Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/drivers/media/usb/em28xx/Kconfig

  1 config VIDEO_EM28XX
  2         tristate "Empia EM28xx USB devices support"
  3         depends on VIDEO_DEV && I2C
  4         select VIDEO_TUNER
  5         select VIDEO_TVEEPROM
  6 
  7 config VIDEO_EM28XX_V4L2
  8         tristate "Empia EM28xx analog TV, video capture and/or webcam support"
  9         depends on VIDEO_EM28XX
 10         select VIDEOBUF2_VMALLOC
 11         select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
 12         select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
 13         select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
 14         select VIDEO_MT9V011 if MEDIA_SUBDRV_AUTOSELECT
 15 
 16         ---help---
 17           This is a video4linux driver for Empia 28xx based TV cards.
 18 
 19           To compile this driver as a module, choose M here: the
 20           module will be called em28xx
 21 
 22 config VIDEO_EM28XX_ALSA
 23         depends on VIDEO_EM28XX && SND
 24         select SND_PCM
 25         tristate "Empia EM28xx ALSA audio module"
 26         ---help---
 27           This is an ALSA driver for some Empia 28xx based TV cards.
 28 
 29           This is not required for em2800/em2820/em2821 boards. However,
 30           newer em28xx devices uses Vendor Class for audio, instead of
 31           implementing the USB Audio Class. For those chips, this module
 32           will enable digital audio.
 33 
 34           To compile this driver as a module, choose M here: the
 35           module will be called em28xx-alsa
 36 
 37 config VIDEO_EM28XX_DVB
 38         tristate "DVB/ATSC Support for em28xx based TV cards"
 39         depends on VIDEO_EM28XX && DVB_CORE
 40         select DVB_LGDT330X if MEDIA_SUBDRV_AUTOSELECT
 41         select DVB_LGDT3305 if MEDIA_SUBDRV_AUTOSELECT
 42         select DVB_ZL10353 if MEDIA_SUBDRV_AUTOSELECT
 43         select DVB_TDA10023 if MEDIA_SUBDRV_AUTOSELECT
 44         select DVB_S921 if MEDIA_SUBDRV_AUTOSELECT
 45         select DVB_DRXD if MEDIA_SUBDRV_AUTOSELECT
 46         select DVB_CXD2820R if MEDIA_SUBDRV_AUTOSELECT
 47         select DVB_DRXK if MEDIA_SUBDRV_AUTOSELECT
 48         select DVB_TDA18271C2DD if MEDIA_SUBDRV_AUTOSELECT
 49         select DVB_TDA10071 if MEDIA_SUBDRV_AUTOSELECT
 50         select DVB_A8293 if MEDIA_SUBDRV_AUTOSELECT
 51         select DVB_MT352 if MEDIA_SUBDRV_AUTOSELECT
 52         select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
 53         select DVB_MB86A20S if MEDIA_SUBDRV_AUTOSELECT
 54         select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
 55         select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
 56         select MEDIA_TUNER_TDA18212 if MEDIA_SUBDRV_AUTOSELECT
 57         select DVB_M88DS3103 if MEDIA_SUBDRV_AUTOSELECT
 58         select MEDIA_TUNER_M88TS2022 if MEDIA_SUBDRV_AUTOSELECT
 59         select DVB_DRX39XYJ if MEDIA_SUBDRV_AUTOSELECT
 60         select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT
 61         select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT
 62         ---help---
 63           This adds support for DVB cards based on the
 64           Empiatech em28xx chips.
 65 
 66 config VIDEO_EM28XX_RC
 67         tristate "EM28XX Remote Controller support"
 68         depends on RC_CORE
 69         depends on VIDEO_EM28XX
 70         depends on !(RC_CORE=m && VIDEO_EM28XX=y)
 71         default VIDEO_EM28XX
 72         ---help---
 73           Enables Remote Controller support on em28xx driver.

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us