Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/arch/powerpc/platforms/52xx/Kconfig

  1 config PPC_MPC52xx
  2         bool "52xx-based boards"
  3         depends on 6xx
  4         select COMMON_CLK
  5         select PPC_PCI_CHOICE
  6 
  7 config PPC_MPC5200_SIMPLE
  8         bool "Generic support for simple MPC5200 based boards"
  9         depends on PPC_MPC52xx
 10         select DEFAULT_UIMAGE
 11         help
 12           This option enables support for a simple MPC52xx based boards which
 13           do not need a custom platform specific setup. Such boards are
 14           supported assuming the following:
 15 
 16           - GPIO pins are configured by the firmware,
 17           - CDM configuration (clocking) is setup correctly by firmware,
 18           - if the 'fsl,has-wdt' property is present in one of the
 19             gpt nodes, then it is safe to use such gpt to reset the board,
 20           - PCI is supported if enabled in the kernel configuration
 21             and if there is a PCI bus node defined in the device tree.
 22 
 23           Boards that are compatible with this generic platform support
 24           are:
 25              intercontrol,digsy-mtc
 26              phytec,pcm030
 27              phytec,pcm032
 28              promess,motionpro
 29              schindler,cm5200
 30              tqc,tqm5200
 31 
 32 config PPC_EFIKA
 33         bool "bPlan Efika 5k2. MPC5200B based computer"
 34         depends on PPC_MPC52xx
 35         select PPC_RTAS
 36         select RTAS_PROC
 37         select PPC_NATIVE
 38 
 39 config PPC_LITE5200
 40         bool "Freescale Lite5200 Eval Board"
 41         depends on PPC_MPC52xx
 42         select DEFAULT_UIMAGE
 43 
 44 config PPC_MEDIA5200
 45         bool "Freescale Media5200 Eval Board"
 46         depends on PPC_MPC52xx
 47         select DEFAULT_UIMAGE
 48 
 49 config PPC_MPC5200_BUGFIX
 50         bool "MPC5200 (L25R) bugfix support"
 51         depends on PPC_MPC52xx
 52         help
 53           Enable workarounds for original MPC5200 errata.  This is not required
 54           for MPC5200B based boards.
 55 
 56           It is safe to say 'Y' here
 57 
 58 config PPC_MPC5200_LPBFIFO
 59         tristate "MPC5200 LocalPlus bus FIFO driver"
 60         depends on PPC_MPC52xx && PPC_BESTCOMM
 61         select PPC_BESTCOMM_GEN_BD

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us