Version:  2.0.40 2.2.26 2.4.37 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8

Linux/drivers/ata/Kconfig

  1 #
  2 # SATA/PATA driver configuration
  3 #
  4 
  5 config HAVE_PATA_PLATFORM
  6         bool
  7         help
  8           This is an internal configuration node for any machine that
  9           uses pata-platform driver to enable the relevant driver in the
 10           configuration structure without having to submit endless patches
 11           to update the PATA_PLATFORM entry.
 12 
 13 menuconfig ATA
 14         tristate "Serial ATA and Parallel ATA drivers (libata)"
 15         depends on HAS_IOMEM
 16         depends on BLOCK
 17         depends on !(M32R || M68K || S390) || BROKEN
 18         select SCSI
 19         select GLOB
 20         ---help---
 21           If you want to use an ATA hard disk, ATA tape drive, ATA CD-ROM or
 22           any other ATA device under Linux, say Y and make sure that you know
 23           the name of your ATA host adapter (the card inside your computer
 24           that "speaks" the ATA protocol, also called ATA controller),
 25           because you will be asked for it.
 26 
 27           NOTE: ATA enables basic SCSI support; *however*,
 28           'SCSI disk support', 'SCSI tape support', or
 29           'SCSI CDROM support' may also be needed,
 30           depending on your hardware configuration.
 31 
 32 if ATA
 33 
 34 config ATA_NONSTANDARD
 35        bool
 36        default n
 37 
 38 config ATA_VERBOSE_ERROR
 39         bool "Verbose ATA error reporting"
 40         default y
 41         help
 42           This option adds parsing of ATA command descriptions and error bits
 43           in libata kernel output, making it easier to interpret.
 44           This option will enlarge the kernel by approx. 6KB. Disable it only
 45           if kernel size is more important than ease of debugging.
 46 
 47           If unsure, say Y.
 48 
 49 config ATA_ACPI
 50         bool "ATA ACPI Support"
 51         depends on ACPI
 52         default y
 53         help
 54           This option adds support for ATA-related ACPI objects.
 55           These ACPI objects add the ability to retrieve taskfiles
 56           from the ACPI BIOS and write them to the disk controller.
 57           These objects may be related to performance, security,
 58           power management, or other areas.
 59           You can disable this at kernel boot time by using the
 60           option libata.noacpi=1
 61 
 62 config SATA_ZPODD
 63         bool "SATA Zero Power Optical Disc Drive (ZPODD) support"
 64         depends on ATA_ACPI && PM
 65         default n
 66         help
 67           This option adds support for SATA Zero Power Optical Disc
 68           Drive (ZPODD). It requires both the ODD and the platform
 69           support, and if enabled, will automatically power on/off the
 70           ODD when certain condition is satisfied. This does not impact
 71           end user's experience of the ODD, only power is saved when
 72           the ODD is not in use (i.e. no disc inside).
 73 
 74           If unsure, say N.
 75 
 76 config SATA_PMP
 77         bool "SATA Port Multiplier support"
 78         default y
 79         help
 80           This option adds support for SATA Port Multipliers
 81           (the SATA version of an ethernet hub, or SAS expander).
 82 
 83 comment "Controllers with non-SFF native interface"
 84 
 85 config SATA_AHCI
 86         tristate "AHCI SATA support"
 87         depends on PCI
 88         help
 89           This option enables support for AHCI Serial ATA.
 90 
 91           If unsure, say N.
 92 
 93 config SATA_AHCI_PLATFORM
 94         tristate "Platform AHCI SATA support"
 95         help
 96           This option enables support for Platform AHCI Serial ATA
 97           controllers.
 98 
 99           If unsure, say N.
100 
101 config AHCI_BRCM
102         tristate "Broadcom AHCI SATA support"
103         depends on ARCH_BRCMSTB || BMIPS_GENERIC || ARCH_BCM_NSP
104         help
105           This option enables support for the AHCI SATA3 controller found on
106           Broadcom SoC's.
107 
108           If unsure, say N.
109 
110 config AHCI_DA850
111         tristate "DaVinci DA850 AHCI SATA support"
112         depends on ARCH_DAVINCI_DA850
113         help
114           This option enables support for the DaVinci DA850 SoC's
115           onboard AHCI SATA.
116 
117           If unsure, say N.
118 
119 config AHCI_ST
120         tristate "ST AHCI SATA support"
121         depends on ARCH_STI
122         help
123           This option enables support for ST AHCI SATA controller.
124 
125           If unsure, say N.
126 
127 config AHCI_IMX
128         tristate "Freescale i.MX AHCI SATA support"
129         depends on MFD_SYSCON && (ARCH_MXC || COMPILE_TEST)
130         help
131           This option enables support for the Freescale i.MX SoC's
132           onboard AHCI SATA.
133 
134           If unsure, say N.
135 
136 config AHCI_CEVA
137         tristate "CEVA AHCI SATA support"
138         depends on OF
139         help
140           This option enables support for the CEVA AHCI SATA.
141           It can be found on the Xilinx Zynq UltraScale+ MPSoC.
142 
143           If unsure, say N.
144 
145 config AHCI_MVEBU
146         tristate "Marvell EBU AHCI SATA support"
147         depends on ARCH_MVEBU
148         help
149           This option enables support for the Marvebu EBU SoC's
150           onboard AHCI SATA.
151 
152           If unsure, say N.
153 
154 config AHCI_OCTEON
155         tristate "Cavium Octeon Soc Serial ATA"
156         depends on SATA_AHCI_PLATFORM && CAVIUM_OCTEON_SOC
157         default y
158         help
159           This option enables support for Cavium Octeon SoC Serial ATA.
160 
161           If unsure, say N.
162 
163 config AHCI_SUNXI
164         tristate "Allwinner sunxi AHCI SATA support"
165         depends on ARCH_SUNXI
166         help
167           This option enables support for the Allwinner sunxi SoC's
168           onboard AHCI SATA.
169 
170           If unsure, say N.
171 
172 config AHCI_TEGRA
173         tristate "NVIDIA Tegra124 AHCI SATA support"
174         depends on ARCH_TEGRA
175         help
176           This option enables support for the NVIDIA Tegra124 SoC's
177           onboard AHCI SATA.
178 
179           If unsure, say N.
180 
181 config AHCI_XGENE
182         tristate "APM X-Gene 6.0Gbps AHCI SATA host controller support"
183         depends on PHY_XGENE
184         help
185          This option enables support for APM X-Gene SoC SATA host controller.
186 
187 config AHCI_QORIQ
188         tristate "Freescale QorIQ AHCI SATA support"
189         depends on OF
190         help
191           This option enables support for the Freescale QorIQ AHCI SoC's
192           onboard AHCI SATA.
193 
194           If unsure, say N.
195 
196 config SATA_FSL
197         tristate "Freescale 3.0Gbps SATA support"
198         depends on FSL_SOC
199         help
200           This option enables support for Freescale 3.0Gbps SATA controller.
201           It can be found on MPC837x and MPC8315.
202 
203           If unsure, say N.
204 
205 config SATA_AHCI_SEATTLE
206         tristate "AMD Seattle 6.0Gbps AHCI SATA host controller support"
207         depends on ARCH_SEATTLE
208         help
209          This option enables support for AMD Seattle SATA host controller.
210 
211          If unsure, say N
212 
213 config SATA_INIC162X
214         tristate "Initio 162x SATA support (Very Experimental)"
215         depends on PCI
216         help
217           This option enables support for Initio 162x Serial ATA.
218 
219 config SATA_ACARD_AHCI
220         tristate "ACard AHCI variant (ATP 8620)"
221         depends on PCI
222         help
223           This option enables support for Acard.
224 
225           If unsure, say N.
226 
227 config SATA_SIL24
228         tristate "Silicon Image 3124/3132 SATA support"
229         depends on PCI
230         help
231           This option enables support for Silicon Image 3124/3132 Serial ATA.
232 
233           If unsure, say N.
234 
235 config ATA_SFF
236         bool "ATA SFF support (for legacy IDE and PATA)"
237         default y
238         help
239           This option adds support for ATA controllers with SFF
240           compliant or similar programming interface.
241 
242           SFF is the legacy IDE interface that has been around since
243           the dawn of time.  Almost all PATA controllers have an
244           SFF interface.  Many SATA controllers have an SFF interface
245           when configured into a legacy compatibility mode.
246 
247           For users with exclusively modern controllers like AHCI,
248           Silicon Image 3124, or Marvell 6440, you may choose to
249           disable this unneeded SFF support.
250 
251           If unsure, say Y.
252 
253 if ATA_SFF
254 
255 comment "SFF controllers with custom DMA interface"
256 
257 config PDC_ADMA
258         tristate "Pacific Digital ADMA support"
259         depends on PCI
260         help
261           This option enables support for Pacific Digital ADMA controllers
262 
263           If unsure, say N.
264 
265 config PATA_OCTEON_CF
266         tristate "OCTEON Boot Bus Compact Flash support"
267         depends on CAVIUM_OCTEON_SOC
268         help
269           This option enables a polled compact flash driver for use with
270           compact flash cards attached to the OCTEON boot bus.
271 
272           If unsure, say N.
273 
274 config SATA_QSTOR
275         tristate "Pacific Digital SATA QStor support"
276         depends on PCI
277         help
278           This option enables support for Pacific Digital Serial ATA QStor.
279 
280           If unsure, say N.
281 
282 config SATA_SX4
283         tristate "Promise SATA SX4 support (Experimental)"
284         depends on PCI
285         help
286           This option enables support for Promise Serial ATA SX4.
287 
288           If unsure, say N.
289 
290 config ATA_BMDMA
291         bool "ATA BMDMA support"
292         default y
293         help
294           This option adds support for SFF ATA controllers with BMDMA
295           capability.  BMDMA stands for bus-master DMA and is the
296           de facto DMA interface for SFF controllers.
297 
298           If unsure, say Y.
299 
300 if ATA_BMDMA
301 
302 comment "SATA SFF controllers with BMDMA"
303 
304 config ATA_PIIX
305         tristate "Intel ESB, ICH, PIIX3, PIIX4 PATA/SATA support"
306         depends on PCI
307         help
308           This option enables support for ICH5/6/7/8 Serial ATA
309           and support for PATA on the Intel ESB/ICH/PIIX3/PIIX4 series
310           host controllers.
311 
312           If unsure, say N.
313 
314 config SATA_DWC
315         tristate "DesignWare Cores SATA support"
316         depends on DMADEVICES
317         select GENERIC_PHY
318         help
319           This option enables support for the on-chip SATA controller of the
320           AppliedMicro processor 460EX.
321 
322           If unsure, say N.
323 
324 config SATA_DWC_OLD_DMA
325         bool "Support old device trees"
326         depends on SATA_DWC
327         select DW_DMAC_CORE
328         default y if 460EX
329         help
330           This option enables support for old device trees without the
331           "dmas" property.
332 
333 config SATA_DWC_DEBUG
334         bool "Debugging driver version"
335         depends on SATA_DWC
336         help
337           This option enables debugging output in the driver.
338 
339 config SATA_DWC_VDEBUG
340         bool "Verbose debug output"
341         depends on SATA_DWC_DEBUG
342         help
343           This option enables the taskfile dumping and NCQ debugging.
344 
345 config SATA_HIGHBANK
346         tristate "Calxeda Highbank SATA support"
347         depends on ARCH_HIGHBANK || COMPILE_TEST
348         help
349           This option enables support for the Calxeda Highbank SoC's
350           onboard SATA.
351 
352           If unsure, say N.
353 
354 config SATA_MV
355         tristate "Marvell SATA support"
356         depends on PCI || ARCH_DOVE || ARCH_MV78XX0 || \
357                    ARCH_MVEBU || ARCH_ORION5X || COMPILE_TEST
358         select GENERIC_PHY
359         help
360           This option enables support for the Marvell Serial ATA family.
361           Currently supports 88SX[56]0[48][01] PCI(-X) chips,
362           as well as the newer [67]042 PCI-X/PCIe and SOC devices.
363 
364           If unsure, say N.
365 
366 config SATA_NV
367         tristate "NVIDIA SATA support"
368         depends on PCI
369         help
370           This option enables support for NVIDIA Serial ATA.
371 
372           If unsure, say N.
373 
374 config SATA_PROMISE
375         tristate "Promise SATA TX2/TX4 support"
376         depends on PCI
377         help
378           This option enables support for Promise Serial ATA TX2/TX4.
379 
380           If unsure, say N.
381 
382 config SATA_RCAR
383         tristate "Renesas R-Car SATA support"
384         depends on ARCH_RENESAS || COMPILE_TEST
385         help
386           This option enables support for Renesas R-Car Serial ATA.
387 
388           If unsure, say N.
389 
390 config SATA_SIL
391         tristate "Silicon Image SATA support"
392         depends on PCI
393         help
394           This option enables support for Silicon Image Serial ATA.
395 
396           If unsure, say N.
397 
398 config SATA_SIS
399         tristate "SiS 964/965/966/180 SATA support"
400         depends on PCI
401         select PATA_SIS
402         help
403           This option enables support for SiS Serial ATA on
404           SiS 964/965/966/180 and Parallel ATA on SiS 180.
405           The PATA support for SiS 180 requires additionally to
406           enable the PATA_SIS driver in the config.
407           If unsure, say N.
408 
409 config SATA_SVW
410         tristate "ServerWorks Frodo / Apple K2 SATA support"
411         depends on PCI
412         help
413           This option enables support for Broadcom/Serverworks/Apple K2
414           SATA support.
415 
416           If unsure, say N.
417 
418 config SATA_ULI
419         tristate "ULi Electronics SATA support"
420         depends on PCI
421         help
422           This option enables support for ULi Electronics SATA.
423 
424           If unsure, say N.
425 
426 config SATA_VIA
427         tristate "VIA SATA support"
428         depends on PCI
429         help
430           This option enables support for VIA Serial ATA.
431 
432           If unsure, say N.
433 
434 config SATA_VITESSE
435         tristate "VITESSE VSC-7174 / INTEL 31244 SATA support"
436         depends on PCI
437         help
438           This option enables support for Vitesse VSC7174 and Intel 31244 Serial ATA.
439 
440           If unsure, say N.
441 
442 comment "PATA SFF controllers with BMDMA"
443 
444 config PATA_ALI
445         tristate "ALi PATA support"
446         depends on PCI
447         help
448           This option enables support for the ALi ATA interfaces
449           found on the many ALi chipsets.
450 
451           If unsure, say N.
452 
453 config PATA_AMD
454         tristate "AMD/NVidia PATA support"
455         depends on PCI
456         help
457           This option enables support for the AMD and NVidia PATA
458           interfaces found on the chipsets for Athlon/Athlon64.
459 
460           If unsure, say N.
461 
462 config PATA_ARASAN_CF
463         tristate "ARASAN CompactFlash PATA Controller Support"
464         depends on ARCH_SPEAR13XX || COMPILE_TEST
465         depends on DMADEVICES
466         select DMA_ENGINE
467         help
468           Say Y here to support the ARASAN CompactFlash PATA controller
469 
470 config PATA_ARTOP
471         tristate "ARTOP 6210/6260 PATA support"
472         depends on PCI
473         help
474           This option enables support for ARTOP PATA controllers.
475 
476           If unsure, say N.
477 
478 config PATA_ATIIXP
479         tristate "ATI PATA support"
480         depends on PCI
481         help
482           This option enables support for the ATI ATA interfaces
483           found on the many ATI chipsets.
484 
485           If unsure, say N.
486 
487 config PATA_ATP867X
488         tristate "ARTOP/Acard ATP867X PATA support"
489         depends on PCI
490         help
491           This option enables support for ARTOP/Acard ATP867X PATA
492           controllers.
493 
494           If unsure, say N.
495 
496 config PATA_BF54X
497         tristate "Blackfin 54x ATAPI support"
498         depends on BF542 || BF548 || BF549
499         help
500           This option enables support for the built-in ATAPI controller on
501           Blackfin 54x family chips.
502 
503           If unsure, say N.
504 
505 config PATA_CMD64X
506         tristate "CMD64x PATA support"
507         depends on PCI
508         help
509           This option enables support for the CMD64x series chips
510           except for the CMD640.
511 
512           If unsure, say N.
513 
514 config PATA_CS5520
515         tristate "CS5510/5520 PATA support"
516         depends on PCI && (X86_32 || COMPILE_TEST)
517         help
518           This option enables support for the Cyrix 5510/5520
519           companion chip used with the MediaGX/Geode processor family.
520 
521           If unsure, say N.
522 
523 config PATA_CS5530
524         tristate "CS5530 PATA support"
525         depends on PCI && (X86_32 || COMPILE_TEST)
526         help
527           This option enables support for the Cyrix/NatSemi/AMD CS5530
528           companion chip used with the MediaGX/Geode processor family.
529 
530           If unsure, say N.
531 
532 config PATA_CS5535
533         tristate "CS5535 PATA support (Experimental)"
534         depends on PCI && X86_32
535         help
536           This option enables support for the NatSemi/AMD CS5535
537           companion chip used with the Geode processor family.
538 
539           If unsure, say N.
540 
541 config PATA_CS5536
542         tristate "CS5536 PATA support"
543         depends on PCI && (X86_32 || MIPS || COMPILE_TEST)
544         help
545           This option enables support for the AMD CS5536
546           companion chip used with the Geode LX processor family.
547 
548           If unsure, say N.
549 
550 config PATA_CYPRESS
551         tristate "Cypress CY82C693 PATA support (Very Experimental)"
552         depends on PCI
553         help
554           This option enables support for the Cypress/Contaq CY82C693
555           chipset found in some Alpha systems
556 
557           If unsure, say N.
558 
559 config PATA_EFAR
560         tristate "EFAR SLC90E66 support"
561         depends on PCI
562         help
563           This option enables support for the EFAR SLC90E66
564           IDE controller found on some older machines.
565 
566           If unsure, say N.
567 
568 config PATA_EP93XX
569         tristate "Cirrus Logic EP93xx PATA support"
570         depends on ARCH_EP93XX
571         help
572           This option enables support for the PATA controller in
573           the Cirrus Logic EP9312 and EP9315 ARM CPU.
574 
575           If unsure, say N.
576 
577 config PATA_HPT366
578         tristate "HPT 366/368 PATA support"
579         depends on PCI
580         help
581           This option enables support for the HPT 366 and 368
582           PATA controllers via the new ATA layer.
583 
584           If unsure, say N.
585 
586 config PATA_HPT37X
587         tristate "HPT 370/370A/371/372/374/302 PATA support"
588         depends on PCI
589         help
590           This option enables support for the majority of the later HPT
591           PATA controllers via the new ATA layer.
592 
593           If unsure, say N.
594 
595 config PATA_HPT3X2N
596         tristate "HPT 371N/372N/302N PATA support"
597         depends on PCI
598         help
599           This option enables support for the N variant HPT PATA
600           controllers via the new ATA layer.
601 
602           If unsure, say N.
603 
604 config PATA_HPT3X3
605         tristate "HPT 343/363 PATA support"
606         depends on PCI
607         help
608           This option enables support for the HPT 343/363
609           PATA controllers via the new ATA layer
610 
611           If unsure, say N.
612 
613 config PATA_HPT3X3_DMA
614         bool "HPT 343/363 DMA support"
615         depends on PATA_HPT3X3
616         help
617           This option enables DMA support for the HPT343/363
618           controllers. Enable with care as there are still some
619           problems with DMA on this chipset.
620 
621 config PATA_ICSIDE
622         tristate "Acorn ICS PATA support"
623         depends on ARM && ARCH_ACORN
624         help
625           On Acorn systems, say Y here if you wish to use the ICS PATA
626           interface card.  This is not required for ICS partition support.
627           If you are unsure, say N to this.
628 
629 config PATA_IMX
630         tristate "PATA support for Freescale iMX"
631         depends on ARCH_MXC
632         help
633           This option enables support for the PATA host available on Freescale
634           iMX SoCs.
635 
636           If unsure, say N.
637 
638 config PATA_IT8213
639         tristate "IT8213 PATA support (Experimental)"
640         depends on PCI
641         help
642           This option enables support for the ITE 821 PATA
643           controllers via the new ATA layer.
644 
645           If unsure, say N.
646 
647 config PATA_IT821X
648         tristate "IT8211/2 PATA support"
649         depends on PCI
650         help
651           This option enables support for the ITE 8211 and 8212
652           PATA controllers via the new ATA layer, including RAID
653           mode.
654 
655           If unsure, say N.
656 
657 config PATA_JMICRON
658         tristate "JMicron PATA support"
659         depends on PCI
660         help
661           Enable support for the JMicron IDE controller, via the new
662           ATA layer.
663 
664           If unsure, say N.
665 
666 config PATA_MACIO
667         tristate "Apple PowerMac/PowerBook internal 'MacIO' IDE"
668         depends on PPC_PMAC
669         help
670           Most IDE capable PowerMacs have IDE busses driven by a variant
671           of this controller which is part of the Apple chipset used on
672           most PowerMac models. Some models have multiple busses using
673           different chipsets, though generally, MacIO is one of them.
674 
675 config PATA_MARVELL
676         tristate "Marvell PATA support via legacy mode"
677         depends on PCI
678         help
679           This option enables limited support for the Marvell 88SE61xx ATA
680           controllers. If you wish to use only the SATA ports then select
681           the AHCI driver alone. If you wish to the use the PATA port or
682           both SATA and PATA include this driver.
683 
684           If unsure, say N.
685 
686 config PATA_MPC52xx
687         tristate "Freescale MPC52xx SoC internal IDE"
688         depends on PPC_MPC52xx && PPC_BESTCOMM
689         select PPC_BESTCOMM_ATA
690         help
691           This option enables support for integrated IDE controller
692           of the Freescale MPC52xx SoC.
693 
694           If unsure, say N.
695 
696 config PATA_NETCELL
697         tristate "NETCELL Revolution RAID support"
698         depends on PCI
699         help
700           This option enables support for the Netcell Revolution RAID
701           PATA controller.
702 
703           If unsure, say N.
704 
705 config PATA_NINJA32
706         tristate "Ninja32/Delkin Cardbus ATA support"
707         depends on PCI
708         help
709           This option enables support for the Ninja32, Delkin and
710           possibly other brands of Cardbus ATA adapter
711 
712           If unsure, say N.
713 
714 config PATA_NS87415
715         tristate "Nat Semi NS87415 PATA support"
716         depends on PCI
717         help
718           This option enables support for the National Semiconductor
719           NS87415 PCI-IDE controller.
720 
721           If unsure, say N.
722 
723 config PATA_OLDPIIX
724         tristate "Intel PATA old PIIX support"
725         depends on PCI
726         help
727           This option enables support for early PIIX PATA support.
728 
729           If unsure, say N.
730 
731 config PATA_OPTIDMA
732         tristate "OPTI FireStar PATA support (Very Experimental)"
733         depends on PCI
734         help
735           This option enables DMA/PIO support for the later OPTi
736           controllers found on some old motherboards and in some
737           laptops.
738 
739           If unsure, say N.
740 
741 config PATA_PDC2027X
742         tristate "Promise PATA 2027x support"
743         depends on PCI
744         help
745           This option enables support for Promise PATA pdc20268 to pdc20277 host adapters.
746 
747           If unsure, say N.
748 
749 config PATA_PDC_OLD
750         tristate "Older Promise PATA controller support"
751         depends on PCI
752         help
753           This option enables support for the Promise 20246, 20262, 20263,
754           20265 and 20267 adapters.
755 
756           If unsure, say N.
757 
758 config PATA_RADISYS
759         tristate "RADISYS 82600 PATA support (Experimental)"
760         depends on PCI
761         help
762           This option enables support for the RADISYS 82600
763           PATA controllers via the new ATA layer
764 
765           If unsure, say N.
766 
767 config PATA_RDC
768         tristate "RDC PATA support"
769         depends on PCI
770         help
771           This option enables basic support for the later RDC PATA controllers
772           controllers via the new ATA layer. For the RDC 1010, you need to
773           enable the IT821X driver instead.
774 
775           If unsure, say N.
776 
777 config PATA_SC1200
778         tristate "SC1200 PATA support"
779         depends on PCI && (X86_32 || COMPILE_TEST)
780         help
781           This option enables support for the NatSemi/AMD SC1200 SoC
782           companion chip used with the Geode processor family.
783 
784           If unsure, say N.
785 
786 config PATA_SCH
787         tristate "Intel SCH PATA support"
788         depends on PCI
789         help
790           This option enables support for Intel SCH PATA on the Intel
791           SCH (US15W, US15L, UL11L) series host controllers.
792 
793           If unsure, say N.
794 
795 config PATA_SERVERWORKS
796         tristate "SERVERWORKS OSB4/CSB5/CSB6/HT1000 PATA support"
797         depends on PCI
798         help
799           This option enables support for the Serverworks OSB4/CSB5/CSB6 and
800           HT1000 PATA controllers, via the new ATA layer.
801 
802           If unsure, say N.
803 
804 config PATA_SIL680
805         tristate "CMD / Silicon Image 680 PATA support"
806         depends on PCI
807         help
808           This option enables support for CMD / Silicon Image 680 PATA.
809 
810           If unsure, say N.
811 
812 config PATA_SIS
813         tristate "SiS PATA support"
814         depends on PCI
815         help
816           This option enables support for SiS PATA controllers
817 
818           If unsure, say N.
819 
820 config PATA_TOSHIBA
821         tristate "Toshiba Piccolo support (Experimental)"
822         depends on PCI
823         help
824           Support for the Toshiba Piccolo controllers. Currently only the
825           primary channel is supported by this driver.
826 
827           If unsure, say N.
828 
829 config PATA_TRIFLEX
830         tristate "Compaq Triflex PATA support"
831         depends on PCI
832         help
833           Enable support for the Compaq 'Triflex' IDE controller as found
834           on many Compaq Pentium-Pro systems, via the new ATA layer.
835 
836           If unsure, say N.
837 
838 config PATA_VIA
839         tristate "VIA PATA support"
840         depends on PCI
841         help
842           This option enables support for the VIA PATA interfaces
843           found on the many VIA chipsets.
844 
845           If unsure, say N.
846 
847 config PATA_PXA
848         tristate "PXA DMA-capable PATA support"
849         depends on ARCH_PXA
850         help
851           This option enables support for harddrive attached to PXA CPU's bus.
852 
853           NOTE: This driver utilizes PXA DMA controller, in case your hardware
854                 is not capable of doing MWDMA, use pata_platform instead.
855 
856           If unsure, say N.
857 
858 config PATA_WINBOND
859         tristate "Winbond SL82C105 PATA support"
860         depends on PCI
861         help
862           This option enables support for SL82C105 PATA devices found in the
863           Netwinder and some other systems
864 
865           If unsure, say N.
866 
867 endif # ATA_BMDMA
868 
869 comment "PIO-only SFF controllers"
870 
871 config PATA_AT32
872         tristate "Atmel AVR32 PATA support (Experimental)"
873         depends on AVR32 && PLATFORM_AT32AP
874         help
875           This option enables support for the IDE devices on the
876           Atmel AT32AP platform.
877 
878           If unsure, say N.
879 
880 config PATA_AT91
881         tristate "PATA support for AT91SAM9260"
882         depends on ARM && SOC_AT91SAM9
883         help
884           This option enables support for IDE devices on the Atmel AT91SAM9260 SoC.
885 
886           If unsure, say N.
887 
888 config PATA_CMD640_PCI
889         tristate "CMD640 PCI PATA support (Experimental)"
890         depends on PCI
891         help
892           This option enables support for the CMD640 PCI IDE
893           interface chip. Only the primary channel is currently
894           supported.
895 
896           If unsure, say N.
897 
898 config PATA_ISAPNP
899         tristate "ISA Plug and Play PATA support"
900         depends on ISAPNP
901         help
902           This option enables support for ISA plug & play ATA
903           controllers such as those found on old soundcards.
904 
905           If unsure, say N.
906 
907 config PATA_IXP4XX_CF
908         tristate "IXP4XX Compact Flash support"
909         depends on ARCH_IXP4XX
910         help
911           This option enables support for a Compact Flash connected on
912           the ixp4xx expansion bus. This driver had been written for
913           Loft/Avila boards in mind but can work with others.
914 
915           If unsure, say N.
916 
917 config PATA_MPIIX
918         tristate "Intel PATA MPIIX support"
919         depends on PCI
920         help
921           This option enables support for MPIIX PATA support.
922 
923           If unsure, say N.
924 
925 config PATA_NS87410
926         tristate "Nat Semi NS87410 PATA support"
927         depends on PCI
928         help
929           This option enables support for the National Semiconductor
930           NS87410 PCI-IDE controller.
931 
932           If unsure, say N.
933 
934 config PATA_OPTI
935         tristate "OPTI621/6215 PATA support (Very Experimental)"
936         depends on PCI
937         help
938           This option enables full PIO support for the early Opti ATA
939           controllers found on some old motherboards.
940 
941           If unsure, say N.
942 
943 config PATA_PALMLD
944         tristate "Palm LifeDrive PATA support"
945         depends on MACH_PALMLD
946         help
947           This option enables support for Palm LifeDrive's internal ATA
948           port via the new ATA layer.
949 
950           If unsure, say N.
951 
952 config PATA_PCMCIA
953         tristate "PCMCIA PATA support"
954         depends on PCMCIA
955         help
956           This option enables support for PCMCIA ATA interfaces, including
957           compact flash card adapters via the new ATA layer.
958 
959           If unsure, say N.
960 
961 config PATA_PLATFORM
962         tristate "Generic platform device PATA support"
963         depends on EXPERT || PPC || HAVE_PATA_PLATFORM
964         help
965           This option enables support for generic directly connected ATA
966           devices commonly found on embedded systems.
967 
968           If unsure, say N.
969 
970 config PATA_OF_PLATFORM
971         tristate "OpenFirmware platform device PATA support"
972         depends on PATA_PLATFORM && OF
973         help
974           This option enables support for generic directly connected ATA
975           devices commonly found on embedded systems with OpenFirmware
976           bindings.
977 
978           If unsure, say N.
979 
980 config PATA_QDI
981         tristate "QDI VLB PATA support"
982         depends on ISA
983         select PATA_LEGACY
984         help
985           Support for QDI 6500 and 6580 PATA controllers on VESA local bus.
986 
987 config PATA_RB532
988         tristate "RouterBoard 532 PATA CompactFlash support"
989         depends on MIKROTIK_RB532
990         help
991           This option enables support for the RouterBoard 532
992           PATA CompactFlash controller.
993 
994           If unsure, say N.
995 
996 config PATA_RZ1000
997         tristate "PC Tech RZ1000 PATA support"
998         depends on PCI
999         help
1000           This option enables basic support for the PC Tech RZ1000/1
1001           PATA controllers via the new ATA layer
1002 
1003           If unsure, say N.
1004 
1005 config PATA_SAMSUNG_CF
1006         tristate "Samsung SoC PATA support"
1007         depends on SAMSUNG_DEV_IDE
1008         help
1009           This option enables basic support for Samsung's S3C/S5P board
1010           PATA controllers via the new ATA layer
1011 
1012           If unsure, say N.
1013 
1014 config PATA_WINBOND_VLB
1015         tristate "Winbond W83759A VLB PATA support (Experimental)"
1016         depends on ISA
1017         select PATA_LEGACY
1018         help
1019           Support for the Winbond W83759A controller on Vesa Local Bus
1020           systems.
1021 
1022 comment "Generic fallback / legacy drivers"
1023 
1024 config PATA_ACPI
1025         tristate "ACPI firmware driver for PATA"
1026         depends on ATA_ACPI && ATA_BMDMA
1027         help
1028           This option enables an ACPI method driver which drives
1029           motherboard PATA controller interfaces through the ACPI
1030           firmware in the BIOS. This driver can sometimes handle
1031           otherwise unsupported hardware.
1032 
1033 config ATA_GENERIC
1034         tristate "Generic ATA support"
1035         depends on PCI && ATA_BMDMA
1036         help
1037           This option enables support for generic BIOS configured
1038           ATA controllers via the new ATA layer
1039 
1040           If unsure, say N.
1041 
1042 config PATA_LEGACY
1043         tristate "Legacy ISA PATA support (Experimental)"
1044         depends on (ISA || PCI)
1045         help
1046           This option enables support for ISA/VLB/PCI bus legacy PATA
1047           ports and allows them to be accessed via the new ATA layer.
1048 
1049           If unsure, say N.
1050 
1051 endif # ATA_SFF
1052 endif # ATA

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us