
 54           ARCnet "raw mode" packet encapsulation, no soft headers.  Unlikely
 55           to work unless talking to a copy of the same Linux arcnet driver,
 56           but perhaps marginally faster in that case.
 57 
 58 config ARCNET_CAP
 59         tristate "Enable CAP mode packet interface"
 60         help
 61           ARCnet "cap mode" packet encapsulation. Used to get the hardware
 62           acknowledge back to userspace. After the initial protocol byte every
 63           packet is stuffed with an extra 4 byte "cookie" which doesn't
 64           actually appear on the network. After transmit the driver will send
 65           back a packet with protocol byte 0 containing the status of the
 66           transmission:
 67              0=no hardware acknowledge
 68              1=excessive nak
 69              2=transmission accepted by the receiver hardware
 70 
 71           Received packets are also stuffed with the extra 4 bytes but it will
 72           be random data.
 73 
 74           Cap only listens to protocol 1-8.
 75 
 76 config ARCNET_COM90xx
 77         tristate "ARCnet COM90xx (normal) chipset driver"
 78         help
 79           This is the chipset driver for the standard COM90xx cards. If you
 80           have always used the old ARCnet driver without knowing what type of
 81           card you had, this is probably the one for you.
 82 
 83           To compile this driver as a module, choose M here. The module will
 84           be called com90xx.
 85 
 86 config ARCNET_COM90xxIO
 87         tristate "ARCnet COM90xx (IO mapped) chipset driver"
 88         ---help---
 89           This is the chipset driver for the COM90xx cards, using them in
 90           IO-mapped mode instead of memory-mapped mode. This is slower than
 91           the normal driver. Only use it if your card doesn't support shared
 92           memory.
 93 
 94           To compile this driver as a module, choose M here. The module will
 95           be called com90io.
 96 
 97 config ARCNET_RIM_I
 98         tristate "ARCnet COM90xx (RIM I) chipset driver"
 99         ---help---
100           This is yet another chipset driver for the COM90xx cards, but this
101           time only using memory-mapped mode, and no IO ports at all. This
102           driver is completely untested, so if you have one of these cards,
103           please mail <dwmw2@infradead.org>, especially if it works!
104 
105           To compile this driver as a module, choose M here. The module will
106           be called arc-rimi.
107 
108 config ARCNET_COM20020
109         tristate "ARCnet COM20020 chipset driver"
110         help
111           This is the driver for the new COM20020 chipset. It supports such
112           things as promiscuous mode, so packet sniffing is possible, and
113           extra diagnostic information.
114 
115           To compile this driver as a module, choose M here. The module will
116           be called com20020.
117 
118 config ARCNET_COM20020_ISA
119         tristate "Support for COM20020 on ISA"
120         depends on ARCNET_COM20020 && ISA
121 
122 config ARCNET_COM20020_PCI
123         tristate "Support for COM20020 on PCI"
124         depends on ARCNET_COM20020 && PCI
125 
126 config ARCNET_COM20020_CS
127         tristate "COM20020 ARCnet PCMCIA support"
128         depends on ARCNET_COM20020 && PCMCIA
129         help
130           Say Y here if you intend to attach this type of ARCnet PCMCIA card
131           to your computer.
132 
133           To compile this driver as a module, choose M here: the module will be
134           called com20020_cs.  If unsure, say N.
135 
136 endif # ARCNET

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us