Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/arch/blackfin/mach-bf537/Kconfig

  1 if (BF537 || BF534 || BF536)
  2 
  3 source "arch/blackfin/mach-bf537/boards/Kconfig"
  4 
  5 menu "BF537 Specific Configuration"
  6 
  7 comment "Interrupt Priority Assignment"
  8 menu "Priority"
  9 
 10 config IRQ_PLL_WAKEUP
 11         int "IRQ_PLL_WAKEUP"
 12         default 7
 13 config IRQ_DMA_ERROR
 14         int "IRQ_DMA_ERROR Generic"
 15         default 7
 16 config IRQ_ERROR
 17         int "IRQ_ERROR: PPI CAN MAC SPORT0 SPORT1 SPI UART0 UART1"
 18         default 11
 19 config IRQ_RTC
 20         int "IRQ_RTC"
 21         default 8
 22 config IRQ_PPI
 23         int "IRQ_PPI"
 24         default 8
 25 config IRQ_SPORT0_RX
 26         int "IRQ_SPORT0_RX"
 27         default 9
 28 config IRQ_SPORT0_TX
 29         int "IRQ_SPORT0_TX"
 30         default 9
 31 config IRQ_SPORT1_RX
 32         int "IRQ_SPORT1_RX"
 33         default 9
 34 config IRQ_SPORT1_TX
 35         int "IRQ_SPORT1_TX"
 36         default 9
 37 config IRQ_TWI
 38         int "IRQ_TWI"
 39         default 10
 40 config IRQ_SPI
 41         int "IRQ_SPI"
 42         default 10
 43 config IRQ_UART0_RX
 44         int "IRQ_UART0_RX"
 45         default 10
 46 config IRQ_UART0_TX
 47         int "IRQ_UART0_TX"
 48         default 10
 49 config IRQ_UART1_RX
 50         int "IRQ_UART1_RX"
 51         default 10
 52 config IRQ_UART1_TX
 53         int "IRQ_UART1_TX"
 54         default 10
 55 config IRQ_CAN_RX
 56         int "IRQ_CAN_RX"
 57         default 11
 58 config IRQ_CAN_TX
 59         int "IRQ_CAN_TX"
 60         default 11
 61 config IRQ_MAC_RX
 62         int "IRQ_MAC_RX"
 63         default 11
 64 config IRQ_MAC_TX
 65         int "IRQ_MAC_TX"
 66         default 11
 67 config IRQ_TIMER0
 68         int "IRQ_TIMER0"
 69         default 7 if TICKSOURCE_GPTMR0
 70         default 8
 71 config IRQ_TIMER1
 72         int "IRQ_TIMER1"
 73         default 12
 74 config IRQ_TIMER2
 75         int "IRQ_TIMER2"
 76         default 12
 77 config IRQ_TIMER3
 78         int "IRQ_TIMER3"
 79         default 12
 80 config IRQ_TIMER4
 81         int "IRQ_TIMER4"
 82         default 12
 83 config IRQ_TIMER5
 84         int "IRQ_TIMER5"
 85         default 12
 86 config IRQ_TIMER6
 87         int "IRQ_TIMER6"
 88         default 12
 89 config IRQ_TIMER7
 90         int "IRQ_TIMER7"
 91         default 12
 92 config IRQ_PROG_INTA
 93         int "IRQ_PROG_INTA"
 94         default 12
 95 config IRQ_PORTG_INTB
 96         int "IRQ_PORTG_INTB"
 97         default 12
 98 config IRQ_MEM_DMA0
 99         int "IRQ_MEM_DMA0"
100         default 13
101 config IRQ_MEM_DMA1
102         int "IRQ_MEM_DMA1"
103         default 13
104 config IRQ_WATCH
105         int "IRQ_WATCH"
106         default 13
107 
108         help
109           Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
110           This applies to all the above.  It is not recommended to assign the
111           highest priority number 7 to UART or any other device.
112 
113 endmenu
114 
115 endmenu
116 
117 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us