Version:  2.0.40 2.2.26 2.4.37 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1 4.2 4.3 4.4 4.5 4.6 4.7 4.8 4.9

Linux/drivers/Makefile

  1 #
  2 # Makefile for the Linux kernel device drivers.
  3 #
  4 # 15 Sep 2000, Christoph Hellwig <hch@infradead.org>
  5 # Rewritten to use lists instead of if-statements.
  6 #
  7 
  8 obj-y                           += irqchip/
  9 obj-y                           += bus/
 10 
 11 obj-$(CONFIG_GENERIC_PHY)       += phy/
 12 
 13 # GPIO must come after pinctrl as gpios may need to mux pins etc
 14 obj-$(CONFIG_PINCTRL)           += pinctrl/
 15 obj-$(CONFIG_GPIOLIB)           += gpio/
 16 obj-y                           += pwm/
 17 obj-$(CONFIG_PCI)               += pci/
 18 obj-$(CONFIG_PARISC)            += parisc/
 19 obj-$(CONFIG_RAPIDIO)           += rapidio/
 20 obj-y                           += video/
 21 obj-y                           += idle/
 22 
 23 # IPMI must come before ACPI in order to provide IPMI opregion support
 24 obj-y                           += char/ipmi/
 25 
 26 obj-$(CONFIG_ACPI)              += acpi/
 27 obj-$(CONFIG_SFI)               += sfi/
 28 # PnP must come after ACPI since it will eventually need to check if acpi
 29 # was used and do nothing if so
 30 obj-$(CONFIG_PNP)               += pnp/
 31 obj-y                           += amba/
 32 
 33 obj-y                           += clk/
 34 # Many drivers will want to use DMA so this has to be made available
 35 # really early.
 36 obj-$(CONFIG_DMADEVICES)        += dma/
 37 
 38 # SOC specific infrastructure drivers.
 39 obj-y                           += soc/
 40 
 41 obj-$(CONFIG_VIRTIO)            += virtio/
 42 obj-$(CONFIG_XEN)               += xen/
 43 
 44 # regulators early, since some subsystems rely on them to initialize
 45 obj-$(CONFIG_REGULATOR)         += regulator/
 46 
 47 # reset controllers early, since gpu drivers might rely on them to initialize
 48 obj-$(CONFIG_RESET_CONTROLLER)  += reset/
 49 
 50 # tty/ comes before char/ so that the VT console is the boot-time
 51 # default.
 52 obj-y                           += tty/
 53 obj-y                           += char/
 54 
 55 # iommu/ comes before gpu as gpu are using iommu controllers
 56 obj-$(CONFIG_IOMMU_SUPPORT)     += iommu/
 57 
 58 # gpu/ comes after char for AGP vs DRM startup and after iommu
 59 obj-y                           += gpu/
 60 
 61 obj-$(CONFIG_CONNECTOR)         += connector/
 62 
 63 # i810fb and intelfb depend on char/agp/
 64 obj-$(CONFIG_FB_I810)           += video/fbdev/i810/
 65 obj-$(CONFIG_FB_INTEL)          += video/fbdev/intelfb/
 66 
 67 obj-$(CONFIG_PARPORT)           += parport/
 68 obj-$(CONFIG_NVM)               += lightnvm/
 69 obj-y                           += base/ block/ misc/ mfd/ nfc/
 70 obj-$(CONFIG_LIBNVDIMM)         += nvdimm/
 71 obj-$(CONFIG_DEV_DAX)           += dax/
 72 obj-$(CONFIG_DMA_SHARED_BUFFER) += dma-buf/
 73 obj-$(CONFIG_NUBUS)             += nubus/
 74 obj-y                           += macintosh/
 75 obj-$(CONFIG_IDE)               += ide/
 76 obj-$(CONFIG_SCSI)              += scsi/
 77 obj-y                           += nvme/
 78 obj-$(CONFIG_ATA)               += ata/
 79 obj-$(CONFIG_TARGET_CORE)       += target/
 80 obj-$(CONFIG_MTD)               += mtd/
 81 obj-$(CONFIG_SPI)               += spi/
 82 obj-$(CONFIG_SPMI)              += spmi/
 83 obj-$(CONFIG_HSI)               += hsi/
 84 obj-y                           += net/
 85 obj-$(CONFIG_ATM)               += atm/
 86 obj-$(CONFIG_FUSION)            += message/
 87 obj-y                           += firewire/
 88 obj-$(CONFIG_UIO)               += uio/
 89 obj-$(CONFIG_VFIO)              += vfio/
 90 obj-y                           += cdrom/
 91 obj-y                           += auxdisplay/
 92 obj-$(CONFIG_PCCARD)            += pcmcia/
 93 obj-$(CONFIG_DIO)               += dio/
 94 obj-$(CONFIG_SBUS)              += sbus/
 95 obj-$(CONFIG_ZORRO)             += zorro/
 96 obj-$(CONFIG_ATA_OVER_ETH)      += block/aoe/
 97 obj-$(CONFIG_PARIDE)            += block/paride/
 98 obj-$(CONFIG_TC)                += tc/
 99 obj-$(CONFIG_UWB)               += uwb/
100 obj-$(CONFIG_USB_PHY)           += usb/
101 obj-$(CONFIG_USB)               += usb/
102 obj-$(CONFIG_PCI)               += usb/
103 obj-$(CONFIG_USB_GADGET)        += usb/
104 obj-$(CONFIG_SERIO)             += input/serio/
105 obj-$(CONFIG_GAMEPORT)          += input/gameport/
106 obj-$(CONFIG_INPUT)             += input/
107 obj-$(CONFIG_RTC_LIB)           += rtc/
108 obj-y                           += i2c/ media/
109 obj-$(CONFIG_PPS)               += pps/
110 obj-$(CONFIG_PTP_1588_CLOCK)    += ptp/
111 obj-$(CONFIG_W1)                += w1/
112 obj-y                           += power/
113 obj-$(CONFIG_HWMON)             += hwmon/
114 obj-$(CONFIG_THERMAL)           += thermal/
115 obj-$(CONFIG_WATCHDOG)          += watchdog/
116 obj-$(CONFIG_MD)                += md/
117 obj-$(CONFIG_BT)                += bluetooth/
118 obj-$(CONFIG_ACCESSIBILITY)     += accessibility/
119 obj-$(CONFIG_ISDN)              += isdn/
120 obj-$(CONFIG_EDAC)              += edac/
121 obj-$(CONFIG_EISA)              += eisa/
122 obj-y                           += lguest/
123 obj-$(CONFIG_CPU_FREQ)          += cpufreq/
124 obj-$(CONFIG_CPU_IDLE)          += cpuidle/
125 obj-y                           += mmc/
126 obj-$(CONFIG_MEMSTICK)          += memstick/
127 obj-$(CONFIG_NEW_LEDS)          += leds/
128 obj-$(CONFIG_INFINIBAND)        += infiniband/
129 obj-$(CONFIG_SGI_SN)            += sn/
130 obj-y                           += firmware/
131 obj-$(CONFIG_CRYPTO)            += crypto/
132 obj-$(CONFIG_SUPERH)            += sh/
133 ifndef CONFIG_ARCH_USES_GETTIMEOFFSET
134 obj-y                           += clocksource/
135 endif
136 obj-$(CONFIG_DCA)               += dca/
137 obj-$(CONFIG_HID)               += hid/
138 obj-$(CONFIG_PPC_PS3)           += ps3/
139 obj-$(CONFIG_OF)                += of/
140 obj-$(CONFIG_SSB)               += ssb/
141 obj-$(CONFIG_BCMA)              += bcma/
142 obj-$(CONFIG_VHOST_RING)        += vhost/
143 obj-$(CONFIG_VHOST)             += vhost/
144 obj-$(CONFIG_VLYNQ)             += vlynq/
145 obj-$(CONFIG_STAGING)           += staging/
146 obj-y                           += platform/
147 
148 obj-$(CONFIG_MAILBOX)           += mailbox/
149 obj-$(CONFIG_HWSPINLOCK)        += hwspinlock/
150 obj-$(CONFIG_REMOTEPROC)        += remoteproc/
151 obj-$(CONFIG_RPMSG)             += rpmsg/
152 
153 # Virtualization drivers
154 obj-$(CONFIG_VIRT_DRIVERS)      += virt/
155 obj-$(CONFIG_HYPERV)            += hv/
156 
157 obj-$(CONFIG_PM_DEVFREQ)        += devfreq/
158 obj-$(CONFIG_EXTCON)            += extcon/
159 obj-$(CONFIG_MEMORY)            += memory/
160 obj-$(CONFIG_IIO)               += iio/
161 obj-$(CONFIG_VME_BUS)           += vme/
162 obj-$(CONFIG_IPACK_BUS)         += ipack/
163 obj-$(CONFIG_NTB)               += ntb/
164 obj-$(CONFIG_FMC)               += fmc/
165 obj-$(CONFIG_POWERCAP)          += powercap/
166 obj-$(CONFIG_MCB)               += mcb/
167 obj-$(CONFIG_PERF_EVENTS)       += perf/
168 obj-$(CONFIG_RAS)               += ras/
169 obj-$(CONFIG_THUNDERBOLT)       += thunderbolt/
170 obj-$(CONFIG_CORESIGHT)         += hwtracing/coresight/
171 obj-y                           += hwtracing/intel_th/
172 obj-$(CONFIG_STM)               += hwtracing/stm/
173 obj-$(CONFIG_ANDROID)           += android/
174 obj-$(CONFIG_NVMEM)             += nvmem/
175 obj-$(CONFIG_FPGA)              += fpga/

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us