Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/hwmon/pmbus/Kconfig

  1 #
  2 # PMBus chip drivers configuration
  3 #
  4 
  5 menuconfig PMBUS
  6         tristate "PMBus support"
  7         depends on I2C
  8         default n
  9         help
 10           Say yes here if you want to enable PMBus support.
 11 
 12           This driver can also be built as a module. If so, the module will
 13           be called pmbus_core.
 14 
 15 if PMBUS
 16 
 17 config SENSORS_PMBUS
 18         tristate "Generic PMBus devices"
 19         default y
 20         help
 21           If you say yes here you get hardware monitoring support for generic
 22           PMBus devices, including but not limited to ADP4000, BMR453, BMR454,
 23           MDT040, NCP4200, NCP4208, PDT003, PDT006, PDT012, UDT020, TPS40400,
 24           and TPS40422.
 25 
 26           This driver can also be built as a module. If so, the module will
 27           be called pmbus.
 28 
 29 config SENSORS_ADM1275
 30         tristate "Analog Devices ADM1275 and compatibles"
 31         default n
 32         help
 33           If you say yes here you get hardware monitoring support for Analog
 34           Devices ADM1075, ADM1275, and ADM1276 Hot-Swap Controller and Digital
 35           Power Monitors.
 36 
 37           This driver can also be built as a module. If so, the module will
 38           be called adm1275.
 39 
 40 config SENSORS_LM25066
 41         tristate "National Semiconductor LM25066 and compatibles"
 42         default n
 43         help
 44           If you say yes here you get hardware monitoring support for National
 45           Semiconductor LM25056, LM25066, LM5064, and LM5066.
 46 
 47           This driver can also be built as a module. If so, the module will
 48           be called lm25066.
 49 
 50 config SENSORS_LTC2978
 51         tristate "Linear Technologies LTC2974, LTC2978, LTC3880, and LTC3883"
 52         default n
 53         help
 54           If you say yes here you get hardware monitoring support for Linear
 55           Technology LTC2974, LTC2978, LTC3880, and LTC3883.
 56 
 57           This driver can also be built as a module. If so, the module will
 58           be called ltc2978.
 59 
 60 config SENSORS_MAX16064
 61         tristate "Maxim MAX16064"
 62         default n
 63         help
 64           If you say yes here you get hardware monitoring support for Maxim
 65           MAX16064.
 66 
 67           This driver can also be built as a module. If so, the module will
 68           be called max16064.
 69 
 70 config SENSORS_MAX34440
 71         tristate "Maxim MAX34440 and compatibles"
 72         default n
 73         help
 74           If you say yes here you get hardware monitoring support for Maxim
 75           MAX34440, MAX34441, MAX34446, MAX34460, and MAX34461.
 76 
 77           This driver can also be built as a module. If so, the module will
 78           be called max34440.
 79 
 80 config SENSORS_MAX8688
 81         tristate "Maxim MAX8688"
 82         default n
 83         help
 84           If you say yes here you get hardware monitoring support for Maxim
 85           MAX8688.
 86 
 87           This driver can also be built as a module. If so, the module will
 88           be called max8688.
 89 
 90 config SENSORS_UCD9000
 91         tristate "TI UCD90120, UCD90124, UCD9090, UCD90910"
 92         default n
 93         help
 94           If you say yes here you get hardware monitoring support for TI
 95           UCD90120, UCD90124, UCD9090, UCD90910 Sequencer and System Health
 96           Controllers.
 97 
 98           This driver can also be built as a module. If so, the module will
 99           be called ucd9000.
100 
101 config SENSORS_UCD9200
102         tristate "TI UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, UCD9248"
103         default n
104         help
105           If you say yes here you get hardware monitoring support for TI
106           UCD9220, UCD9222, UCD9224, UCD9240, UCD9244, UCD9246, and UCD9248
107           Digital PWM System Controllers.
108 
109           This driver can also be built as a module. If so, the module will
110           be called ucd9200.
111 
112 config SENSORS_ZL6100
113         tristate "Intersil ZL6100 and compatibles"
114         default n
115         help
116           If you say yes here you get hardware monitoring support for Intersil
117           ZL2004, ZL2005, ZL2006, ZL2008, ZL2105, ZL2106, ZL6100, ZL6105,
118           ZL9101M, and ZL9117M Digital DC/DC Controllers, as well as for
119           Ericsson BMR450, BMR451, BMR462, BMR463, and BMR464.
120 
121           This driver can also be built as a module. If so, the module will
122           be called zl6100.
123 
124 endif # PMBUS

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us