Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/drivers/isdn/gigaset/Kconfig

  1 menuconfig ISDN_DRV_GIGASET
  2         tristate "Siemens Gigaset support"
  3         depends on TTY
  4         select CRC_CCITT
  5         select BITREVERSE
  6         help
  7           This driver supports the Siemens Gigaset SX205/255 family of
  8           ISDN DECT bases, including the predecessors Gigaset 3070/3075
  9           and 4170/4175 and their T-Com versions Sinus 45isdn and Sinus
 10           721X.
 11           If you have one of these devices, say M here and for at least
 12           one of the connection specific parts that follow.
 13           This will build a module called "gigaset".
 14           Note: If you build your ISDN subsystem (ISDN_CAPI or ISDN_I4L)
 15           as a module, you have to build this driver as a module too,
 16           otherwise the Gigaset device won't show up as an ISDN device.
 17 
 18 if ISDN_DRV_GIGASET
 19 
 20 config GIGASET_CAPI
 21         bool "Gigaset CAPI support"
 22         depends on ISDN_CAPI='y'||(ISDN_CAPI='m'&&ISDN_DRV_GIGASET='m')
 23         default ISDN_I4L='n'
 24         help
 25           Build the Gigaset driver as a CAPI 2.0 driver interfacing with
 26           the Kernel CAPI subsystem. To use it with the old ISDN4Linux
 27           subsystem you'll have to enable the capidrv glue driver.
 28           (select ISDN_CAPI_CAPIDRV.)
 29           Say N to build the old native ISDN4Linux variant.
 30           If unsure, say Y.
 31 
 32 config GIGASET_I4L
 33         bool
 34         depends on ISDN_I4L='y'||(ISDN_I4L='m'&&ISDN_DRV_GIGASET='m')
 35         default !GIGASET_CAPI
 36 
 37 config GIGASET_DUMMYLL
 38         bool
 39         default !GIGASET_CAPI&&!GIGASET_I4L
 40 
 41 config GIGASET_BASE
 42         tristate "Gigaset base station support"
 43         depends on USB
 44         help
 45           Say M here if you want to use the USB interface of the Gigaset
 46           base for connection to your system.
 47           This will build a module called "bas_gigaset".
 48 
 49 config GIGASET_M105
 50         tristate "Gigaset M105 support"
 51         depends on USB
 52         help
 53           Say M here if you want to connect to the Gigaset base via DECT
 54           using a Gigaset M105 (Sinus 45 Data 2) USB DECT device.
 55           This will build a module called "usb_gigaset".
 56 
 57 config GIGASET_M101
 58         tristate "Gigaset M101 support"
 59         help
 60           Say M here if you want to connect to the Gigaset base via DECT
 61           using a Gigaset M101 (Sinus 45 Data 1) RS232 DECT device.
 62           This will build a module called "ser_gigaset".
 63 
 64 config GIGASET_DEBUG
 65         bool "Gigaset debugging"
 66         help
 67           This enables debugging code in the Gigaset drivers.
 68           If in doubt, say yes.
 69 
 70 endif # ISDN_DRV_GIGASET

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us