Version:  2.0.40 2.2.26 2.4.37 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15 3.16

Linux/arch/arm/mach-s5p64x0/Kconfig

  1 # arch/arm/mach-s5p64x0/Kconfig
  2 #
  3 # Copyright (c) 2009-2010 Samsung Electronics Co., Ltd.
  4 #               http://www.samsung.com/
  5 #
  6 # Licensed under GPLv2
  7 
  8 if ARCH_S5P64X0
  9 
 10 config CPU_S5P6440
 11         bool
 12         select ARM_AMBA
 13         select PL330_DMA if DMADEVICES
 14         select S5P_SLEEP if PM
 15         select SAMSUNG_WAKEMASK if PM
 16         help
 17           Enable S5P6440 CPU support
 18 
 19 config CPU_S5P6450
 20         bool
 21         select ARM_AMBA
 22         select PL330_DMA if DMADEVICES
 23         select S5P_SLEEP if PM
 24         select SAMSUNG_WAKEMASK if PM
 25         help
 26           Enable S5P6450 CPU support
 27 
 28 config S5P64X0_SETUP_FB_24BPP
 29         bool
 30         help
 31           Common setup code for S5P64X0 based boards with a LCD display
 32           through RGB interface.
 33 
 34 config S5P64X0_SETUP_I2C1
 35         bool
 36         help
 37           Common setup code for i2c bus 1.
 38 
 39 config S5P64X0_SETUP_SPI
 40         bool
 41         help
 42           Common setup code for SPI GPIO configurations
 43 
 44 config S5P64X0_SETUP_SDHCI_GPIO
 45         bool
 46         help
 47           Common setup code for SDHCI gpio.
 48 
 49 # machine support
 50 
 51 config MACH_SMDK6440
 52         bool "SMDK6440"
 53         select CPU_S5P6440
 54         select S3C_DEV_FB
 55         select S3C_DEV_HSMMC
 56         select S3C_DEV_HSMMC1
 57         select S3C_DEV_HSMMC2
 58         select S3C_DEV_I2C1
 59         select S3C_DEV_RTC
 60         select S3C_DEV_WDT
 61         select S5P64X0_SETUP_FB_24BPP
 62         select S5P64X0_SETUP_I2C1
 63         select S5P64X0_SETUP_SDHCI_GPIO
 64         select SAMSUNG_DEV_ADC
 65         select SAMSUNG_DEV_BACKLIGHT
 66         select SAMSUNG_DEV_PWM
 67         select SAMSUNG_DEV_TS
 68         help
 69           Machine support for the Samsung SMDK6440
 70 
 71 config MACH_SMDK6450
 72         bool "SMDK6450"
 73         select CPU_S5P6450
 74         select S3C_DEV_FB
 75         select S3C_DEV_HSMMC
 76         select S3C_DEV_HSMMC1
 77         select S3C_DEV_HSMMC2
 78         select S3C_DEV_I2C1
 79         select S3C_DEV_RTC
 80         select S3C_DEV_WDT
 81         select S5P64X0_SETUP_FB_24BPP
 82         select S5P64X0_SETUP_I2C1
 83         select S5P64X0_SETUP_SDHCI_GPIO
 84         select SAMSUNG_DEV_ADC
 85         select SAMSUNG_DEV_BACKLIGHT
 86         select SAMSUNG_DEV_PWM
 87         select SAMSUNG_DEV_TS
 88         help
 89           Machine support for the Samsung SMDK6450
 90 
 91 menu "Use 8-bit SDHCI bus width"
 92 
 93 config S5P64X0_SD_CH1_8BIT
 94         bool "SDHCI Channel 1 (Slot 1)"
 95         depends on MACH_SMDK6450 || MACH_SMDK6440
 96         help
 97           Support SDHCI Channel 1 8-bit bus.
 98           If selected, Channel 2 is disabled.
 99 
100 endmenu
101 
102 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us