Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/drivers/isdn/hisax/Kconfig

  1 
  2 menu "Passive cards"
  3 
  4 config ISDN_DRV_HISAX
  5         tristate "HiSax SiemensChipSet driver support"
  6         select CRC_CCITT
  7         ---help---
  8           This is a driver supporting the Siemens chipset on various
  9           ISDN-cards (like AVM A1, Elsa ISDN cards, Teles S0-16.0, Teles
 10           S0-16.3, Teles S0-8, Teles/Creatix PnP, ITK micro ix1 and many
 11           compatibles).
 12 
 13           HiSax is just the name of this driver, not the name of any hardware.
 14 
 15           If you have a card with such a chipset, you should say Y here and
 16           also to the configuration option of the driver for your particular
 17           card, below.
 18 
 19 if ISDN_DRV_HISAX
 20 
 21 comment "D-channel protocol features"
 22 
 23 config HISAX_EURO
 24         bool "HiSax Support for EURO/DSS1"
 25         help
 26           Say Y or N according to the D-channel protocol which your local
 27           telephone service company provides.
 28 
 29           The call control protocol E-DSS1 is used in most European countries.
 30           If unsure, say Y.
 31 
 32 config DE_AOC
 33         bool "Support for german chargeinfo"
 34         depends on HISAX_EURO
 35         help
 36           If you want that the HiSax hardware driver sends messages to the
 37           upper level of the isdn code on each AOCD (Advice Of Charge, During
 38           the call -- transmission of the fee information during a call) and
 39           on each AOCE (Advice Of Charge, at the End of the call --
 40           transmission of fee information at the end of the call), say Y here.
 41           This works only in Germany.
 42 
 43 config HISAX_NO_SENDCOMPLETE
 44         bool "Disable sending complete"
 45         depends on HISAX_EURO
 46         help
 47           If you have trouble with some ugly exchanges or you live in
 48           Australia select this option.
 49 
 50 config HISAX_NO_LLC
 51         bool "Disable sending low layer compatibility"
 52         depends on HISAX_EURO
 53         help
 54           If you have trouble with some ugly exchanges try to select this
 55           option.
 56 
 57 config HISAX_NO_KEYPAD
 58         bool "Disable keypad protocol option"
 59         depends on HISAX_EURO
 60         help
 61           If you like to send special dial strings including * or # without
 62           using the keypad protocol, select this option.
 63 
 64 config HISAX_1TR6
 65         bool "HiSax Support for german 1TR6"
 66         help
 67           Say Y or N according to the D-channel protocol which your local
 68           telephone service company provides.
 69 
 70           1TR6 is an old call control protocol which was used in Germany
 71           before E-DSS1 was established. Nowadays, all new lines in Germany
 72           use E-DSS1.
 73 
 74 config HISAX_NI1
 75         bool "HiSax Support for US NI1"
 76         help
 77           Enable this if you like to use ISDN in US on a NI1 basic rate
 78           interface.
 79 
 80 config HISAX_MAX_CARDS
 81         int "Maximum number of cards supported by HiSax"
 82         default "8"
 83         help
 84           This option allows you to specify the maximum number of cards which
 85           the HiSax driver will be able to handle.  
 86 
 87 comment "HiSax supported cards"
 88 
 89 config HISAX_16_0
 90         bool "Teles 16.0/8.0"
 91         depends on ISA
 92         help
 93           This enables HiSax support for the Teles ISDN-cards S0-16.0, S0-8
 94           and many compatibles.
 95 
 96           See <file:Documentation/isdn/README.HiSax> on how to configure it
 97           using the different cards, a different D-channel protocol, or
 98           non-standard IRQ/port/shmem settings.
 99 
100 config HISAX_16_3
101         bool "Teles 16.3 or PNP or PCMCIA"
102         help
103           This enables HiSax support for the Teles ISDN-cards S0-16.3 the
104           Teles/Creatix PnP and the Teles PCMCIA.
105 
106           See <file:Documentation/isdn/README.HiSax> on how to configure it
107           using the different cards, a different D-channel protocol, or
108           non-standard IRQ/port settings.
109 
110 config HISAX_TELESPCI
111         bool "Teles PCI"
112         depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
113         help
114           This enables HiSax support for the Teles PCI.
115           See <file:Documentation/isdn/README.HiSax> on how to configure it.
116 
117 config HISAX_S0BOX
118         bool "Teles S0Box"
119         help
120           This enables HiSax support for the Teles/Creatix parallel port
121           S0BOX.  See <file:Documentation/isdn/README.HiSax> on how to
122           configure it.
123 
124 config HISAX_AVM_A1
125         bool "AVM A1 (Fritz)"
126         depends on ISA
127         help
128           This enables HiSax support for the AVM A1 (aka "Fritz").
129 
130           See <file:Documentation/isdn/README.HiSax> on how to configure it
131           using the different cards, a different D-channel protocol, or
132           non-standard IRQ/port settings.
133 
134 config HISAX_FRITZPCI
135         bool "AVM PnP/PCI (Fritz!PnP/PCI)"
136         depends on BROKEN || !PPC64
137         help
138           This enables HiSax support for the AVM "Fritz!PnP" and "Fritz!PCI".
139           See <file:Documentation/isdn/README.HiSax> on how to configure it.
140 
141 config HISAX_AVM_A1_PCMCIA
142         bool "AVM A1 PCMCIA (Fritz)"
143         help
144           This enables HiSax support for the AVM A1 "Fritz!PCMCIA").
145           See <file:Documentation/isdn/README.HiSax> on how to configure it.
146 
147 config HISAX_ELSA
148         bool "Elsa cards"
149         help
150           This enables HiSax support for the Elsa Mircolink ISA cards, for the
151           Elsa Quickstep series cards and Elsa PCMCIA.
152 
153           See <file:Documentation/isdn/README.HiSax> on how to configure it
154           using the different cards, a different D-channel protocol, or
155           non-standard IRQ/port settings.
156 
157 config HISAX_IX1MICROR2
158         bool "ITK ix1-micro Revision 2"
159         depends on ISA
160         help
161           This enables HiSax support for the ITK ix1-micro Revision 2 card.
162 
163           See <file:Documentation/isdn/README.HiSax> on how to configure it
164           using the different cards, a different D-channel protocol, or
165           non-standard IRQ/port settings.
166 
167 config HISAX_DIEHLDIVA
168         bool "Eicon.Diehl Diva cards"
169         help
170           This enables HiSax support for the Eicon.Diehl Diva none PRO
171           versions passive ISDN cards.
172 
173           See <file:Documentation/isdn/README.HiSax> on how to configure it
174           using the different cards, a different D-channel protocol, or
175           non-standard IRQ/port settings.
176 
177 config HISAX_ASUSCOM
178         bool "ASUSCOM ISA cards"
179         depends on ISA
180         help
181           This enables HiSax support for the AsusCom and their OEM versions
182           passive ISDN ISA cards.
183 
184           See <file:Documentation/isdn/README.HiSax> on how to configure it
185           using the different cards, a different D-channel protocol, or
186           non-standard IRQ/port settings.
187 
188 config HISAX_TELEINT
189         bool "TELEINT cards"
190         depends on ISA
191         help
192           This enables HiSax support for the TELEINT SA1 semiactiv ISDN card.
193 
194           See <file:Documentation/isdn/README.HiSax> on how to configure it
195           using the different cards, a different D-channel protocol, or
196           non-standard IRQ/port settings.
197 
198 config HISAX_HFCS
199         bool "HFC-S based cards"
200         depends on ISA
201         help
202           This enables HiSax support for the HFC-S 2BDS0 based cards, like
203           teles 16.3c.
204 
205           See <file:Documentation/isdn/README.HiSax> on how to configure it
206           using the different cards, a different D-channel protocol, or
207           non-standard IRQ/port settings.
208 
209 config HISAX_SEDLBAUER
210         bool "Sedlbauer cards"
211         help
212           This enables HiSax support for the Sedlbauer passive ISDN cards.
213 
214           See <file:Documentation/isdn/README.HiSax> on how to configure it
215           using the different cards, a different D-channel protocol, or
216           non-standard IRQ/port settings.
217 
218 config HISAX_SPORTSTER
219         bool "USR Sportster internal TA"
220         depends on ISA
221         help
222           This enables HiSax support for the USR Sportster internal TA card.
223 
224           See <file:Documentation/isdn/README.HiSax> on how to configure it
225           using a different D-channel protocol, or non-standard IRQ/port
226           settings.
227 
228 config HISAX_MIC
229         bool "MIC card"
230         depends on ISA
231         help
232           This enables HiSax support for the ITH MIC card.
233 
234           See <file:Documentation/isdn/README.HiSax> on how to configure it
235           using a different D-channel protocol, or non-standard IRQ/port
236           settings.
237 
238 config HISAX_NETJET
239         bool "NETjet card"
240         depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
241         depends on VIRT_TO_BUS
242         help
243           This enables HiSax support for the NetJet from Traverse
244           Technologies.
245 
246           See <file:Documentation/isdn/README.HiSax> on how to configure it
247           using a different D-channel protocol, or non-standard IRQ/port
248           settings.
249 
250 config HISAX_NETJET_U
251         bool "NETspider U card"
252         depends on PCI && (BROKEN || !(PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
253         depends on VIRT_TO_BUS
254         help
255           This enables HiSax support for the Netspider U interface ISDN card
256           from Traverse Technologies.
257           See <file:Documentation/isdn/README.HiSax> on how to configure it
258           using a different D-channel protocol, or non-standard IRQ/port
259           settings.
260 
261 config HISAX_NICCY
262         bool "Niccy PnP/PCI card"
263         help
264           This enables HiSax support for the Dr. Neuhaus Niccy PnP or PCI.
265 
266           See <file:Documentation/isdn/README.HiSax> on how to configure it
267           using a different D-channel protocol, or non-standard IRQ/port
268           settings.
269 
270 config HISAX_ISURF
271         bool "Siemens I-Surf card"
272         depends on ISA
273         help
274           This enables HiSax support for the Siemens I-Talk/I-Surf card with
275           ISAR chip.
276           See <file:Documentation/isdn/README.HiSax> on how to configure it
277           using a different D-channel protocol, or non-standard IRQ/port
278           settings.
279 
280 config HISAX_HSTSAPHIR
281         bool "HST Saphir card"
282         depends on ISA
283         help
284           This enables HiSax support for the HST Saphir card.
285 
286           See <file:Documentation/isdn/README.HiSax> on how to configure it
287           using a different D-channel protocol, or non-standard IRQ/port
288           settings.
289 
290 config HISAX_BKM_A4T
291         bool "Telekom A4T card"
292         depends on PCI
293         help
294           This enables HiSax support for the Telekom A4T card.
295 
296           See <file:Documentation/isdn/README.HiSax> on how to configure it
297           using a different D-channel protocol, or non-standard IRQ/port
298           settings.
299 
300 config HISAX_SCT_QUADRO
301         bool "Scitel Quadro card"
302         depends on PCI
303         help
304           This enables HiSax support for the Scitel Quadro card.
305 
306           See <file:Documentation/isdn/README.HiSax> on how to configure it
307           using a different D-channel protocol, or non-standard IRQ/port
308           settings.
309 
310 config HISAX_GAZEL
311         bool "Gazel cards"
312         help
313           This enables HiSax support for the Gazel cards.
314 
315           See <file:Documentation/isdn/README.HiSax> on how to configure it
316           using a different D-channel protocol, or non-standard IRQ/port
317           settings.
318 
319 config HISAX_HFC_PCI
320         bool "HFC PCI-Bus cards"
321         depends on PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
322         help
323           This enables HiSax support for the HFC-S PCI 2BDS0 based cards.
324 
325           For more information see under
326           <file:Documentation/isdn/README.hfc-pci>.
327 
328 config HISAX_W6692
329         bool "Winbond W6692 based cards"
330         depends on PCI
331         help
332           This enables HiSax support for Winbond W6692 based PCI ISDN cards.
333 
334           See <file:Documentation/isdn/README.HiSax> on how to configure it
335           using a different D-channel protocol, or non-standard IRQ/port
336           settings.
337 
338 config HISAX_HFC_SX
339         bool "HFC-S+, HFC-SP, HFC-PCMCIA cards"
340         help
341           This enables HiSax support for the HFC-S+, HFC-SP and HFC-PCMCIA
342           cards. This code is not finished yet.
343 
344 config HISAX_ENTERNOW_PCI
345         bool "Formula-n enter:now PCI card"
346         depends on HISAX_NETJET && PCI && (BROKEN || !(SPARC || PPC || PARISC || M68K || (MIPS && !CPU_LITTLE_ENDIAN) || FRV || (XTENSA && !CPU_LITTLE_ENDIAN)))
347         help
348           This enables HiSax support for the Formula-n enter:now PCI
349           ISDN card.
350 
351 config HISAX_DEBUG
352         bool "HiSax debugging"
353         help
354           This enables debugging code in the new-style HiSax drivers, i.e.
355           the ST5481 USB driver currently. 
356           If in doubt, say yes.
357 
358 comment "HiSax PCMCIA card service modules"
359 
360 config HISAX_SEDLBAUER_CS
361         tristate "Sedlbauer PCMCIA cards"
362         depends on PCMCIA && HISAX_SEDLBAUER
363         help
364           This enables the PCMCIA client driver for the Sedlbauer Speed Star
365           and Speed Star II cards.
366 
367 config HISAX_ELSA_CS
368         tristate "ELSA PCMCIA MicroLink cards"
369         depends on PCMCIA && HISAX_ELSA
370         help
371           This enables the PCMCIA client driver for the Elsa PCMCIA MicroLink
372           card.
373 
374 config HISAX_AVM_A1_CS
375         tristate "AVM A1 PCMCIA cards"
376         depends on PCMCIA && ISDN_DRV_HISAX
377         help
378           This enables the PCMCIA client driver for the AVM A1 / Fritz!Card
379           PCMCIA cards.
380 
381 config HISAX_TELES_CS
382         tristate "TELES PCMCIA cards"
383         depends on PCMCIA && HISAX_16_3
384         help
385           This enables the PCMCIA client driver for the Teles PCMCIA cards.
386 
387 comment "HiSax sub driver modules"
388 
389 config HISAX_ST5481
390         tristate "ST5481 USB ISDN modem"
391         depends on USB
392         select ISDN_HDLC
393         select CRC_CCITT
394         select BITREVERSE
395         help
396           This enables the driver for ST5481 based USB ISDN adapters,
397           e.g. the BeWan Gazel 128 USB
398 
399 config HISAX_HFCUSB
400         tristate "HFC USB based ISDN modems"
401         depends on USB
402         help
403           This enables the driver for HFC USB based ISDN modems.
404 
405 config HISAX_HFC4S8S
406         tristate "HFC-4S/8S based ISDN cards"
407         help
408           This enables the driver for HFC-4S/8S based ISDN cards.
409 
410 config HISAX_FRITZ_PCIPNP
411         tristate "AVM Fritz!Card PCI/PCIv2/PnP support"
412         depends on PCI
413         help
414           This enables the driver for the AVM Fritz!Card PCI,
415           Fritz!Card PCI v2 and Fritz!Card PnP.
416           (the latter also needs you to select "ISA Plug and Play support"
417           from the menu "Plug and Play configuration")
418 
419 endif
420 
421 endmenu
422 

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us