Version:  2.0.40 2.2.26 2.4.37 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16 3.17

Linux/arch/mips/txx9/Kconfig

  1 config MACH_TX39XX
  2         bool
  3         select MACH_TXX9
  4         select SYS_HAS_CPU_TX39XX
  5 
  6 config MACH_TX49XX
  7         bool
  8         select MACH_TXX9
  9         select CEVT_R4K
 10         select CSRC_R4K
 11         select IRQ_CPU
 12         select SYS_HAS_CPU_TX49XX
 13         select SYS_SUPPORTS_64BIT_KERNEL
 14 
 15 config MACH_TXX9
 16         bool
 17         select DMA_NONCOHERENT
 18         select SWAP_IO_SPACE
 19         select SYS_HAS_EARLY_PRINTK
 20         select SYS_SUPPORTS_32BIT_KERNEL
 21         select SYS_SUPPORTS_LITTLE_ENDIAN
 22         select SYS_SUPPORTS_BIG_ENDIAN
 23         select HAVE_CLK
 24 
 25 config TOSHIBA_JMR3927
 26         bool "Toshiba JMR-TX3927 board"
 27         depends on MACH_TX39XX
 28         select SOC_TX3927
 29 
 30 config TOSHIBA_RBTX4927
 31         bool "Toshiba RBTX49[23]7 board"
 32         depends on MACH_TX49XX
 33         select SOC_TX4927
 34         # TX4937 is subset of TX4938
 35         select SOC_TX4938
 36         help
 37           This Toshiba board is based on the TX4927 processor. Say Y here to
 38           support this machine type
 39 
 40 config TOSHIBA_RBTX4938
 41         bool "Toshiba RBTX4938 board"
 42         depends on MACH_TX49XX
 43         select SOC_TX4938
 44         help
 45           This Toshiba board is based on the TX4938 processor. Say Y here to
 46           support this machine type
 47 
 48 config TOSHIBA_RBTX4939
 49         bool "Toshiba RBTX4939 board"
 50         depends on MACH_TX49XX
 51         select SOC_TX4939
 52         select TXX9_7SEGLED
 53         help
 54           This Toshiba board is based on the TX4939 processor. Say Y here to
 55           support this machine type
 56 
 57 config SOC_TX3927
 58         bool
 59         select CEVT_TXX9
 60         select HAS_TXX9_SERIAL
 61         select HW_HAS_PCI
 62         select IRQ_TXX9
 63         select GPIO_TXX9
 64 
 65 config SOC_TX4927
 66         bool
 67         select CEVT_TXX9
 68         select HAS_TXX9_SERIAL
 69         select HW_HAS_PCI
 70         select IRQ_TXX9
 71         select PCI_TX4927
 72         select GPIO_TXX9
 73         select HAS_TXX9_ACLC
 74 
 75 config SOC_TX4938
 76         bool
 77         select CEVT_TXX9
 78         select HAS_TXX9_SERIAL
 79         select HW_HAS_PCI
 80         select IRQ_TXX9
 81         select PCI_TX4927
 82         select GPIO_TXX9
 83         select HAS_TXX9_ACLC
 84 
 85 config SOC_TX4939
 86         bool
 87         select CEVT_TXX9
 88         select HAS_TXX9_SERIAL
 89         select HW_HAS_PCI
 90         select PCI_TX4927
 91         select HAS_TXX9_ACLC
 92 
 93 config TXX9_7SEGLED
 94         bool
 95 
 96 config TOSHIBA_FPCIB0
 97         bool "FPCIB0 Backplane Support"
 98         depends on PCI && MACH_TXX9
 99         select I8259
100 
101 config PICMG_PCI_BACKPLANE_DEFAULT
102         bool "Support for PICMG PCI Backplane"
103         depends on PCI && MACH_TXX9
104         default y if !TOSHIBA_FPCIB0
105 
106 if TOSHIBA_RBTX4938
107 
108 comment "Multiplex Pin Select"
109 choice
110         prompt "PIO[58:61]"
111         default TOSHIBA_RBTX4938_MPLEX_PIO58_61
112 
113 config TOSHIBA_RBTX4938_MPLEX_PIO58_61
114         bool "PIO"
115 config TOSHIBA_RBTX4938_MPLEX_NAND
116         bool "NAND"
117 config TOSHIBA_RBTX4938_MPLEX_ATA
118         bool "ATA"
119 config TOSHIBA_RBTX4938_MPLEX_KEEP
120         bool "Keep firmware settings"
121 
122 endchoice
123 
124 endif
125 
126 config PCI_TX4927
127         bool

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us