Version:  2.0.40 2.2.26 2.4.37 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2

Linux/drivers/bcma/Kconfig

  1 config BCMA_POSSIBLE
  2         bool
  3         depends on HAS_IOMEM && HAS_DMA
  4         default y
  5 
  6 menu "Broadcom specific AMBA"
  7         depends on BCMA_POSSIBLE
  8 
  9 config BCMA
 10         tristate "BCMA support"
 11         depends on BCMA_POSSIBLE
 12         help
 13           Bus driver for Broadcom specific Advanced Microcontroller Bus
 14           Architecture.
 15 
 16 # Support for Block-I/O. SELECT this from the driver that needs it.
 17 config BCMA_BLOCKIO
 18         bool
 19         depends on BCMA
 20 
 21 config BCMA_HOST_PCI_POSSIBLE
 22         bool
 23         depends on BCMA && PCI = y
 24         default y
 25 
 26 config BCMA_HOST_PCI
 27         bool "Support for BCMA on PCI-host bus"
 28         depends on BCMA_HOST_PCI_POSSIBLE
 29         select BCMA_DRIVER_PCI
 30         default y
 31 
 32 config BCMA_HOST_SOC
 33         bool "Support for BCMA in a SoC"
 34         depends on BCMA
 35         help
 36           Host interface for a Broadcom AIX bus directly mapped into
 37           the memory. This only works with the Broadcom SoCs from the
 38           BCM47XX line.
 39 
 40           If unsure, say N
 41 
 42 config BCMA_DRIVER_PCI
 43         bool "BCMA Broadcom PCI core driver"
 44         depends on BCMA && PCI
 45         default y
 46         help
 47           BCMA bus may have many versions of PCIe core. This driver
 48           supports:
 49           1) PCIe core working in clientmode
 50           2) PCIe Gen 2 clientmode core
 51 
 52           In general PCIe (Gen 2) clientmode core is required on PCIe
 53           hosted buses. It's responsible for initialization and basic
 54           hardware management.
 55           This driver is also prerequisite for a hostmode PCIe core
 56           support.
 57 
 58 config BCMA_DRIVER_PCI_HOSTMODE
 59         bool "Driver for PCI core working in hostmode"
 60         depends on BCMA && MIPS && BCMA_DRIVER_PCI
 61         help
 62           PCI core hostmode operation (external PCI bus).
 63 
 64 config BCMA_DRIVER_MIPS
 65         bool "BCMA Broadcom MIPS core driver"
 66         depends on BCMA && MIPS
 67         help
 68           Driver for the Broadcom MIPS core attached to Broadcom specific
 69           Advanced Microcontroller Bus.
 70 
 71           If unsure, say N
 72 
 73 config BCMA_SFLASH
 74         bool
 75         depends on BCMA_DRIVER_MIPS
 76         default y
 77 
 78 config BCMA_NFLASH
 79         bool
 80         depends on BCMA_DRIVER_MIPS
 81         default y
 82 
 83 config BCMA_DRIVER_GMAC_CMN
 84         bool "BCMA Broadcom GBIT MAC COMMON core driver"
 85         depends on BCMA
 86         help
 87           Driver for the Broadcom GBIT MAC COMMON core attached to Broadcom
 88           specific Advanced Microcontroller Bus.
 89 
 90           If unsure, say N
 91 
 92 config BCMA_DRIVER_GPIO
 93         bool "BCMA GPIO driver"
 94         depends on BCMA && GPIOLIB
 95         select IRQ_DOMAIN if BCMA_HOST_SOC
 96         help
 97           Driver to provide access to the GPIO pins of the bcma bus.
 98 
 99           If unsure, say N
100 
101 config BCMA_DEBUG
102         bool "BCMA debugging"
103         depends on BCMA
104         help
105           This turns on additional debugging messages.
106 
107           If unsure, say N
108 
109 endmenu

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us