Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/arch/arm/mach-ixp4xx/Kconfig

  1 if ARCH_IXP4XX
  2 
  3 menu "Intel IXP4xx Implementation Options"
  4 
  5 comment "IXP4xx Platforms"
  6 
  7 config MACH_NSLU2
  8         bool
  9         prompt "Linksys NSLU2"
 10         select PCI
 11         help
 12           Say 'Y' here if you want your kernel to support Linksys's
 13           NSLU2 NAS device. For more information on this platform,
 14           see http://www.nslu2-linux.org
 15 
 16 config MACH_AVILA
 17         bool "Avila"
 18         select PCI
 19         help
 20           Say 'Y' here if you want your kernel to support the Gateworks
 21           Avila Network Platform. For more information on this platform,
 22           see <file:Documentation/arm/IXP4xx>.
 23 
 24 config MACH_LOFT
 25     bool "Loft"
 26     depends on MACH_AVILA
 27     help
 28           Say 'Y' here if you want your kernel to support the Giant
 29           Shoulder Inc Loft board (a minor variation on the standard
 30           Gateworks Avila Network Platform).
 31 
 32 config ARCH_ADI_COYOTE
 33         bool "Coyote"
 34         select PCI
 35         help
 36           Say 'Y' here if you want your kernel to support the ADI 
 37           Engineering Coyote Gateway Reference Platform. For more
 38           information on this platform, see <file:Documentation/arm/IXP4xx>.
 39 
 40 config MACH_GATEWAY7001
 41         bool "Gateway 7001"
 42         select PCI
 43         help
 44           Say 'Y' here if you want your kernel to support Gateway's
 45           7001 Access Point. For more information on this platform,
 46           see http://openwrt.org
 47 
 48 config MACH_WG302V2
 49         bool "Netgear WG302 v2 / WAG302 v2"
 50         select PCI
 51         help
 52           Say 'Y' here if you want your kernel to support Netgear's
 53           WG302 v2 or WAG302 v2 Access Points. For more information
 54           on this platform, see http://openwrt.org
 55 
 56 config ARCH_IXDP425
 57         bool "IXDP425"
 58         help
 59           Say 'Y' here if you want your kernel to support Intel's 
 60           IXDP425 Development Platform (Also known as Richfield).  
 61           For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 62 
 63 config MACH_IXDPG425
 64         bool "IXDPG425"
 65         help
 66           Say 'Y' here if you want your kernel to support Intel's
 67           IXDPG425 Development Platform (Also known as Montajade).
 68           For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 69 
 70 config MACH_IXDP465
 71         bool "IXDP465"
 72         help
 73           Say 'Y' here if you want your kernel to support Intel's
 74           IXDP465 Development Platform (Also known as BMP).
 75           For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 76 
 77 config MACH_GORAMO_MLR
 78         bool "GORAMO Multi Link Router"
 79         help
 80           Say 'Y' here if you want your kernel to support GORAMO
 81           MultiLink router.
 82 
 83 config MACH_KIXRP435
 84         bool "KIXRP435"
 85         help
 86           Say 'Y' here if you want your kernel to support Intel's
 87           KIXRP435 Reference Platform.
 88           For more information on this platform, see <file:Documentation/arm/IXP4xx>.
 89 
 90 #
 91 # IXCDP1100 is the exact same HW as IXDP425, but with a different machine 
 92 # number from the bootloader due to marketing monkeys, so we just enable it 
 93 # by default if IXDP425 is enabled.
 94 #
 95 config ARCH_IXCDP1100
 96         bool 
 97         depends on ARCH_IXDP425
 98         default y
 99 
100 config ARCH_PRPMC1100
101         bool "PrPMC1100"
102         help
103           Say 'Y' here if you want your kernel to support the Motorola
104           PrPCM1100 Processor Mezanine Module. For more information on
105           this platform, see <file:Documentation/arm/IXP4xx>.
106 
107 config MACH_NAS100D
108         bool
109         prompt "NAS100D"
110         select PCI
111         help
112           Say 'Y' here if you want your kernel to support Iomega's
113           NAS 100d device. For more information on this platform,
114           see http://www.nslu2-linux.org/wiki/NAS100d/HomePage
115 
116 config MACH_DSMG600
117         bool
118         prompt "D-Link DSM-G600 RevA"
119         select PCI
120         help
121           Say 'Y' here if you want your kernel to support D-Link's
122           DSM-G600 RevA device. For more information on this platform,
123           see http://www.nslu2-linux.org/wiki/DSMG600/HomePage
124 
125 config  ARCH_IXDP4XX
126         bool
127         depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
128         default y
129 
130 config MACH_FSG
131         bool
132         prompt "Freecom FSG-3"
133         select PCI
134         help
135           Say 'Y' here if you want your kernel to support Freecom's
136           FSG-3 device. For more information on this platform,
137           see http://www.nslu2-linux.org/wiki/FSG3/HomePage
138 
139 config MACH_ARCOM_VULCAN
140         bool
141         prompt "Arcom/Eurotech Vulcan"
142         select PCI
143         help
144           Say 'Y' here if you want your kernel to support Arcom's
145           Vulcan board.
146 
147 #
148 # Certain registers and IRQs are only enabled if supporting IXP465 CPUs
149 #
150 config CPU_IXP46X
151         bool
152         depends on MACH_IXDP465
153         default y
154 
155 config CPU_IXP43X
156         bool
157         depends on MACH_KIXRP435
158         default y
159 
160 config MACH_GTWX5715
161         bool "Gemtek WX5715 (Linksys WRV54G)"
162         depends on ARCH_IXP4XX
163         select PCI
164         help
165                 This board is currently inside the Linksys WRV54G Gateways.
166 
167                 IXP425 - 266mhz
168                 32mb SDRAM
169                 8mb Flash
170                 miniPCI slot 0 does not have a card connector soldered to the board
171                 miniPCI slot 1 has an ISL3880 802.11g card (Prism54)
172                 npe0 is connected to a Kendin KS8995M Switch (4 ports)
173                 npe1 is the "wan" port
174                 "Console" UART is available on J11 as console
175                 "High Speed" UART is n/c (as far as I can tell)
176                 20 Pin ARM/Xscale JTAG interface on J2
177 
178 config MACH_DEVIXP
179         bool "Omicron DEVIXP"
180         help
181           Say 'Y' here if you want your kernel to support the DEVIXP
182           board from OMICRON electronics GmbH.
183 
184 config MACH_MICCPT
185         bool "Omicron MICCPT"
186         select PCI
187         help
188           Say 'Y' here if you want your kernel to support the MICCPT
189           board from OMICRON electronics GmbH.
190 
191 config MACH_MIC256
192         bool "Omicron MIC256"
193         help
194           Say 'Y' here if you want your kernel to support the MIC256
195           board from OMICRON electronics GmbH.
196 
197 comment "IXP4xx Options"
198 
199 config IXP4XX_INDIRECT_PCI
200         bool "Use indirect PCI memory access"
201         depends on PCI
202         help
203           IXP4xx provides two methods of accessing PCI memory space:
204 
205           1) A direct mapped window from 0x48000000 to 0x4BFFFFFF (64MB).
206              To access PCI via this space, we simply ioremap() the BAR
207              into the kernel and we can use the standard read[bwl]/write[bwl]
208              macros. This is the preferred method due to speed but it
209              limits the system to just 64MB of PCI memory. This can be
210              problematic if using video cards and other memory-heavy devices.
211 
212           2) If > 64MB of memory space is required, the IXP4xx can be
213              configured to use indirect registers to access the whole PCI
214              memory space. This currently allows for up to 1 GB (0x10000000
215              to 0x4FFFFFFF) of memory on the bus. The disadvantage of this
216              is that every PCI access requires three local register accesses
217              plus a spinlock, but in some cases the performance hit is
218              acceptable. In addition, you cannot mmap() PCI devices in this
219              case due to the indirect nature of the PCI window.
220 
221           By default, the direct method is used. Choose this option if you
222           need to use the indirect method instead. If you don't know
223           what you need, leave this option unselected.
224 
225 config IXP4XX_QMGR
226         tristate "IXP4xx Queue Manager support"
227         help
228           This driver supports IXP4xx built-in hardware queue manager
229           and is automatically selected by Ethernet and HSS drivers.
230 
231 config IXP4XX_NPE
232         tristate "IXP4xx Network Processor Engine support"
233         select FW_LOADER
234         help
235           This driver supports IXP4xx built-in network coprocessors
236           and is automatically selected by Ethernet and HSS drivers.
237 
238 endmenu
239 
240 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us