Version:  2.0.40 2.2.26 2.4.37 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1

Linux/drivers/iio/Kconfig

  1 #
  2 # Industrial I/O subsystem configuration
  3 #
  4 
  5 menuconfig IIO
  6         tristate "Industrial I/O support"
  7         select ANON_INODES
  8         help
  9           The industrial I/O subsystem provides a unified framework for
 10           drivers for many different types of embedded sensors using a
 11           number of different physical interfaces (i2c, spi, etc).
 12 
 13 if IIO
 14 
 15 config IIO_BUFFER
 16         bool "Enable buffer support within IIO"
 17         help
 18           Provide core support for various buffer based data
 19           acquisition methods.
 20 
 21 if IIO_BUFFER
 22 
 23 config IIO_BUFFER_CB
 24         bool "IIO callback buffer used for push in-kernel interfaces"
 25         help
 26           Should be selected by any drivers that do in-kernel push
 27           usage.  That is, those where the data is pushed to the consumer.
 28 
 29 config IIO_KFIFO_BUF
 30         tristate "Industrial I/O buffering based on kfifo"
 31         help
 32           A simple fifo based on kfifo.  Note that this currently provides
 33           no buffer events so it is up to userspace to work out how
 34           often to read from the buffer.
 35 
 36 config IIO_TRIGGERED_BUFFER
 37         tristate
 38         select IIO_TRIGGER
 39         select IIO_KFIFO_BUF
 40         help
 41           Provides helper functions for setting up triggered buffers.
 42 
 43 endif # IIO_BUFFER
 44 
 45 config IIO_TRIGGER
 46         bool "Enable triggered sampling support"
 47         help
 48           Provides IIO core support for triggers.  Currently these
 49           are used to initialize capture of samples to push into
 50           buffers.  The triggers are effectively a 'capture
 51           data now' interrupt.
 52 
 53 config IIO_CONSUMERS_PER_TRIGGER
 54        int "Maximum number of consumers per trigger"
 55        depends on IIO_TRIGGER
 56        default "2"
 57        help
 58         This value controls the maximum number of consumers that a
 59         given trigger may handle. Default is 2.
 60 
 61 source "drivers/iio/accel/Kconfig"
 62 source "drivers/iio/adc/Kconfig"
 63 source "drivers/iio/amplifiers/Kconfig"
 64 source "drivers/iio/common/Kconfig"
 65 source "drivers/iio/dac/Kconfig"
 66 source "drivers/iio/frequency/Kconfig"
 67 source "drivers/iio/gyro/Kconfig"
 68 source "drivers/iio/humidity/Kconfig"
 69 source "drivers/iio/imu/Kconfig"
 70 source "drivers/iio/light/Kconfig"
 71 source "drivers/iio/magnetometer/Kconfig"
 72 source "drivers/iio/orientation/Kconfig"
 73 if IIO_TRIGGER
 74    source "drivers/iio/trigger/Kconfig"
 75 endif #IIO_TRIGGER
 76 source "drivers/iio/pressure/Kconfig"
 77 source "drivers/iio/proximity/Kconfig"
 78 source "drivers/iio/temperature/Kconfig"
 79 
 80 endif # IIO

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us