Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/drivers/block/paride/Kconfig

  1 #
  2 # PARIDE configuration
  3 #
  4 # PARIDE doesn't need PARPORT, but if PARPORT is configured as a module,
  5 # PARIDE must also be a module.
  6 # PARIDE only supports PC style parports. Tough for USB or other parports...
  7 
  8 comment "Parallel IDE high-level drivers"
  9         depends on PARIDE
 10 
 11 config PARIDE_PD
 12         tristate "Parallel port IDE disks"
 13         depends on PARIDE
 14         help
 15           This option enables the high-level driver for IDE-type disk devices
 16           connected through a parallel port. If you chose to build PARIDE
 17           support into your kernel, you may answer Y here to build in the
 18           parallel port IDE driver, otherwise you should answer M to build
 19           it as a loadable module. The module will be called pd. You
 20           must also have at least one parallel port protocol driver in your
 21           system. Among the devices supported by this driver are the SyQuest
 22           EZ-135, EZ-230 and SparQ drives, the Avatar Shark and the backpack
 23           hard drives from MicroSolutions.
 24 
 25 config PARIDE_PCD
 26         tristate "Parallel port ATAPI CD-ROMs"
 27         depends on PARIDE
 28         ---help---
 29           This option enables the high-level driver for ATAPI CD-ROM devices
 30           connected through a parallel port. If you chose to build PARIDE
 31           support into your kernel, you may answer Y here to build in the
 32           parallel port ATAPI CD-ROM driver, otherwise you should answer M to
 33           build it as a loadable module. The module will be called pcd. You
 34           must also have at least one parallel port protocol driver in your
 35           system. Among the devices supported by this driver are the
 36           MicroSolutions backpack CD-ROM drives and the Freecom Power CD. If
 37           you have such a CD-ROM drive, you should also say Y or M to "ISO
 38           9660 CD-ROM file system support" below, because that's the file
 39           system used on CD-ROMs.
 40 
 41 config PARIDE_PF
 42         tristate "Parallel port ATAPI disks"
 43         depends on PARIDE
 44         help
 45           This option enables the high-level driver for ATAPI disk devices
 46           connected through a parallel port. If you chose to build PARIDE
 47           support into your kernel, you may answer Y here to build in the
 48           parallel port ATAPI disk driver, otherwise you should answer M
 49           to build it as a loadable module. The module will be called pf.
 50           You must also have at least one parallel port protocol driver in
 51           your system. Among the devices supported by this driver are the
 52           MicroSolutions backpack PD/CD drive and the Imation Superdisk
 53           LS-120 drive.
 54 
 55 config PARIDE_PT
 56         tristate "Parallel port ATAPI tapes"
 57         depends on PARIDE
 58         help
 59           This option enables the high-level driver for ATAPI tape devices
 60           connected through a parallel port. If you chose to build PARIDE
 61           support into your kernel, you may answer Y here to build in the
 62           parallel port ATAPI disk driver, otherwise you should answer M
 63           to build it as a loadable module. The module will be called pt.
 64           You must also have at least one parallel port protocol driver in
 65           your system. Among the devices supported by this driver is the
 66           parallel port version of the HP 5GB drive.
 67 
 68 config PARIDE_PG
 69         tristate "Parallel port generic ATAPI devices"
 70         depends on PARIDE
 71         ---help---
 72           This option enables a special high-level driver for generic ATAPI
 73           devices connected through a parallel port. The driver allows user
 74           programs, such as cdrtools, to send ATAPI commands directly to a
 75           device.
 76 
 77           If you chose to build PARIDE support into your kernel, you may
 78           answer Y here to build in the parallel port generic ATAPI driver,
 79           otherwise you should answer M to build it as a loadable module. The
 80           module will be called pg.
 81 
 82           You must also have at least one parallel port protocol driver in
 83           your system.
 84 
 85           This driver implements an API loosely related to the generic SCSI
 86           driver. See <file:include/linux/pg.h>. for details.
 87 
 88           You can obtain the most recent version of cdrtools from
 89           <ftp://ftp.berlios.de/pub/cdrecord/>. Versions 1.6.1a3 and
 90           later fully support this driver.
 91 
 92 comment "Parallel IDE protocol modules"
 93         depends on PARIDE
 94 
 95 config PARIDE_ATEN
 96         tristate "ATEN EH-100 protocol"
 97         depends on PARIDE
 98         help
 99           This option enables support for the ATEN EH-100 parallel port IDE
100           protocol. This protocol is used in some inexpensive low performance
101           parallel port kits made in Hong Kong. If you chose to build PARIDE
102           support into your kernel, you may answer Y here to build in the
103           protocol driver, otherwise you should answer M to build it as a
104           loadable module. The module will be called aten. You must also
105           have a high-level driver for the type of device that you want to
106           support.
107 
108 config PARIDE_BPCK
109         tristate "MicroSolutions backpack (Series 5) protocol"
110         depends on PARIDE
111         ---help---
112           This option enables support for the Micro Solutions BACKPACK
113           parallel port Series 5 IDE protocol.  (Most BACKPACK drives made
114           before 1999 were Series 5) Series 5 drives will NOT always have the
115           Series noted on the bottom of the drive. Series 6 drivers will.
116 
117           In other words, if your BACKPACK drive doesn't say "Series 6" on the
118           bottom, enable this option.
119 
120           If you chose to build PARIDE support into your kernel, you may
121           answer Y here to build in the protocol driver, otherwise you should
122           answer M to build it as a loadable module.  The module will be
123           called bpck.  You must also have a high-level driver for the type
124           of device that you want to support.
125 
126 config PARIDE_BPCK6
127         tristate "MicroSolutions backpack (Series 6) protocol"
128         depends on PARIDE && !64BIT
129         ---help---
130           This option enables support for the Micro Solutions BACKPACK
131           parallel port Series 6 IDE protocol.  (Most BACKPACK drives made
132           after 1999 were Series 6) Series 6 drives will have the Series noted
133           on the bottom of the drive.  Series 5 drivers don't always have it
134           noted.
135 
136           In other words, if your BACKPACK drive says "Series 6" on the
137           bottom, enable this option.
138 
139           If you chose to build PARIDE support into your kernel, you may
140           answer Y here to build in the protocol driver, otherwise you should
141           answer M to build it as a loadable module.  The module will be
142           called bpck6.  You must also have a high-level driver for the type
143           of device that you want to support.
144 
145 config PARIDE_COMM
146         tristate "DataStor Commuter protocol"
147         depends on PARIDE
148         help
149           This option enables support for the Commuter parallel port IDE
150           protocol from DataStor. If you chose to build PARIDE support
151           into your kernel, you may answer Y here to build in the protocol
152           driver, otherwise you should answer M to build it as a loadable
153           module. The module will be called comm. You must also have
154           a high-level driver for the type of device that you want to support.
155 
156 config PARIDE_DSTR
157         tristate "DataStor EP-2000 protocol"
158         depends on PARIDE
159         help
160           This option enables support for the EP-2000 parallel port IDE
161           protocol from DataStor. If you chose to build PARIDE support
162           into your kernel, you may answer Y here to build in the protocol
163           driver, otherwise you should answer M to build it as a loadable
164           module. The module will be called dstr. You must also have
165           a high-level driver for the type of device that you want to support.
166 
167 config PARIDE_FIT2
168         tristate "FIT TD-2000 protocol"
169         depends on PARIDE
170         help
171           This option enables support for the TD-2000 parallel port IDE
172           protocol from Fidelity International Technology. This is a simple
173           (low speed) adapter that is used in some portable hard drives. If
174           you chose to build PARIDE support into your kernel, you may answer Y
175           here to build in the protocol driver, otherwise you should answer M
176           to build it as a loadable module. The module will be called ktti.
177           You must also have a high-level driver for the type of device that
178           you want to support.
179 
180 config PARIDE_FIT3
181         tristate "FIT TD-3000 protocol"
182         depends on PARIDE
183         help
184           This option enables support for the TD-3000 parallel port IDE
185           protocol from Fidelity International Technology. This protocol is
186           used in newer models of their portable disk, CD-ROM and PD/CD
187           devices. If you chose to build PARIDE support into your kernel, you
188           may answer Y here to build in the protocol driver, otherwise you
189           should answer M to build it as a loadable module. The module will be
190           called fit3. You must also have a high-level driver for the type
191           of device that you want to support.
192 
193 config PARIDE_EPAT
194         tristate "Shuttle EPAT/EPEZ protocol"
195         depends on PARIDE
196         help
197           This option enables support for the EPAT parallel port IDE protocol.
198           EPAT is a parallel port IDE adapter manufactured by Shuttle
199           Technology and widely used in devices from major vendors such as
200           Hewlett-Packard, SyQuest, Imation and Avatar. If you chose to build
201           PARIDE support into your kernel, you may answer Y here to build in
202           the protocol driver, otherwise you should answer M to build it as a
203           loadable module. The module will be called epat. You must also
204           have a high-level driver for the type of device that you want to
205           support.
206 
207 config PARIDE_EPATC8
208         bool "Support c7/c8 chips"
209         depends on PARIDE_EPAT
210         help
211           This option enables support for the newer Shuttle EP1284 (aka c7 and
212           c8) chip. You need this if you are using any recent Imation SuperDisk
213           (LS-120) drive.
214 
215 config PARIDE_EPIA
216         tristate "Shuttle EPIA protocol"
217         depends on PARIDE
218         help
219           This option enables support for the (obsolete) EPIA parallel port
220           IDE protocol from Shuttle Technology. This adapter can still be
221           found in some no-name kits. If you chose to build PARIDE support
222           into your kernel, you may answer Y here to build in the protocol
223           driver, otherwise you should answer M to build it as a loadable
224           module. The module will be called epia. You must also have a
225           high-level driver for the type of device that you want to support.
226 
227 config PARIDE_FRIQ
228         tristate "Freecom IQ ASIC-2 protocol"
229         depends on PARIDE
230         help
231           This option enables support for version 2 of the Freecom IQ parallel
232           port IDE adapter.  This adapter is used by the Maxell Superdisk
233           drive.  If you chose to build PARIDE support into your kernel, you
234           may answer Y here to build in the protocol driver, otherwise you
235           should answer M to build it as a loadable module. The module will be
236           called friq. You must also have a high-level driver for the type
237           of device that you want to support.
238 
239 config PARIDE_FRPW
240         tristate "FreeCom power protocol"
241         depends on PARIDE
242         help
243           This option enables support for the Freecom power parallel port IDE
244           protocol. If you chose to build PARIDE support into your kernel, you
245           may answer Y here to build in the protocol driver, otherwise you
246           should answer M to build it as a loadable module. The module will be
247           called frpw. You must also have a high-level driver for the type
248           of device that you want to support.
249 
250 config PARIDE_KBIC
251         tristate "KingByte KBIC-951A/971A protocols"
252         depends on PARIDE
253         help
254           This option enables support for the KBIC-951A and KBIC-971A parallel
255           port IDE protocols from KingByte Information Corp. KingByte's
256           adapters appear in many no-name portable disk and CD-ROM products,
257           especially in Europe. If you chose to build PARIDE support into your
258           kernel, you may answer Y here to build in the protocol driver,
259           otherwise you should answer M to build it as a loadable module. The
260           module will be called kbic. You must also have a high-level driver
261           for the type of device that you want to support.
262 
263 config PARIDE_KTTI
264         tristate "KT PHd protocol"
265         depends on PARIDE
266         help
267           This option enables support for the "PHd" parallel port IDE protocol
268           from KT Technology. This is a simple (low speed) adapter that is
269           used in some 2.5" portable hard drives. If you chose to build PARIDE
270           support into your kernel, you may answer Y here to build in the
271           protocol driver, otherwise you should answer M to build it as a
272           loadable module. The module will be called ktti. You must also
273           have a high-level driver for the type of device that you want to
274           support.
275 
276 config PARIDE_ON20
277         tristate "OnSpec 90c20 protocol"
278         depends on PARIDE
279         help
280           This option enables support for the (obsolete) 90c20 parallel port
281           IDE protocol from OnSpec (often marketed under the ValuStore brand
282           name). If you chose to build PARIDE support into your kernel, you
283           may answer Y here to build in the protocol driver, otherwise you
284           should answer M to build it as a loadable module. The module will
285           be called on20. You must also have a high-level driver for the
286           type of device that you want to support.
287 
288 config PARIDE_ON26
289         tristate "OnSpec 90c26 protocol"
290         depends on PARIDE
291         help
292           This option enables support for the 90c26 parallel port IDE protocol
293           from OnSpec Electronics (often marketed under the ValuStore brand
294           name). If you chose to build PARIDE support into your kernel, you
295           may answer Y here to build in the protocol driver, otherwise you
296           should answer M to build it as a loadable module. The module will be
297           called on26. You must also have a high-level driver for the type
298           of device that you want to support.
299 
300 #

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us