Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/media/platform/davinci/Kconfig

  1 config VIDEO_DAVINCI_VPIF_DISPLAY
  2         tristate "TI DaVinci VPIF V4L2-Display driver"
  3         depends on VIDEO_DEV && ARCH_DAVINCI
  4         select VIDEOBUF2_DMA_CONTIG
  5         select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT
  6         select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT
  7         help
  8           Enables Davinci VPIF module used for display devices.
  9           This module is used for display on TI DM6467/DA850/OMAPL138
 10           SoCs.
 11 
 12           To compile this driver as a module, choose M here. There will
 13           be two modules called vpif.ko and vpif_display.ko
 14 
 15 config VIDEO_DAVINCI_VPIF_CAPTURE
 16         tristate "TI DaVinci VPIF video capture driver"
 17         depends on VIDEO_DEV && ARCH_DAVINCI
 18         select VIDEOBUF2_DMA_CONTIG
 19         help
 20           Enables Davinci VPIF module used for capture devices.
 21           This module is used for capture on TI DM6467/DA850/OMAPL138
 22           SoCs.
 23 
 24           To compile this driver as a module, choose M here. There will
 25           be two modules called vpif.ko and vpif_capture.ko
 26 
 27 config VIDEO_DM6446_CCDC
 28         tristate "TI DM6446 CCDC video capture driver"
 29         depends on VIDEO_V4L2 && (ARCH_DAVINCI || ARCH_OMAP3)
 30         select VIDEOBUF_DMA_CONTIG
 31         help
 32            Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
 33            with decoder modules such as TVP5146 over BT656 or
 34            sensor module such as MT9T001 over a raw interface. This
 35            module configures the interface and CCDC/ISIF to do
 36            video frame capture from slave decoders.
 37 
 38            To compile this driver as a module, choose M here. There will
 39            be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko
 40 
 41 config VIDEO_DM355_CCDC
 42         tristate "TI DM355 CCDC video capture driver"
 43         depends on VIDEO_V4L2 && ARCH_DAVINCI
 44         select VIDEOBUF_DMA_CONTIG
 45         help
 46            Enables DM355 CCD hw module. DM355 CCDC hw interfaces
 47            with decoder modules such as TVP5146 over BT656 or
 48            sensor module such as MT9T001 over a raw interface. This
 49            module configures the interface and CCDC/ISIF to do
 50            video frame capture from a slave decoders
 51 
 52            To compile this driver as a module, choose M here. There will
 53            be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko
 54 
 55 config VIDEO_DM365_ISIF
 56         tristate "TI DM365 ISIF video capture driver"
 57         depends on VIDEO_V4L2 && ARCH_DAVINCI
 58         select VIDEOBUF_DMA_CONTIG
 59         help
 60            Enables ISIF hw module. This is the hardware module for
 61            configuring ISIF in VPFE to capture Raw Bayer RGB data from
 62            a image sensor or YUV data from a YUV source.
 63 
 64            To compile this driver as a module, choose M here. There will
 65            be three modules called vpfe_capture.ko, vpss.ko and isif.ko
 66 
 67 config VIDEO_DAVINCI_VPBE_DISPLAY
 68         tristate "TI DaVinci VPBE V4L2-Display driver"
 69         depends on ARCH_DAVINCI
 70         select VIDEOBUF2_DMA_CONTIG
 71         help
 72             Enables Davinci VPBE module used for display devices.
 73             This module is used for display on TI DM644x/DM365/DM355
 74             based display devices.
 75 
 76             To compile this driver as a module, choose M here. There will
 77             be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
 78             vpbe_venc.ko and vpbe_display.ko

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us