Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/arch/m68k/Kconfig.devices

  1 if MMU
  2 
  3 config ARCH_MAY_HAVE_PC_FDC
  4         bool
  5         depends on BROKEN && (Q40 || SUN3X)
  6         default y
  7 
  8 menu "Platform devices"
  9 
 10 config HEARTBEAT
 11         bool "Use power LED as a heartbeat" if AMIGA || APOLLO || ATARI || Q40
 12         default y if !AMIGA && !APOLLO && !ATARI && !Q40 && HP300
 13         help
 14           Use the power-on LED on your machine as a load meter.  The exact
 15           behavior is platform-dependent, but normally the flash frequency is
 16           a hyperbolic function of the 5-minute load average.
 17 
 18 # We have a dedicated heartbeat LED. :-)
 19 config PROC_HARDWARE
 20         bool "/proc/hardware support"
 21         help
 22           Say Y here to support the /proc/hardware file, which gives you
 23           access to information about the machine you're running on,
 24           including the model, CPU, MMU, clock speed, BogoMIPS rating,
 25           and memory size.
 26 
 27 config NATFEAT
 28         bool "ARAnyM emulator support"
 29         depends on ATARI
 30         help
 31           This option enables support for ARAnyM native features, such as
 32           access to a disk image as /dev/hda.
 33 
 34 config NFBLOCK
 35         tristate "NatFeat block device support"
 36         depends on BLOCK && NATFEAT
 37         help
 38           Say Y to include support for the ARAnyM NatFeat block device
 39           which allows direct access to the hard drives without using
 40           the hardware emulation.
 41 
 42 config NFCON
 43         tristate "NatFeat console driver"
 44         depends on TTY && NATFEAT
 45         help
 46           Say Y to include support for the ARAnyM NatFeat console driver
 47           which allows the console output to be redirected to the stderr
 48           output of ARAnyM.
 49 
 50 config NFETH
 51         tristate "NatFeat Ethernet support"
 52         depends on ETHERNET && NATFEAT
 53         help
 54           Say Y to include support for the ARAnyM NatFeat network device
 55           which will emulate a regular ethernet device while presenting an
 56           ethertap device to the host system.
 57 
 58 config ATARI_ETHERNAT
 59         bool "Atari EtherNAT Ethernet support"
 60         depends on ATARI
 61         ---help---
 62           Say Y to include support for the EtherNAT network adapter for the
 63           CT/60 extension port.
 64 
 65           To compile the actual ethernet driver, choose Y or M for the SMC91X
 66           option in the network device section; the module will be called smc91x.
 67 
 68 config ATARI_ETHERNEC
 69         bool "Atari EtherNEC Ethernet support"
 70         depends on ATARI_ROM_ISA
 71         ---help---
 72           Say Y to include support for the EtherNEC network adapter for the
 73           ROM port. The driver works by polling instead of interrupts, so it
 74           is quite slow.
 75 
 76           This driver also suppports the ethernet part of the NetUSBee ROM
 77           port combined Ethernet/USB adapter.
 78 
 79           To compile the actual ethernet driver, choose Y or M in for the NE2000
 80           option in the network device section; the module will be called ne.
 81 
 82 endmenu
 83 
 84 menu "Character devices"
 85 
 86 config ATARI_DSP56K
 87         tristate "Atari DSP56k support"
 88         depends on ATARI
 89         help
 90           If you want to be able to use the DSP56001 in Falcons, say Y. This
 91           driver is still experimental, and if you don't know what it is, or
 92           if you don't have this processor, just say N.
 93 
 94           To compile this driver as a module, choose M here.
 95 
 96 config AMIGA_BUILTIN_SERIAL
 97         tristate "Amiga builtin serial support"
 98         depends on AMIGA
 99         help
100           If you want to use your Amiga's built-in serial port in Linux,
101           answer Y.
102 
103           To compile this driver as a module, choose M here.
104 
105 config HPDCA
106         tristate "HP DCA serial support"
107         depends on DIO && SERIAL_8250
108         help
109           If you want to use the internal "DCA" serial ports on an HP300
110           machine, say Y here.
111 
112 config HPAPCI
113         tristate "HP APCI serial support"
114         depends on HP300 && SERIAL_8250
115         help
116           If you want to use the internal "APCI" serial ports on an HP400
117           machine, say Y here.
118 
119 config SERIAL_CONSOLE
120         bool "Support for serial port console"
121         depends on AMIGA_BUILTIN_SERIAL=y
122         ---help---
123           If you say Y here, it will be possible to use a serial port as the
124           system console (the system console is the device which receives all
125           kernel messages and warnings and which allows logins in single user
126           mode). This could be useful if some terminal or printer is connected
127           to that serial port.
128 
129           Even if you say Y here, the currently visible virtual console
130           (/dev/tty0) will still be used as the system console by default, but
131           you can alter that using a kernel command line option such as
132           "console=ttyS1". (Try "man bootparam" or see the documentation of
133           your boot loader about how to pass options to the kernel at boot
134           time.)
135 
136           If you don't have a graphical console and you say Y here, the
137           kernel will automatically use the first serial line, /dev/ttyS0, as
138           system console.
139 
140           If unsure, say N.
141 
142 endmenu
143 
144 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us