Version:  2.0.40 2.2.26 2.4.37 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

Linux/drivers/iio/humidity/Kconfig

  1 #
  2 # humidity sensor drivers
  3 #
  4 menu "Humidity sensors"
  5 
  6 config AM2315
  7     tristate "Aosong AM2315 relative humidity and temperature sensor"
  8     depends on I2C
  9     select IIO_BUFFER
 10     select IIO_TRIGGERED_BUFFER
 11     help
 12       If you say yes here you get support for the Aosong AM2315
 13       relative humidity and ambient temperature sensor.
 14 
 15       This driver can also be built as a module. If so, the module will
 16       be called am2315.
 17 
 18 config DHT11
 19         tristate "DHT11 (and compatible sensors) driver"
 20         depends on GPIOLIB || COMPILE_TEST
 21         help
 22           This driver supports reading data via a single interrupt
 23           generating GPIO line. Currently tested are DHT11 and DHT22.
 24           Other sensors should work as well as long as they speak the
 25           same protocol.
 26 
 27 config HDC100X
 28         tristate "TI HDC100x relative humidity and temperature sensor"
 29         depends on I2C
 30         help
 31          Say yes here to build support for the TI HDC100x series of
 32          relative humidity and temperature sensors.
 33 
 34          To compile this driver as a module, choose M here: the module
 35          will be called hdc100x.
 36 
 37 config HTU21
 38         tristate "Measurement Specialties HTU21 humidity & temperature sensor"
 39         depends on I2C
 40         select IIO_MS_SENSORS_I2C
 41         help
 42           If you say yes here you get support for the Measurement Specialties
 43           HTU21 humidity and temperature sensor.
 44           This driver is also used for MS8607 temperature, pressure & humidity
 45           sensor
 46 
 47           This driver can also be built as a module. If so, the module will
 48           be called htu21.
 49 
 50 config SI7005
 51         tristate "SI7005 relative humidity and temperature sensor"
 52         depends on I2C
 53         help
 54           Say yes here to build support for the Silabs Si7005 relative
 55           humidity and temperature sensor.
 56 
 57           To compile this driver as a module, choose M here: the module
 58           will be called si7005. This driver also
 59           supports Hoperf TH02 Humidity and Temperature Sensor.
 60 
 61 config SI7020
 62         tristate "Si7013/20/21 Relative Humidity and Temperature Sensors"
 63         depends on I2C
 64         help
 65           Say yes here to build support for the Silicon Labs Si7013/20/21
 66           Relative Humidity and Temperature Sensors. This driver also
 67           supports Hoperf TH06 Humidity and Temperature Sensor.
 68 
 69           To compile this driver as a module, choose M here: the module
 70           will be called si7020.
 71 
 72 endmenu

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us