Version:  2.0.40 2.2.26 2.4.37 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17 3.18 3.19 4.0 4.1

Linux/arch/powerpc/Kconfig.debug

  1 menu "Kernel hacking"
  2 
  3 source "lib/Kconfig.debug"
  4 
  5 config PPC_DISABLE_WERROR
  6         bool "Don't build arch/powerpc code with -Werror"
  7         default n
  8         help
  9           This option tells the compiler NOT to build the code under
 10           arch/powerpc with the -Werror flag (which means warnings
 11           are treated as errors).
 12 
 13           Only enable this if you are hitting a build failure in the
 14           arch/powerpc code caused by a warning, and you don't feel
 15           inclined to fix it.
 16 
 17 config PPC_WERROR
 18         bool
 19         depends on !PPC_DISABLE_WERROR
 20         default y
 21 
 22 config PRINT_STACK_DEPTH
 23         int "Stack depth to print" if DEBUG_KERNEL
 24         default 64
 25         help
 26           This option allows you to set the stack depth that the kernel
 27           prints in stack traces. This can be useful if your display is
 28           too small and stack traces cause important information to
 29           scroll off the screen.
 30 
 31 config HCALL_STATS
 32         bool "Hypervisor call instrumentation"
 33         depends on PPC_PSERIES && DEBUG_FS && TRACEPOINTS
 34         help
 35           Adds code to keep track of the number of hypervisor calls made and
 36           the amount of time spent in hypervisor calls.  Wall time spent in
 37           each call is always calculated, and if available CPU cycles spent
 38           are also calculated.  A directory named hcall_inst is added at the
 39           root of the debugfs filesystem.  Within the hcall_inst directory
 40           are files that contain CPU specific call statistics.
 41 
 42           This option will add a small amount of overhead to all hypervisor
 43           calls.
 44 
 45 config PPC_EMULATED_STATS
 46         bool "Emulated instructions tracking"
 47         depends on DEBUG_FS
 48         help
 49           Adds code to keep track of the number of instructions that are
 50           emulated by the in-kernel emulator. Counters for the various classes
 51           of emulated instructions are available under
 52           powerpc/emulated_instructions/ in the root of the debugfs file
 53           system. Optionally (controlled by
 54           powerpc/emulated_instructions/do_warn in debugfs), rate-limited
 55           warnings can be printed to the console when instructions are
 56           emulated.
 57 
 58 config CODE_PATCHING_SELFTEST
 59         bool "Run self-tests of the code-patching code."
 60         depends on DEBUG_KERNEL
 61         default n
 62 
 63 config FTR_FIXUP_SELFTEST
 64         bool "Run self-tests of the feature-fixup code."
 65         depends on DEBUG_KERNEL
 66         default n
 67 
 68 config MSI_BITMAP_SELFTEST
 69         bool "Run self-tests of the MSI bitmap code."
 70         depends on DEBUG_KERNEL
 71         default n
 72 
 73 config XMON
 74         bool "Include xmon kernel debugger"
 75         depends on DEBUG_KERNEL
 76         help
 77           Include in-kernel hooks for the xmon kernel monitor/debugger.
 78           Unless you are intending to debug the kernel, say N here.
 79           Make sure to enable also CONFIG_BOOTX_TEXT on Macs. Otherwise
 80           nothing will appear on the screen (xmon writes directly to the
 81           framebuffer memory).
 82           The cmdline option 'xmon' or 'xmon=early' will drop into xmon
 83           very early during boot. 'xmon=on' will just enable the xmon
 84           debugger hooks.  'xmon=off' will disable the debugger hooks
 85           if CONFIG_XMON_DEFAULT is set.
 86           xmon will print a backtrace on the very first invocation.
 87           'xmon=nobt' will disable this autobacktrace.
 88 
 89 config XMON_DEFAULT
 90         bool "Enable xmon by default"
 91         depends on XMON
 92         help
 93           xmon is normally disabled unless booted with 'xmon=on'.
 94           Use 'xmon=off' to disable xmon init during runtime.
 95 
 96 config XMON_DISASSEMBLY
 97         bool "Include disassembly support in xmon"
 98         depends on XMON
 99         default y
100         help
101           Include support for disassembling in xmon. You probably want
102           to say Y here, unless you're building for a memory-constrained
103           system.
104 
105 config DEBUGGER
106         bool
107         depends on KGDB || XMON
108         default y
109 
110 config BDI_SWITCH
111         bool "Include BDI-2000 user context switcher"
112         depends on DEBUG_KERNEL && PPC32
113         help
114           Include in-kernel support for the Abatron BDI2000 debugger.
115           Unless you are intending to debug the kernel with one of these
116           machines, say N here.
117 
118 config BOOTX_TEXT
119         bool "Support for early boot text console (BootX or OpenFirmware only)"
120         depends on PPC_BOOK3S
121         help
122           Say Y here to see progress messages from the boot firmware in text
123           mode. Requires either BootX or Open Firmware.
124 
125 config PPC_EARLY_DEBUG
126         bool "Early debugging (dangerous)"
127         help
128           Say Y to enable some early debugging facilities that may be available
129           for your processor/board combination. Those facilities are hacks
130           intended to debug problems early during boot, this should not be
131           enabled in a production kernel.
132           Note that enabling this will also cause the kernel default log level
133           to be pushed to max automatically very early during boot
134 
135 choice
136         prompt "Early debugging console"
137         depends on PPC_EARLY_DEBUG
138         help
139           Use the selected console for early debugging. Careful, if you
140           enable debugging for the wrong type of machine your kernel
141           _will not boot_.
142 
143 config PPC_EARLY_DEBUG_BOOTX
144         bool "BootX or OpenFirmware"
145         depends on BOOTX_TEXT
146         help
147           Select this to enable early debugging for a machine using BootX
148           or OpenFirmware.
149 
150 config PPC_EARLY_DEBUG_LPAR
151         bool "LPAR HV Console"
152         depends on PPC_PSERIES
153         help
154           Select this to enable early debugging for a machine with a HVC
155           console on vterm 0.
156 
157 config PPC_EARLY_DEBUG_LPAR_HVSI
158         bool "LPAR HVSI Console"
159         depends on PPC_PSERIES
160         help
161           Select this to enable early debugging for a machine with a HVSI
162           console on a specified vterm.
163 
164 config PPC_EARLY_DEBUG_G5
165         bool "Apple G5"
166         depends on PPC_PMAC64
167         help
168           Select this to enable early debugging for Apple G5 machines.
169 
170 config PPC_EARLY_DEBUG_RTAS_PANEL
171         bool "RTAS Panel"
172         depends on PPC_RTAS
173         help
174           Select this to enable early debugging via the RTAS panel.
175 
176 config PPC_EARLY_DEBUG_RTAS_CONSOLE
177         bool "RTAS Console"
178         depends on PPC_RTAS
179         select UDBG_RTAS_CONSOLE
180         help
181           Select this to enable early debugging via the RTAS console.
182 
183 config PPC_EARLY_DEBUG_MAPLE
184         bool "Maple real mode"
185         depends on PPC_MAPLE
186         help
187           Select this to enable early debugging for Maple.
188 
189 config PPC_EARLY_DEBUG_PAS_REALMODE
190         bool "PA Semi real mode"
191         depends on PPC_PASEMI
192         help
193           Select this to enable early debugging for PA Semi.
194           Output will be on UART0.
195 
196 config PPC_EARLY_DEBUG_44x
197         bool "Early serial debugging for IBM/AMCC 44x CPUs"
198         depends on 44x
199         help
200           Select this to enable early debugging for IBM 44x chips via the
201           inbuilt serial port.  If you enable this, ensure you set
202           PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board.
203 
204 config PPC_EARLY_DEBUG_40x
205         bool "Early serial debugging for IBM/AMCC 40x CPUs"
206         depends on 40x
207         help
208           Select this to enable early debugging for IBM 40x chips via the
209           inbuilt serial port. This works on chips with a 16550 compatible
210           UART. Xilinx chips with uartlite cannot use this option.
211 
212 config PPC_EARLY_DEBUG_CPM
213         bool "Early serial debugging for Freescale CPM-based serial ports"
214         depends on SERIAL_CPM
215         select PIN_TLB if PPC_8xx
216         help
217           Select this to enable early debugging for Freescale chips
218           using a CPM-based serial port.  This assumes that the bootwrapper
219           has run, and set up the CPM in a particular way.
220 
221 config PPC_EARLY_DEBUG_USBGECKO
222         bool "Early debugging through the USB Gecko adapter"
223         depends on GAMECUBE_COMMON
224         select USBGECKO_UDBG
225         help
226           Select this to enable early debugging for Nintendo GameCube/Wii
227           consoles via an external USB Gecko adapter.
228 
229 config PPC_EARLY_DEBUG_PS3GELIC
230         bool "Early debugging through the PS3 Ethernet port"
231         depends on PPC_PS3
232         select PS3GELIC_UDBG
233         help
234           Select this to enable early debugging for the PlayStation3 via
235           UDP broadcasts sent out through the Ethernet port.
236 
237 config PPC_EARLY_DEBUG_OPAL_RAW
238         bool "OPAL raw console"
239         depends on HVC_OPAL
240         help
241           Select this to enable early debugging for the PowerNV platform
242           using a "raw" console
243 
244 config PPC_EARLY_DEBUG_OPAL_HVSI
245         bool "OPAL hvsi console"
246         depends on HVC_OPAL
247         help
248           Select this to enable early debugging for the PowerNV platform
249           using an "hvsi" console
250 
251 config PPC_EARLY_DEBUG_MEMCONS
252         bool "In memory console"
253         help
254           Select this to enable early debugging using an in memory console.
255           This console provides input and output buffers stored within the
256           kernel BSS and should be safe to select on any system. A debugger
257           can then be used to read kernel output or send input to the console.
258 endchoice
259 
260 config PPC_MEMCONS_OUTPUT_SIZE
261         int "In memory console output buffer size"
262         depends on PPC_EARLY_DEBUG_MEMCONS
263         default 4096
264         help
265           Selects the size of the output buffer (in bytes) of the in memory
266           console.
267 
268 config PPC_MEMCONS_INPUT_SIZE
269         int "In memory console input buffer size"
270         depends on PPC_EARLY_DEBUG_MEMCONS
271         default 128
272         help
273           Selects the size of the input buffer (in bytes) of the in memory
274           console.
275 
276 config PPC_EARLY_DEBUG_OPAL
277         def_bool y
278         depends on PPC_EARLY_DEBUG_OPAL_RAW || PPC_EARLY_DEBUG_OPAL_HVSI
279 
280 
281 config PPC_EARLY_DEBUG_HVSI_VTERMNO
282         hex "vterm number to use with early debug HVSI"
283         depends on PPC_EARLY_DEBUG_LPAR_HVSI
284         default "0x30000000"
285         help
286           You probably want 0x30000000 for your first serial port and
287           0x30000001 for your second one
288 
289 config PPC_EARLY_DEBUG_OPAL_VTERMNO
290         hex "vterm number to use with OPAL early debug"
291         depends on PPC_EARLY_DEBUG_OPAL
292         default "0"
293         help
294           This correspond to which /dev/hvcN you want to use for early
295           debug.
296 
297           On OPAL v2, this will be 0 for network console and 1 or 2 for
298           the machine built-in serial ports.
299 
300 config PPC_EARLY_DEBUG_44x_PHYSLOW
301         hex "Low 32 bits of early debug UART physical address"
302         depends on PPC_EARLY_DEBUG_44x
303         default "0x40000200"
304         help
305           You probably want 0x40000200 for ebony boards and
306           0x40000300 for taishan
307 
308 config PPC_EARLY_DEBUG_44x_PHYSHIGH
309         hex "EPRN of early debug UART physical address"
310         depends on PPC_EARLY_DEBUG_44x
311         default "0x1"
312 
313 config PPC_EARLY_DEBUG_40x_PHYSADDR
314         hex "Early debug UART physical address"
315         depends on PPC_EARLY_DEBUG_40x
316         default "0xef600300"
317 
318 config PPC_EARLY_DEBUG_CPM_ADDR
319         hex "CPM UART early debug transmit descriptor address"
320         depends on PPC_EARLY_DEBUG_CPM
321         default "0xfa202008" if PPC_EP88XC
322         default "0xf0001ff8" if CPM2
323         default "0xff002008" if CPM1
324         help
325           This specifies the address of the transmit descriptor
326           used for early debug output.  Because it is needed before
327           platform probing is done, all platforms selected must
328           share the same address.
329 
330 config STRICT_DEVMEM
331         def_bool y
332         prompt "Filter access to /dev/mem"
333         help
334           This option restricts access to /dev/mem.  If this option is
335           disabled, you allow userspace access to all memory, including
336           kernel and userspace memory. Accidental memory access is likely
337           to be disastrous.
338           Memory access is required for experts who want to debug the kernel.
339 
340           If you are unsure, say Y.
341 
342 config FAIL_IOMMU
343         bool "Fault-injection capability for IOMMU"
344         depends on FAULT_INJECTION
345         help
346           Provide fault-injection capability for IOMMU. Each device can
347           be selectively enabled via the fail_iommu property.
348 
349           If you are unsure, say N.
350 
351 endmenu

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us