Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/drivers/ata/pata_rz1000.c

  1 /*
  2  *  RZ1000/1001 driver based upon
  3  *
  4  *  linux/drivers/ide/pci/rz1000.c      Version 0.06    January 12, 2003
  5  *  Copyright (C) 1995-1998  Linus Torvalds & author (see below)
  6  *  Principal Author:  mlord@pobox.com (Mark Lord)
  7  *
  8  *  See linux/MAINTAINERS for address of current maintainer.
  9  *
 10  *  This file provides support for disabling the buggy read-ahead
 11  *  mode of the RZ1000 IDE chipset, commonly used on Intel motherboards.
 12  */
 13 
 14 #include <linux/kernel.h>
 15 #include <linux/module.h>
 16 #include <linux/pci.h>
 17 #include <linux/init.h>
 18 #include <linux/blkdev.h>
 19 #include <linux/delay.h>
 20 #include <scsi/scsi_host.h>
 21 #include <linux/libata.h>
 22 
 23 #define DRV_NAME        "pata_rz1000"
 24 #define DRV_VERSION     "0.2.4"
 25 
 26 
 27 /**
 28  *      rz1000_set_mode         -       mode setting function
 29  *      @link: ATA link
 30  *      @unused: returned device on set_mode failure
 31  *
 32  *      Use a non standard set_mode function. We don't want to be tuned. We
 33  *      would prefer to be BIOS generic but for the fact our hardware is
 34  *      whacked out.
 35  */
 36 
 37 static int rz1000_set_mode(struct ata_link *link, struct ata_device **unused)
 38 {
 39         struct ata_device *dev;
 40 
 41         ata_for_each_dev(dev, link, ENABLED) {
 42                 /* We don't really care */
 43                 dev->pio_mode = XFER_PIO_0;
 44                 dev->xfer_mode = XFER_PIO_0;
 45                 dev->xfer_shift = ATA_SHIFT_PIO;
 46                 dev->flags |= ATA_DFLAG_PIO;
 47                 ata_dev_info(dev, "configured for PIO\n");
 48         }
 49         return 0;
 50 }
 51 
 52 
 53 static struct scsi_host_template rz1000_sht = {
 54         ATA_PIO_SHT(DRV_NAME),
 55 };
 56 
 57 static struct ata_port_operations rz1000_port_ops = {
 58         .inherits       = &ata_sff_port_ops,
 59         .cable_detect   = ata_cable_40wire,
 60         .set_mode       = rz1000_set_mode,
 61 };
 62 
 63 static int rz1000_fifo_disable(struct pci_dev *pdev)
 64 {
 65         u16 reg;
 66         /* Be exceptionally paranoid as we must be sure to apply the fix */
 67         if (pci_read_config_word(pdev, 0x40, &reg) != 0)
 68                 return -1;
 69         reg &= 0xDFFF;
 70         if (pci_write_config_word(pdev, 0x40, reg) != 0)
 71                 return -1;
 72         printk(KERN_INFO DRV_NAME ": disabled chipset readahead.\n");
 73         return 0;
 74 }
 75 
 76 /**
 77  *      rz1000_init_one - Register RZ1000 ATA PCI device with kernel services
 78  *      @pdev: PCI device to register
 79  *      @ent: Entry in rz1000_pci_tbl matching with @pdev
 80  *
 81  *      Configure an RZ1000 interface. This doesn't require much special
 82  *      handling except that we *MUST* kill the chipset readahead or the
 83  *      user may experience data corruption.
 84  */
 85 
 86 static int rz1000_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
 87 {
 88         static const struct ata_port_info info = {
 89                 .flags = ATA_FLAG_SLAVE_POSS,
 90                 .pio_mask = ATA_PIO4,
 91                 .port_ops = &rz1000_port_ops
 92         };
 93         const struct ata_port_info *ppi[] = { &info, NULL };
 94 
 95         ata_print_version_once(&pdev->dev, DRV_VERSION);
 96 
 97         if (rz1000_fifo_disable(pdev) == 0)
 98                 return ata_pci_sff_init_one(pdev, ppi, &rz1000_sht, NULL, 0);
 99 
100         printk(KERN_ERR DRV_NAME ": failed to disable read-ahead on chipset..\n");
101         /* Not safe to use so skip */
102         return -ENODEV;
103 }
104 
105 #ifdef CONFIG_PM
106 static int rz1000_reinit_one(struct pci_dev *pdev)
107 {
108         struct ata_host *host = pci_get_drvdata(pdev);
109         int rc;
110 
111         rc = ata_pci_device_do_resume(pdev);
112         if (rc)
113                 return rc;
114 
115         /* If this fails on resume (which is a "can't happen" case), we
116            must stop as any progress risks data loss */
117         if (rz1000_fifo_disable(pdev))
118                 panic("rz1000 fifo");
119 
120         ata_host_resume(host);
121         return 0;
122 }
123 #endif
124 
125 static const struct pci_device_id pata_rz1000[] = {
126         { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1000), },
127         { PCI_VDEVICE(PCTECH, PCI_DEVICE_ID_PCTECH_RZ1001), },
128 
129         { },
130 };
131 
132 static struct pci_driver rz1000_pci_driver = {
133         .name           = DRV_NAME,
134         .id_table       = pata_rz1000,
135         .probe          = rz1000_init_one,
136         .remove         = ata_pci_remove_one,
137 #ifdef CONFIG_PM
138         .suspend        = ata_pci_device_suspend,
139         .resume         = rz1000_reinit_one,
140 #endif
141 };
142 
143 module_pci_driver(rz1000_pci_driver);
144 
145 MODULE_AUTHOR("Alan Cox");
146 MODULE_DESCRIPTION("low-level driver for RZ1000 PCI ATA");
147 MODULE_LICENSE("GPL");
148 MODULE_DEVICE_TABLE(pci, pata_rz1000);
149 MODULE_VERSION(DRV_VERSION);
150 

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us