Version:  2.0.40 2.2.26 2.4.37 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

Linux/arch/blackfin/mach-bf518/Kconfig

  1 config BF51x
  2         def_bool y
  3         depends on (BF512 || BF514 || BF516 || BF518)
  4 
  5 if (BF51x)
  6 
  7 source "arch/blackfin/mach-bf518/boards/Kconfig"
  8 
  9 menu "BF518 Specific Configuration"
 10 
 11 comment "Alternative Multiplexing Scheme"
 12 
 13 choice
 14         prompt "PWM Channel Pins"
 15         default BF518_PWM_ALL_PORTF
 16         help
 17           Select pins used for the PWM channels:
 18             PWM_AH PWM_AL PWM_BH PWM_BL PWM_CH PWM_CL
 19 
 20           See the Hardware Reference Manual for more details.
 21 
 22 config BF518_PWM_ALL_PORTF
 23         bool "PF1 - PF6"
 24         help
 25           PF{1,2,3,4,5,6} <-> PWM_{AH,AL,BH,BL,CH,CL}
 26 
 27 config BF518_PWM_PORTF_PORTG
 28         bool "PF11 - PF14 / PG1 - PG2"
 29         help
 30           PF{11,12,13,14} <-> PWM_{AH,AL,BH,BL}
 31           PG{1,2} <-> PWM_{CH,CL}
 32 
 33 endchoice
 34 
 35 choice
 36         prompt "PWM Sync Pin"
 37         default BF518_PWM_SYNC_PF7
 38         help
 39           Select the pin used for PWM_SYNC.
 40 
 41           See the Hardware Reference Manual for more details.
 42 
 43 config BF518_PWM_SYNC_PF7
 44         bool "PF7"
 45 config BF518_PWM_SYNC_PF15
 46         bool "PF15"
 47 endchoice
 48 
 49 choice
 50         prompt "PWM Trip B Pin"
 51         default BF518_PWM_TRIPB_PG10
 52         help
 53           Select the pin used for PWM_TRIPB.
 54 
 55           See the Hardware Reference Manual for more details.
 56 
 57 config BF518_PWM_TRIPB_PG10
 58         bool "PG10"
 59 config BF518_PWM_TRIPB_PG14
 60         bool "PG14"
 61 endchoice
 62 
 63 choice
 64         prompt "PPI / Timer Pins"
 65         default BF518_PPI_TMR_PG5
 66         help
 67           Select pins used for PPI/Timer:
 68             PPICLK PPIFS1 PPIFS2
 69             TMRCLK TMR0 TMR1
 70 
 71           See the Hardware Reference Manual for more details.
 72 
 73 config BF518_PPI_TMR_PG5
 74         bool "PG5 - PG7"
 75         help
 76           PG{5,6,7} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
 77 
 78 config BF518_PPI_TMR_PG12
 79         bool "PG12 - PG14"
 80         help
 81           PG{12,13,14} <-> {PPICLK/TMRCLK,TMR0/PPIFS1,TMR1/PPIFS2}
 82 
 83 endchoice
 84 
 85 comment "Hysteresis/Schmitt Trigger Control"
 86 config BFIN_HYSTERESIS_CONTROL
 87         bool "Enable Hysteresis Control"
 88         help
 89           The ADSP-BF51x allows to control input hysteresis for Port F,
 90           Port G and Port H and other processor signal inputs.
 91           The Schmitt trigger enables can be set only for pin groups.
 92           Saying Y will overwrite the default reset or boot loader
 93           initialization.
 94 
 95 menu "PORT F"
 96         depends on BFIN_HYSTERESIS_CONTROL
 97 config GPIO_HYST_PORTF_0_7
 98         bool "Enable Hysteresis on PORTF {0...7}"
 99 config GPIO_HYST_PORTF_8_9
100         bool "Enable Hysteresis on PORTF {8, 9}"
101 config GPIO_HYST_PORTF_10
102         bool "Enable Hysteresis on PORTF 10"
103 config GPIO_HYST_PORTF_11
104         bool "Enable Hysteresis on PORTF 11"
105 config GPIO_HYST_PORTF_12_13
106         bool "Enable Hysteresis on PORTF {12, 13}"
107 config GPIO_HYST_PORTF_14_15
108         bool "Enable Hysteresis on PORTF {14, 15}"
109 endmenu
110 
111 menu "PORT G"
112         depends on BFIN_HYSTERESIS_CONTROL
113 config GPIO_HYST_PORTG_0
114         bool "Enable Hysteresis on PORTG 0"
115 config GPIO_HYST_PORTG_1_4
116         bool "Enable Hysteresis on PORTG {1...4}"
117 config GPIO_HYST_PORTG_5_6
118         bool "Enable Hysteresis on PORTG {5, 6}"
119 config GPIO_HYST_PORTG_7_8
120         bool "Enable Hysteresis on PORTG {7, 8}"
121 config GPIO_HYST_PORTG_9
122         bool "Enable Hysteresis on PORTG 9"
123 config GPIO_HYST_PORTG_10
124         bool "Enable Hysteresis on PORTG 10"
125 config GPIO_HYST_PORTG_11_13
126         bool "Enable Hysteresis on PORTG {11...13}"
127 config GPIO_HYST_PORTG_14_15
128         bool "Enable Hysteresis on PORTG {14, 15}"
129 endmenu
130 
131 menu "PORT H"
132         depends on BFIN_HYSTERESIS_CONTROL
133 config GPIO_HYST_PORTH_0_7
134         bool "Enable Hysteresis on PORTH {0...7}"
135 
136 endmenu
137 
138 menu "None-GPIO"
139         depends on BFIN_HYSTERESIS_CONTROL
140 config NONEGPIO_HYST_NMI_RST_BMODE
141         bool "Enable Hysteresis on {NMI, RESET, BMODE}"
142 config NONEGPIO_HYST_JTAG
143         bool "Enable Hysteresis on JTAG"
144 endmenu
145 
146 comment "Interrupt Priority Assignment"
147 menu "Priority"
148 
149 config IRQ_PLL_WAKEUP
150         int "IRQ_PLL_WAKEUP"
151         default 7
152 config IRQ_DMA0_ERROR
153         int "IRQ_DMA0_ERROR"
154         default 7
155 config IRQ_DMAR0_BLK
156         int "IRQ_DMAR0_BLK"
157         default 7
158 config IRQ_DMAR1_BLK
159         int "IRQ_DMAR1_BLK"
160         default 7
161 config IRQ_DMAR0_OVR
162         int "IRQ_DMAR0_OVR"
163         default 7
164 config IRQ_DMAR1_OVR
165         int "IRQ_DMAR1_OVR"
166         default 7
167 config IRQ_PPI_ERROR
168         int "IRQ_PPI_ERROR"
169         default 7
170 config IRQ_MAC_ERROR
171         int "IRQ_MAC_ERROR"
172         default 7
173 config IRQ_SPORT0_ERROR
174         int "IRQ_SPORT0_ERROR"
175         default 7
176 config IRQ_SPORT1_ERROR
177         int "IRQ_SPORT1_ERROR"
178         default 7
179 config IRQ_PTP_ERROR
180         int "IRQ_PTP_ERROR"
181         default 7
182 config IRQ_UART0_ERROR
183         int "IRQ_UART0_ERROR"
184         default 7
185 config IRQ_UART1_ERROR
186         int "IRQ_UART1_ERROR"
187         default 7
188 config IRQ_RTC
189         int "IRQ_RTC"
190         default 8
191 config IRQ_PPI
192         int "IRQ_PPI"
193         default 8
194 config IRQ_SPORT0_RX
195         int "IRQ_SPORT0_RX"
196         default 9
197 config IRQ_SPORT0_TX
198         int "IRQ_SPORT0_TX"
199         default 9
200 config IRQ_SPORT1_RX
201         int "IRQ_SPORT1_RX"
202         default 9
203 config IRQ_SPORT1_TX
204         int "IRQ_SPORT1_TX"
205         default 9
206 config IRQ_TWI
207         int "IRQ_TWI"
208         default 10
209 config IRQ_SPI0
210         int "IRQ_SPI"
211         default 10
212 config IRQ_UART0_RX
213         int "IRQ_UART0_RX"
214         default 10
215 config IRQ_UART0_TX
216         int "IRQ_UART0_TX"
217         default 10
218 config IRQ_UART1_RX
219         int "IRQ_UART1_RX"
220         default 10
221 config IRQ_UART1_TX
222         int "IRQ_UART1_TX"
223         default 10
224 config IRQ_OPTSEC
225         int "IRQ_OPTSEC"
226         default 11
227 config IRQ_CNT
228         int "IRQ_CNT"
229         default 11
230 config IRQ_MAC_RX
231         int "IRQ_MAC_RX"
232         default 11
233 config IRQ_PORTH_INTA
234         int "IRQ_PORTH_INTA"
235         default 11
236 config IRQ_MAC_TX
237         int "IRQ_MAC_TX/NFC"
238         default 11
239 config IRQ_PORTH_INTB
240         int "IRQ_PORTH_INTB"
241         default 11
242 config IRQ_TIMER0
243         int "IRQ_TIMER0"
244         default 7 if TICKSOURCE_GPTMR0
245         default 8
246 config IRQ_TIMER1
247         int "IRQ_TIMER1"
248         default 12
249 config IRQ_TIMER2
250         int "IRQ_TIMER2"
251         default 12
252 config IRQ_TIMER3
253         int "IRQ_TIMER3"
254         default 12
255 config IRQ_TIMER4
256         int "IRQ_TIMER4"
257         default 12
258 config IRQ_TIMER5
259         int "IRQ_TIMER5"
260         default 12
261 config IRQ_TIMER6
262         int "IRQ_TIMER6"
263         default 12
264 config IRQ_TIMER7
265         int "IRQ_TIMER7"
266         default 12
267 config IRQ_PORTG_INTA
268         int "IRQ_PORTG_INTA"
269         default 12
270 config IRQ_PORTG_INTB
271         int "IRQ_PORTG_INTB"
272         default 12
273 config IRQ_MEM_DMA0
274         int "IRQ_MEM_DMA0"
275         default 13
276 config IRQ_MEM_DMA1
277         int "IRQ_MEM_DMA1"
278         default 13
279 config IRQ_WATCH
280         int "IRQ_WATCH"
281         default 13
282 config IRQ_PORTF_INTA
283         int "IRQ_PORTF_INTA"
284         default 13
285 config IRQ_PORTF_INTB
286         int "IRQ_PORTF_INTB"
287         default 13
288 config IRQ_SPI0_ERROR
289         int "IRQ_SPI0_ERROR"
290         default 7
291 config IRQ_SPI1_ERROR
292         int "IRQ_SPI1_ERROR"
293         default 7
294 config IRQ_RSI_INT0
295         int "IRQ_RSI_INT0"
296         default 7
297 config IRQ_RSI_INT1
298         int "IRQ_RSI_INT1"
299         default 7
300 config IRQ_PWM_TRIP
301         int "IRQ_PWM_TRIP"
302         default 10
303 config IRQ_PWM_SYNC
304         int "IRQ_PWM_SYNC"
305         default 10
306 config IRQ_PTP_STAT
307         int "IRQ_PTP_STAT"
308         default 10
309 
310         help
311           Enter the priority numbers between 7-13 ONLY.  Others are Reserved.
312           This applies to all the above.  It is not recommended to assign the
313           highest priority number 7 to UART or any other device.
314 
315 endmenu
316 
317 endmenu
318 
319 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us