Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/i2c/busses/i2c-ali1563.c

  1 /**
  2  *      i2c-ali1563.c - i2c driver for the ALi 1563 Southbridge
  3  *
  4  *      Copyright (C) 2004 Patrick Mochel
  5  *                    2005 Rudolf Marek <r.marek@assembler.cz>
  6  *
  7  *      The 1563 southbridge is deceptively similar to the 1533, with a
  8  *      few notable exceptions. One of those happens to be the fact they
  9  *      upgraded the i2c core to be 2.0 compliant, and happens to be almost
 10  *      identical to the i2c controller found in the Intel 801 south
 11  *      bridges.
 12  *
 13  *      This driver is based on a mix of the 15x3, 1535, and i801 drivers,
 14  *      with a little help from the ALi 1563 spec.
 15  *
 16  *      This file is released under the GPLv2
 17  */
 18 
 19 #include <linux/module.h>
 20 #include <linux/delay.h>
 21 #include <linux/i2c.h>
 22 #include <linux/pci.h>
 23 #include <linux/acpi.h>
 24 
 25 #define ALI1563_MAX_TIMEOUT     500
 26 #define ALI1563_SMBBA           0x80
 27 #define ALI1563_SMB_IOEN        1
 28 #define ALI1563_SMB_HOSTEN      2
 29 #define ALI1563_SMB_IOSIZE      16
 30 
 31 #define SMB_HST_STS     (ali1563_smba + 0)
 32 #define SMB_HST_CNTL1   (ali1563_smba + 1)
 33 #define SMB_HST_CNTL2   (ali1563_smba + 2)
 34 #define SMB_HST_CMD     (ali1563_smba + 3)
 35 #define SMB_HST_ADD     (ali1563_smba + 4)
 36 #define SMB_HST_DAT0    (ali1563_smba + 5)
 37 #define SMB_HST_DAT1    (ali1563_smba + 6)
 38 #define SMB_BLK_DAT     (ali1563_smba + 7)
 39 
 40 #define HST_STS_BUSY    0x01
 41 #define HST_STS_INTR    0x02
 42 #define HST_STS_DEVERR  0x04
 43 #define HST_STS_BUSERR  0x08
 44 #define HST_STS_FAIL    0x10
 45 #define HST_STS_DONE    0x80
 46 #define HST_STS_BAD     0x1c
 47 
 48 
 49 #define HST_CNTL1_TIMEOUT       0x80
 50 #define HST_CNTL1_LAST          0x40
 51 
 52 #define HST_CNTL2_KILL          0x04
 53 #define HST_CNTL2_START         0x40
 54 #define HST_CNTL2_QUICK         0x00
 55 #define HST_CNTL2_BYTE          0x01
 56 #define HST_CNTL2_BYTE_DATA     0x02
 57 #define HST_CNTL2_WORD_DATA     0x03
 58 #define HST_CNTL2_BLOCK         0x05
 59 
 60 
 61 #define HST_CNTL2_SIZEMASK      0x38
 62 
 63 static struct pci_driver ali1563_pci_driver;
 64 static unsigned short ali1563_smba;
 65 
 66 static int ali1563_transaction(struct i2c_adapter * a, int size)
 67 {
 68         u32 data;
 69         int timeout;
 70         int status = -EIO;
 71 
 72         dev_dbg(&a->dev, "Transaction (pre): STS=%02x, CNTL1=%02x, "
 73                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
 74                 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
 75                 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
 76                 inb_p(SMB_HST_DAT1));
 77 
 78         data = inb_p(SMB_HST_STS);
 79         if (data & HST_STS_BAD) {
 80                 dev_err(&a->dev, "ali1563: Trying to reset busy device\n");
 81                 outb_p(data | HST_STS_BAD,SMB_HST_STS);
 82                 data = inb_p(SMB_HST_STS);
 83                 if (data & HST_STS_BAD)
 84                         return -EBUSY;
 85         }
 86         outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
 87 
 88         timeout = ALI1563_MAX_TIMEOUT;
 89         do {
 90                 msleep(1);
 91         } while (((data = inb_p(SMB_HST_STS)) & HST_STS_BUSY) && --timeout);
 92 
 93         dev_dbg(&a->dev, "Transaction (post): STS=%02x, CNTL1=%02x, "
 94                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
 95                 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
 96                 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
 97                 inb_p(SMB_HST_DAT1));
 98 
 99         if (timeout && !(data & HST_STS_BAD))
100                 return 0;
101 
102         if (!timeout) {
103                 dev_err(&a->dev, "Timeout - Trying to KILL transaction!\n");
104                 /* Issue 'kill' to host controller */
105                 outb_p(HST_CNTL2_KILL,SMB_HST_CNTL2);
106                 data = inb_p(SMB_HST_STS);
107                 status = -ETIMEDOUT;
108         }
109 
110         /* device error - no response, ignore the autodetection case */
111         if (data & HST_STS_DEVERR) {
112                 if (size != HST_CNTL2_QUICK)
113                         dev_err(&a->dev, "Device error!\n");
114                 status = -ENXIO;
115         }
116         /* bus collision */
117         if (data & HST_STS_BUSERR) {
118                 dev_err(&a->dev, "Bus collision!\n");
119                 /* Issue timeout, hoping it helps */
120                 outb_p(HST_CNTL1_TIMEOUT,SMB_HST_CNTL1);
121         }
122 
123         if (data & HST_STS_FAIL) {
124                 dev_err(&a->dev, "Cleaning fail after KILL!\n");
125                 outb_p(0x0,SMB_HST_CNTL2);
126         }
127 
128         return status;
129 }
130 
131 static int ali1563_block_start(struct i2c_adapter * a)
132 {
133         u32 data;
134         int timeout;
135         int status = -EIO;
136 
137         dev_dbg(&a->dev, "Block (pre): STS=%02x, CNTL1=%02x, "
138                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
139                 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
140                 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
141                 inb_p(SMB_HST_DAT1));
142 
143         data = inb_p(SMB_HST_STS);
144         if (data & HST_STS_BAD) {
145                 dev_warn(&a->dev,"ali1563: Trying to reset busy device\n");
146                 outb_p(data | HST_STS_BAD,SMB_HST_STS);
147                 data = inb_p(SMB_HST_STS);
148                 if (data & HST_STS_BAD)
149                         return -EBUSY;
150         }
151 
152         /* Clear byte-ready bit */
153         outb_p(data | HST_STS_DONE, SMB_HST_STS);
154 
155         /* Start transaction and wait for byte-ready bit to be set */
156         outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_START, SMB_HST_CNTL2);
157 
158         timeout = ALI1563_MAX_TIMEOUT;
159         do {
160                 msleep(1);
161         } while (!((data = inb_p(SMB_HST_STS)) & HST_STS_DONE) && --timeout);
162 
163         dev_dbg(&a->dev, "Block (post): STS=%02x, CNTL1=%02x, "
164                 "CNTL2=%02x, CMD=%02x, ADD=%02x, DAT0=%02x, DAT1=%02x\n",
165                 inb_p(SMB_HST_STS), inb_p(SMB_HST_CNTL1), inb_p(SMB_HST_CNTL2),
166                 inb_p(SMB_HST_CMD), inb_p(SMB_HST_ADD), inb_p(SMB_HST_DAT0),
167                 inb_p(SMB_HST_DAT1));
168 
169         if (timeout && !(data & HST_STS_BAD))
170                 return 0;
171 
172         if (timeout == 0)
173                 status = -ETIMEDOUT;
174 
175         if (data & HST_STS_DEVERR)
176                 status = -ENXIO;
177 
178         dev_err(&a->dev, "SMBus Error: %s%s%s%s%s\n",
179                 timeout ? "" : "Timeout ",
180                 data & HST_STS_FAIL ? "Transaction Failed " : "",
181                 data & HST_STS_BUSERR ? "No response or Bus Collision " : "",
182                 data & HST_STS_DEVERR ? "Device Error " : "",
183                 !(data & HST_STS_DONE) ? "Transaction Never Finished " : "");
184         return status;
185 }
186 
187 static int ali1563_block(struct i2c_adapter * a, union i2c_smbus_data * data, u8 rw)
188 {
189         int i, len;
190         int error = 0;
191 
192         /* Do we need this? */
193         outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
194 
195         if (rw == I2C_SMBUS_WRITE) {
196                 len = data->block[0];
197                 if (len < 1)
198                         len = 1;
199                 else if (len > 32)
200                         len = 32;
201                 outb_p(len,SMB_HST_DAT0);
202                 outb_p(data->block[1],SMB_BLK_DAT);
203         } else
204                 len = 32;
205 
206         outb_p(inb_p(SMB_HST_CNTL2) | HST_CNTL2_BLOCK, SMB_HST_CNTL2);
207 
208         for (i = 0; i < len; i++) {
209                 if (rw == I2C_SMBUS_WRITE) {
210                         outb_p(data->block[i + 1], SMB_BLK_DAT);
211                         if ((error = ali1563_block_start(a)))
212                                 break;
213                 } else {
214                         if ((error = ali1563_block_start(a)))
215                                 break;
216                         if (i == 0) {
217                                 len = inb_p(SMB_HST_DAT0);
218                                 if (len < 1)
219                                         len = 1;
220                                 else if (len > 32)
221                                         len = 32;
222                         }
223                         data->block[i+1] = inb_p(SMB_BLK_DAT);
224                 }
225         }
226         /* Do we need this? */
227         outb_p(HST_CNTL1_LAST,SMB_HST_CNTL1);
228         return error;
229 }
230 
231 static s32 ali1563_access(struct i2c_adapter * a, u16 addr,
232                           unsigned short flags, char rw, u8 cmd,
233                           int size, union i2c_smbus_data * data)
234 {
235         int error = 0;
236         int timeout;
237         u32 reg;
238 
239         for (timeout = ALI1563_MAX_TIMEOUT; timeout; timeout--) {
240                 if (!(reg = inb_p(SMB_HST_STS) & HST_STS_BUSY))
241                         break;
242         }
243         if (!timeout)
244                 dev_warn(&a->dev,"SMBus not idle. HST_STS = %02x\n",reg);
245         outb_p(0xff,SMB_HST_STS);
246 
247         /* Map the size to what the chip understands */
248         switch (size) {
249         case I2C_SMBUS_QUICK:
250                 size = HST_CNTL2_QUICK;
251                 break;
252         case I2C_SMBUS_BYTE:
253                 size = HST_CNTL2_BYTE;
254                 break;
255         case I2C_SMBUS_BYTE_DATA:
256                 size = HST_CNTL2_BYTE_DATA;
257                 break;
258         case I2C_SMBUS_WORD_DATA:
259                 size = HST_CNTL2_WORD_DATA;
260                 break;
261         case I2C_SMBUS_BLOCK_DATA:
262                 size = HST_CNTL2_BLOCK;
263                 break;
264         default:
265                 dev_warn(&a->dev, "Unsupported transaction %d\n", size);
266                 error = -EOPNOTSUPP;
267                 goto Done;
268         }
269 
270         outb_p(((addr & 0x7f) << 1) | (rw & 0x01), SMB_HST_ADD);
271         outb_p((inb_p(SMB_HST_CNTL2) & ~HST_CNTL2_SIZEMASK) | (size << 3), SMB_HST_CNTL2);
272 
273         /* Write the command register */
274 
275         switch(size) {
276         case HST_CNTL2_BYTE:
277                 if (rw== I2C_SMBUS_WRITE)
278                         /* Beware it uses DAT0 register and not CMD! */
279                         outb_p(cmd, SMB_HST_DAT0);
280                 break;
281         case HST_CNTL2_BYTE_DATA:
282                 outb_p(cmd, SMB_HST_CMD);
283                 if (rw == I2C_SMBUS_WRITE)
284                         outb_p(data->byte, SMB_HST_DAT0);
285                 break;
286         case HST_CNTL2_WORD_DATA:
287                 outb_p(cmd, SMB_HST_CMD);
288                 if (rw == I2C_SMBUS_WRITE) {
289                         outb_p(data->word & 0xff, SMB_HST_DAT0);
290                         outb_p((data->word & 0xff00) >> 8, SMB_HST_DAT1);
291                 }
292                 break;
293         case HST_CNTL2_BLOCK:
294                 outb_p(cmd, SMB_HST_CMD);
295                 error = ali1563_block(a,data,rw);
296                 goto Done;
297         }
298 
299         if ((error = ali1563_transaction(a, size)))
300                 goto Done;
301 
302         if ((rw == I2C_SMBUS_WRITE) || (size == HST_CNTL2_QUICK))
303                 goto Done;
304 
305         switch (size) {
306         case HST_CNTL2_BYTE:    /* Result put in SMBHSTDAT0 */
307                 data->byte = inb_p(SMB_HST_DAT0);
308                 break;
309         case HST_CNTL2_BYTE_DATA:
310                 data->byte = inb_p(SMB_HST_DAT0);
311                 break;
312         case HST_CNTL2_WORD_DATA:
313                 data->word = inb_p(SMB_HST_DAT0) + (inb_p(SMB_HST_DAT1) << 8);
314                 break;
315         }
316 Done:
317         return error;
318 }
319 
320 static u32 ali1563_func(struct i2c_adapter * a)
321 {
322         return I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE |
323             I2C_FUNC_SMBUS_BYTE_DATA | I2C_FUNC_SMBUS_WORD_DATA |
324             I2C_FUNC_SMBUS_BLOCK_DATA;
325 }
326 
327 
328 static int ali1563_setup(struct pci_dev *dev)
329 {
330         u16 ctrl;
331 
332         pci_read_config_word(dev,ALI1563_SMBBA,&ctrl);
333 
334         /* SMB I/O Base in high 12 bits and must be aligned with the
335          * size of the I/O space. */
336         ali1563_smba = ctrl & ~(ALI1563_SMB_IOSIZE - 1);
337         if (!ali1563_smba) {
338                 dev_warn(&dev->dev,"ali1563_smba Uninitialized\n");
339                 goto Err;
340         }
341 
342         /* Check if device is enabled */
343         if (!(ctrl & ALI1563_SMB_HOSTEN)) {
344                 dev_warn(&dev->dev, "Host Controller not enabled\n");
345                 goto Err;
346         }
347         if (!(ctrl & ALI1563_SMB_IOEN)) {
348                 dev_warn(&dev->dev, "I/O space not enabled, trying manually\n");
349                 pci_write_config_word(dev, ALI1563_SMBBA,
350                                       ctrl | ALI1563_SMB_IOEN);
351                 pci_read_config_word(dev, ALI1563_SMBBA, &ctrl);
352                 if (!(ctrl & ALI1563_SMB_IOEN)) {
353                         dev_err(&dev->dev, "I/O space still not enabled, "
354                                 "giving up\n");
355                         goto Err;
356                 }
357         }
358 
359         if (acpi_check_region(ali1563_smba, ALI1563_SMB_IOSIZE,
360                               ali1563_pci_driver.name))
361                 goto Err;
362 
363         if (!request_region(ali1563_smba, ALI1563_SMB_IOSIZE,
364                             ali1563_pci_driver.name)) {
365                 dev_err(&dev->dev, "Could not allocate I/O space at 0x%04x\n",
366                         ali1563_smba);
367                 goto Err;
368         }
369         dev_info(&dev->dev, "Found ALi1563 SMBus at 0x%04x\n", ali1563_smba);
370 
371         return 0;
372 Err:
373         return -ENODEV;
374 }
375 
376 static void ali1563_shutdown(struct pci_dev *dev)
377 {
378         release_region(ali1563_smba,ALI1563_SMB_IOSIZE);
379 }
380 
381 static const struct i2c_algorithm ali1563_algorithm = {
382         .smbus_xfer     = ali1563_access,
383         .functionality  = ali1563_func,
384 };
385 
386 static struct i2c_adapter ali1563_adapter = {
387         .owner  = THIS_MODULE,
388         .class  = I2C_CLASS_HWMON | I2C_CLASS_SPD,
389         .algo   = &ali1563_algorithm,
390 };
391 
392 static int ali1563_probe(struct pci_dev *dev,
393                          const struct pci_device_id *id_table)
394 {
395         int error;
396 
397         if ((error = ali1563_setup(dev)))
398                 goto exit;
399         ali1563_adapter.dev.parent = &dev->dev;
400         snprintf(ali1563_adapter.name, sizeof(ali1563_adapter.name),
401                  "SMBus ALi 1563 Adapter @ %04x", ali1563_smba);
402         if ((error = i2c_add_adapter(&ali1563_adapter)))
403                 goto exit_shutdown;
404         return 0;
405 
406 exit_shutdown:
407         ali1563_shutdown(dev);
408 exit:
409         dev_warn(&dev->dev, "ALi1563 SMBus probe failed (%d)\n", error);
410         return error;
411 }
412 
413 static void ali1563_remove(struct pci_dev *dev)
414 {
415         i2c_del_adapter(&ali1563_adapter);
416         ali1563_shutdown(dev);
417 }
418 
419 static const struct pci_device_id ali1563_id_table[] = {
420         { PCI_DEVICE(PCI_VENDOR_ID_AL, PCI_DEVICE_ID_AL_M1563) },
421         {},
422 };
423 
424 MODULE_DEVICE_TABLE (pci, ali1563_id_table);
425 
426 static struct pci_driver ali1563_pci_driver = {
427         .name           = "ali1563_smbus",
428         .id_table       = ali1563_id_table,
429         .probe          = ali1563_probe,
430         .remove         = ali1563_remove,
431 };
432 
433 module_pci_driver(ali1563_pci_driver);
434 
435 MODULE_LICENSE("GPL");
436 

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us