Version:  2.0.40 2.2.26 2.4.37 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

Linux/arch/powerpc/platforms/ps3/Kconfig

  1 config PPC_PS3
  2         bool "Sony PS3"
  3         depends on PPC64 && PPC_BOOK3S
  4         select PPC_CELL
  5         select USB_OHCI_LITTLE_ENDIAN
  6         select USB_OHCI_BIG_ENDIAN_MMIO
  7         select USB_EHCI_BIG_ENDIAN_MMIO
  8         select PPC_PCI_CHOICE
  9         help
 10           This option enables support for the Sony PS3 game console
 11           and other platforms using the PS3 hypervisor.  Enabling this
 12           option will allow building otheros.bld, a kernel image suitable
 13           for programming into flash memory, and vmlinux, a kernel image
 14           suitable for loading via kexec.
 15 
 16 menu "PS3 Platform Options"
 17         depends on PPC_PS3
 18 
 19 config PS3_ADVANCED
 20         depends on PPC_PS3
 21         bool "PS3 Advanced configuration options"
 22         help
 23           This gives you access to some advanced options for the PS3. The
 24           defaults should be fine for most users, but these options may make
 25           it possible to better control the kernel configuration if you know
 26           what you are doing.
 27 
 28           Note that the answer to this question won't directly affect the
 29           kernel: saying N will just cause the configurator to skip all
 30           the questions about these options.
 31 
 32           Most users should say N to this question.
 33 
 34 config PS3_HTAB_SIZE
 35         depends on PPC_PS3
 36         int "PS3 Platform pagetable size" if PS3_ADVANCED
 37         range 18 20
 38         default 20
 39         help
 40           This option is only for experts who may have the desire to fine
 41           tune the pagetable size on their system.  The value here is
 42           expressed as the log2 of the page table size.  Valid values are
 43           18, 19, and 20, corresponding to 256KB, 512KB and 1MB respectively.
 44 
 45           If unsure, choose the default (20) with the confidence that your
 46           system will have optimal runtime performance.
 47 
 48 config PS3_DYNAMIC_DMA
 49         depends on PPC_PS3
 50         bool "PS3 Platform dynamic DMA page table management"
 51         default n
 52         help
 53           This option will enable kernel support to take advantage of the
 54           per device dynamic DMA page table management provided by the Cell
 55           processor's IO Controller.  This support incurs some runtime
 56           overhead and also slightly increases kernel memory usage.  The
 57           current implementation should be considered experimental.
 58 
 59           This support is mainly for Linux kernel development.  If unsure,
 60           say N.
 61 
 62 config PS3_VUART
 63         depends on PPC_PS3
 64         tristate
 65 
 66 config PS3_PS3AV
 67         depends on PPC_PS3
 68         tristate "PS3 AV settings driver" if PS3_ADVANCED
 69         select PS3_VUART
 70         default y
 71         help
 72           Include support for the PS3 AV Settings driver.
 73 
 74           This support is required for PS3 graphics and sound. In
 75           general, all users will say Y or M.
 76 
 77 config PS3_SYS_MANAGER
 78         depends on PPC_PS3
 79         tristate "PS3 System Manager driver" if PS3_ADVANCED
 80         select PS3_VUART
 81         default y
 82         help
 83           Include support for the PS3 System Manager.
 84 
 85           This support is required for PS3 system control.  In
 86           general, all users will say Y or M.
 87 
 88 config PS3_REPOSITORY_WRITE
 89         bool "PS3 Repository write support" if PS3_ADVANCED
 90         depends on PPC_PS3
 91         default n
 92         help
 93           Enables support for writing to the PS3 System Repository.
 94 
 95           This support is intended for bootloaders that need to store data
 96           in the repository for later boot stages.
 97 
 98           If in doubt, say N here and reduce the size of the kernel by a
 99           small amount.
100 
101 config PS3_STORAGE
102         depends on PPC_PS3
103         tristate
104 
105 config PS3_DISK
106         tristate "PS3 Disk Storage Driver"
107         depends on PPC_PS3 && BLOCK
108         select PS3_STORAGE
109         help
110           Include support for the PS3 Disk Storage.
111 
112           This support is required to access the PS3 hard disk.
113           In general, all users will say Y or M.
114 
115 config PS3_ROM
116         tristate "PS3 BD/DVD/CD-ROM Storage Driver"
117         depends on PPC_PS3 && SCSI
118         select PS3_STORAGE
119         help
120           Include support for the PS3 ROM Storage.
121 
122           This support is required to access the PS3 BD/DVD/CD-ROM drive.
123           In general, all users will say Y or M.
124           Also make sure to say Y or M to "SCSI CDROM support" later.
125 
126 config PS3_FLASH
127         tristate "PS3 FLASH ROM Storage Driver"
128         depends on PPC_PS3
129         select PS3_STORAGE
130         help
131           Include support for the PS3 FLASH ROM Storage.
132 
133           This support is required to access the PS3 FLASH ROM, which
134           contains the boot loader and some boot options.
135           In general, PS3 OtherOS users will say Y or M.
136 
137           As this driver needs a fixed buffer of 256 KiB of memory, it can
138           be disabled on the kernel command line using "ps3flash=off", to
139           not allocate this fixed buffer.
140 
141 config PS3_VRAM
142         tristate "PS3 Video RAM Storage Driver"
143         depends on FB_PS3=y && BLOCK && m
144         help
145           This driver allows you to use excess PS3 video RAM as volatile
146           storage or system swap.
147 
148 config PS3_LPM
149         tristate "PS3 Logical Performance Monitor support"
150         depends on PPC_PS3
151         help
152           Include support for the PS3 Logical Performance Monitor.
153 
154           This support is required to use the logical performance monitor
155           of the PS3's LV1 hypervisor.
156 
157           If you intend to use the advanced performance monitoring and
158           profiling support of the Cell processor with programs like
159           oprofile and perfmon2, then say Y or M, otherwise say N.
160 
161 config PS3GELIC_UDBG
162         bool "PS3 udbg output via UDP broadcasts on Ethernet"
163         depends on PPC_PS3
164         help
165           Enables udbg early debugging output by sending broadcast UDP
166           via the Ethernet port (UDP port number 18194).
167 
168           This driver uses a trivial implementation and is independent
169           from the main PS3 gelic network driver.
170 
171           If in doubt, say N here.
172 
173 endmenu

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us