Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/arch/m68k/Kconfig.bus

  1 if MMU
  2 
  3 comment "Bus Support"
  4 
  5 config DIO
  6         bool "DIO bus support"
  7         depends on HP300
  8         default y
  9         help
 10           Say Y here to enable support for the "DIO" expansion bus used in
 11           HP300 machines. If you are using such a system you almost certainly
 12           want this.
 13 
 14 config NUBUS
 15         bool
 16         depends on MAC
 17         default y
 18 
 19 config ZORRO
 20         bool "Amiga Zorro (AutoConfig) bus support"
 21         depends on AMIGA
 22         help
 23           This enables support for the Zorro bus in the Amiga. If you have
 24           expansion cards in your Amiga that conform to the Amiga
 25           AutoConfig(tm) specification, say Y, otherwise N. Note that even
 26           expansion cards that do not fit in the Zorro slots but fit in e.g.
 27           the CPU slot may fall in this category, so you have to say Y to let
 28           Linux use these.
 29 
 30 config AMIGA_PCMCIA
 31         bool "Amiga 1200/600 PCMCIA support"
 32         depends on AMIGA
 33         help
 34           Include support in the kernel for pcmcia on Amiga 1200 and Amiga
 35           600. If you intend to use pcmcia cards say Y; otherwise say N.
 36 
 37 config ISA
 38         bool
 39         depends on Q40 || AMIGA_PCMCIA
 40         default y
 41         help
 42           Find out whether you have ISA slots on your motherboard.  ISA is the
 43           name of a bus system, i.e. the way the CPU talks to the other stuff
 44           inside your box.  Other bus systems are PCI, EISA, MicroChannel
 45           (MCA) or VESA.  ISA is an older system, now being displaced by PCI;
 46           newer boards don't support it.  If you have ISA, say Y, otherwise N.
 47 
 48 config ATARI_ROM_ISA
 49         bool "Atari ROM port ISA adapter support"
 50         depends on ATARI
 51         help
 52           This option enables support for the ROM port ISA adapter used to
 53           operate ISA cards on Atari. Only 8  bit cards are supported, and
 54           no interrupt lines are connected.
 55           The only driver currently using this adapter is the EtherNEC
 56           driver for RTL8019AS based NE2000 compatible network cards.
 57 
 58 config GENERIC_ISA_DMA
 59         def_bool ISA
 60 
 61 config PCI
 62         bool "PCI support"
 63         depends on M54xx
 64         help
 65           Enable the PCI bus. Support for the PCI bus hardware built into the
 66           ColdFire 547x and 548x processors.
 67 
 68 source "drivers/pci/Kconfig"
 69 
 70 source "drivers/zorro/Kconfig"
 71 
 72 endif
 73 
 74 if !MMU
 75 
 76 config ISA_DMA_API
 77         def_bool !M5272
 78 
 79 source "drivers/pcmcia/Kconfig"
 80 
 81 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us