Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/drivers/input/serio/Kconfig

  1 #
  2 # Input core configuration
  3 #
  4 config SERIO
  5         tristate "Serial I/O support"
  6         default y
  7         help
  8           Say Yes here if you have any input device that uses serial I/O to
  9           communicate with the system. This includes the
 10                         * standard AT keyboard and PS/2 mouse *
 11           as well as serial mice, Sun keyboards, some joysticks and 6dof
 12           devices and more.
 13 
 14           If unsure, say Y.
 15 
 16           To compile this driver as a module, choose M here: the
 17           module will be called serio.
 18 
 19 config ARCH_MIGHT_HAVE_PC_SERIO
 20         bool
 21         help
 22           Select this config option from the architecture Kconfig if
 23           the architecture might use a PC serio device (i8042) to
 24           communicate with keyboard, mouse, etc.
 25 
 26 if SERIO
 27 
 28 config SERIO_I8042
 29         tristate "i8042 PC Keyboard controller"
 30         default y
 31         depends on ARCH_MIGHT_HAVE_PC_SERIO
 32         help
 33           i8042 is the chip over which the standard AT keyboard and PS/2
 34           mouse are connected to the computer. If you use these devices,
 35           you'll need to say Y here.
 36 
 37           If unsure, say Y.
 38 
 39           To compile this driver as a module, choose M here: the
 40           module will be called i8042.
 41 
 42 config SERIO_SERPORT
 43         tristate "Serial port line discipline"
 44         default y
 45         depends on TTY
 46         help
 47           Say Y here if you plan to use an input device (mouse, joystick,
 48           tablet, 6dof) that communicates over the RS232 serial (COM) port.
 49 
 50           More information is available: <file:Documentation/input/input.txt>
 51 
 52           If unsure, say Y.
 53 
 54           To compile this driver as a module, choose M here: the
 55           module will be called serport.
 56 
 57 config SERIO_CT82C710
 58         tristate "ct82c710 Aux port controller"
 59         depends on X86
 60         help
 61           Say Y here if you have a Texas Instruments TravelMate notebook
 62           equipped with the ct82c710 chip and want to use a mouse connected
 63           to the "QuickPort".
 64 
 65           If unsure, say N.
 66 
 67           To compile this driver as a module, choose M here: the
 68           module will be called ct82c710.
 69 
 70 config SERIO_Q40KBD
 71         tristate "Q40 keyboard controller"
 72         depends on Q40
 73 
 74 config SERIO_PARKBD
 75         tristate "Parallel port keyboard adapter"
 76         depends on PARPORT
 77         help
 78           Say Y here if you built a simple parallel port adapter to attach
 79           an additional AT keyboard, XT keyboard or PS/2 mouse.
 80 
 81           More information is available: <file:Documentation/input/input.txt>
 82 
 83           If unsure, say N.
 84 
 85           To compile this driver as a module, choose M here: the
 86           module will be called parkbd.
 87 
 88 config SERIO_RPCKBD
 89         tristate "Acorn RiscPC keyboard controller"
 90         depends on ARCH_ACORN
 91         default y
 92         help
 93           Say Y here if you have the Acorn RiscPC and want to use an AT
 94           keyboard connected to its keyboard controller.
 95 
 96           To compile this driver as a module, choose M here: the
 97           module will be called rpckbd.
 98 
 99 config SERIO_AT32PSIF
100         tristate "AVR32 PSIF PS/2 keyboard and mouse controller"
101         depends on AVR32
102         help
103           Say Y here if you want to use the PSIF peripheral on AVR32 devices
104           and connect a PS/2 keyboard and/or mouse to it.
105 
106           To compile this driver as a module, choose M here: the module will
107           be called at32psif.
108 
109 config SERIO_AMBAKMI
110         tristate "AMBA KMI keyboard controller"
111         depends on ARM_AMBA
112 
113 config SERIO_SA1111
114         tristate "Intel SA1111 keyboard controller"
115         depends on SA1111
116 
117 config SERIO_GSCPS2
118         tristate "HP GSC PS/2 keyboard and PS/2 mouse controller"
119         depends on GSC
120         default y
121         help
122           This driver provides support for the PS/2 ports on PA-RISC machines
123           over which HP PS/2 keyboards and PS/2 mice may be connected.
124           If you use these devices, you'll need to say Y here.
125 
126           It's safe to enable this driver, so if unsure, say Y.
127 
128           To compile this driver as a module, choose M here: the
129           module will be called gscps2.
130 
131 config HP_SDC
132         tristate "HP System Device Controller i8042 Support"
133         depends on (GSC || HP300) && SERIO
134         default y
135         help
136           This option enables support for the "System Device
137           Controller", an i8042 carrying microcode to manage a
138           few miscellaneous devices on some Hewlett Packard systems.
139           The SDC itself contains a 10ms resolution timer/clock capable
140           of delivering interrupts on a periodic and one-shot basis.
141           The SDC may also be connected to a battery-backed real-time
142           clock, a basic audio waveform generator, and an HP-HIL Master
143           Link Controller serving up to seven input devices.
144 
145           By itself this option is rather useless, but enabling it will
146           enable selection of drivers for the abovementioned devices.
147           It is, however, incompatible with the old, reliable HIL keyboard
148           driver, and the new HIL driver is experimental, so if you plan
149           to use a HIL keyboard as your primary keyboard, you may wish
150           to keep using that driver until the new HIL drivers have had
151           more testing.
152 
153 config HIL_MLC
154         tristate "HIL MLC Support (needed for HIL input devices)"
155         depends on HP_SDC
156 
157 config SERIO_PCIPS2
158         tristate "PCI PS/2 keyboard and PS/2 mouse controller"
159         depends on PCI
160         help
161           Say Y here if you have a Mobility Docking station with PS/2
162           keyboard and mice ports.
163 
164           To compile this driver as a module, choose M here: the
165           module will be called pcips2.
166 
167 config SERIO_MACEPS2
168         tristate "SGI O2 MACE PS/2 controller"
169         depends on SGI_IP32
170         help
171           Say Y here if you have SGI O2 workstation and want to use its
172           PS/2 ports.
173 
174           To compile this driver as a module, choose M here: the
175           module will be called maceps2.
176 
177 config SERIO_LIBPS2
178         tristate "PS/2 driver library"
179         depends on SERIO_I8042 || SERIO_I8042=n
180         help
181           Say Y here if you are using a driver for device connected
182           to a PS/2 port, such as PS/2 mouse or standard AT keyboard.
183 
184           To compile this driver as a module, choose M here: the
185           module will be called libps2.
186 
187 config SERIO_RAW
188         tristate "Raw access to serio ports"
189         help
190           Say Y here if you want to have raw access to serio ports, such as
191           AUX ports on i8042 keyboard controller. Each serio port that is
192           bound to this driver will be accessible via a char device with
193           major 10 and dynamically allocated minor. The driver will try
194           allocating minor 1 (that historically corresponds to /dev/psaux)
195           first. To bind this driver to a serio port use sysfs interface:
196 
197               echo -n "serio_raw" > /sys/bus/serio/devices/serioX/drvctl
198 
199           To compile this driver as a module, choose M here: the
200           module will be called serio_raw.
201 
202 config SERIO_XILINX_XPS_PS2
203         tristate "Xilinx XPS PS/2 Controller Support"
204         depends on PPC || MICROBLAZE
205         help
206           This driver supports XPS PS/2 IP from the Xilinx EDK on
207           PowerPC platform.
208 
209           To compile this driver as a module, choose M here: the
210           module will be called xilinx_ps2.
211 
212 config SERIO_ALTERA_PS2
213         tristate "Altera UP PS/2 controller"
214         depends on HAS_IOMEM
215         help
216           Say Y here if you have Altera University Program PS/2 ports.
217 
218           To compile this driver as a module, choose M here: the
219           module will be called altera_ps2.
220 
221 config SERIO_AMS_DELTA
222         tristate "Amstrad Delta (E3) mailboard support"
223         depends on MACH_AMS_DELTA
224         default y
225         ---help---
226           Say Y here if you have an E3 and want to use its mailboard,
227           or any standard AT keyboard connected to the mailboard port.
228 
229           When used for the E3 mailboard, a non-standard key table
230           must be loaded from userspace, possibly using udev extras
231           provided keymap helper utility.
232 
233           To compile this driver as a module, choose M here;
234           the module will be called ams_delta_serio.
235 
236 config SERIO_PS2MULT
237         tristate "TQC PS/2 multiplexer"
238         help
239           Say Y here if you have the PS/2 line multiplexer like the one
240           present on TQC boards.
241 
242           To compile this driver as a module, choose M here: the
243           module will be called ps2mult.
244 
245 config SERIO_ARC_PS2
246         tristate "ARC PS/2 support"
247         help
248           Say Y here if you have an ARC FPGA platform with a PS/2
249           controller in it.
250 
251           To compile this driver as a module, choose M here; the module
252           will be called arc_ps2.
253 
254 config SERIO_APBPS2
255         tristate "GRLIB APBPS2 PS/2 keyboard/mouse controller"
256         depends on OF
257         help
258           Say Y here if you want support for GRLIB APBPS2 peripherals used
259           to connect to PS/2 keyboard and/or mouse.
260 
261           To compile this driver as a module, choose M here: the module will
262           be called apbps2.
263 
264 config SERIO_OLPC_APSP
265         tristate "OLPC AP-SP input support"
266         depends on OF
267         help
268           Say Y here if you want support for the keyboard and touchpad included
269           in the OLPC XO-1.75 and XO-4 laptops.
270 
271           To compile this driver as a module, choose M here: the module will
272           be called olpc_apsp.
273 
274 config HYPERV_KEYBOARD
275         tristate "Microsoft Synthetic Keyboard driver"
276         depends on HYPERV
277         default HYPERV
278         help
279           Select this option to enable the Hyper-V Keyboard driver.
280 
281           To compile this driver as a module, choose M here: the module will
282           be called hyperv_keyboard.
283 
284 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us