Version:  2.0.40 2.2.26 2.4.37 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14 3.15

Linux/arch/arm/mach-ep93xx/Kconfig

  1 if ARCH_EP93XX
  2 
  3 menu "Cirrus EP93xx Implementation Options"
  4 
  5 config EP93XX_SOC_COMMON
  6         bool
  7         default y
  8         select SOC_BUS
  9         select LEDS_GPIO_REGISTER
 10 
 11 config CRUNCH
 12         bool "Support for MaverickCrunch"
 13         help
 14           Enable kernel support for MaverickCrunch.
 15 
 16 comment "EP93xx Platforms"
 17 
 18 choice
 19         prompt "EP93xx first SDRAM bank selection"
 20         default EP93XX_SDCE3_SYNC_PHYS_OFFSET
 21 
 22 config EP93XX_SDCE3_SYNC_PHYS_OFFSET
 23         bool "0x00000000 - SDCE3/SyncBoot"
 24         help
 25           Select this option if you want support for EP93xx boards with the
 26           first SDRAM bank at 0x00000000.
 27 
 28 config EP93XX_SDCE0_PHYS_OFFSET
 29         bool "0xc0000000 - SDCEO"
 30         help
 31           Select this option if you want support for EP93xx boards with the
 32           first SDRAM bank at 0xc0000000.
 33 
 34 config EP93XX_SDCE1_PHYS_OFFSET
 35         bool "0xd0000000 - SDCE1"
 36         help
 37           Select this option if you want support for EP93xx boards with the
 38           first SDRAM bank at 0xd0000000.
 39 
 40 config EP93XX_SDCE2_PHYS_OFFSET
 41         bool "0xe0000000 - SDCE2"
 42         help
 43           Select this option if you want support for EP93xx boards with the
 44           first SDRAM bank at 0xe0000000.
 45 
 46 config EP93XX_SDCE3_ASYNC_PHYS_OFFSET
 47         bool "0xf0000000 - SDCE3/AsyncBoot"
 48         help
 49           Select this option if you want support for EP93xx boards with the
 50           first SDRAM bank at 0xf0000000.
 51 
 52 endchoice
 53 
 54 config MACH_ADSSPHERE
 55         bool "Support ADS Sphere"
 56         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 57         help
 58           Say 'Y' here if you want your kernel to support the ADS
 59           Sphere board.
 60 
 61 config MACH_EDB93XX
 62         bool
 63 
 64 config MACH_EDB9301
 65         bool "Support Cirrus Logic EDB9301"
 66         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 67         select MACH_EDB93XX
 68         help
 69           Say 'Y' here if you want your kernel to support the Cirrus
 70           Logic EDB9301 Evaluation Board.
 71 
 72 config MACH_EDB9302
 73         bool "Support Cirrus Logic EDB9302"
 74         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 75         select MACH_EDB93XX
 76         help
 77           Say 'Y' here if you want your kernel to support the Cirrus
 78           Logic EDB9302 Evaluation Board.
 79 
 80 config MACH_EDB9302A
 81         bool "Support Cirrus Logic EDB9302A"
 82         depends on EP93XX_SDCE0_PHYS_OFFSET
 83         select MACH_EDB93XX
 84         help
 85           Say 'Y' here if you want your kernel to support the Cirrus
 86           Logic EDB9302A Evaluation Board.
 87 
 88 config MACH_EDB9307
 89         bool "Support Cirrus Logic EDB9307"
 90         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
 91         select MACH_EDB93XX
 92         help
 93           Say 'Y' here if you want your kernel to support the Cirrus
 94           Logic EDB9307 Evaluation Board.
 95 
 96 config MACH_EDB9307A
 97         bool "Support Cirrus Logic EDB9307A"
 98         depends on EP93XX_SDCE0_PHYS_OFFSET
 99         select MACH_EDB93XX
100         help
101           Say 'Y' here if you want your kernel to support the Cirrus
102           Logic EDB9307A Evaluation Board.
103 
104 config MACH_EDB9312
105         bool "Support Cirrus Logic EDB9312"
106         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
107         select MACH_EDB93XX
108         help
109           Say 'Y' here if you want your kernel to support the Cirrus
110           Logic EDB9312 Evaluation Board.
111 
112 config MACH_EDB9315
113         bool "Support Cirrus Logic EDB9315"
114         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
115         select MACH_EDB93XX
116         help
117           Say 'Y' here if you want your kernel to support the Cirrus
118           Logic EDB9315 Evaluation Board.
119 
120 config MACH_EDB9315A
121         bool "Support Cirrus Logic EDB9315A"
122         depends on EP93XX_SDCE0_PHYS_OFFSET
123         select MACH_EDB93XX
124         help
125           Say 'Y' here if you want your kernel to support the Cirrus
126           Logic EDB9315A Evaluation Board.
127 
128 config MACH_GESBC9312
129         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
130         bool "Support Glomation GESBC-9312-sx"
131         help
132           Say 'Y' here if you want your kernel to support the Glomation
133           GESBC-9312-sx board.
134 
135 config MACH_MICRO9
136         bool
137 
138 config MACH_MICRO9H
139         bool "Support Contec Micro9-High"
140         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
141         select MACH_MICRO9
142         help
143           Say 'Y' here if you want your kernel to support the
144           Contec Micro9-High board.
145 
146 config MACH_MICRO9M
147         bool "Support Contec Micro9-Mid"
148         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
149         select MACH_MICRO9
150         help
151           Say 'Y' here if you want your kernel to support the
152           Contec Micro9-Mid board.
153 
154 config MACH_MICRO9L
155         bool "Support Contec Micro9-Lite"
156         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
157         select MACH_MICRO9
158         help
159           Say 'Y' here if you want your kernel to support the
160           Contec Micro9-Lite board.
161 
162 config MACH_MICRO9S
163         bool "Support Contec Micro9-Slim"
164         depends on EP93XX_SDCE3_ASYNC_PHYS_OFFSET
165         select MACH_MICRO9
166         help
167           Say 'Y' here if you want your kernel to support the
168           Contec Micro9-Slim board.
169 
170 config MACH_SIM_ONE
171         bool "Support Simplemachines Sim.One board"
172         depends on EP93XX_SDCE0_PHYS_OFFSET
173         help
174           Say 'Y' here if you want your kernel to support the
175           Simplemachines Sim.One board.
176 
177 config MACH_SNAPPER_CL15
178         bool "Support Bluewater Systems Snapper CL15 Module"
179         depends on EP93XX_SDCE0_PHYS_OFFSET
180         help
181           Say 'Y' here if you want your kernel to support the Bluewater
182           Systems Snapper CL15 Module.
183 
184 config MACH_TS72XX
185         bool "Support Technologic Systems TS-72xx SBC"
186         depends on EP93XX_SDCE3_SYNC_PHYS_OFFSET
187         help
188           Say 'Y' here if you want your kernel to support the
189           Technologic Systems TS-72xx board.
190 
191 config MACH_VISION_EP9307
192         bool "Support Vision Engraving Systems EP9307 SoM"
193         depends on EP93XX_SDCE0_PHYS_OFFSET
194         help
195           Say 'Y' here if you want your kernel to support the
196           Vision Engraving Systems EP9307 SoM.
197 
198 endmenu
199 
200 endif

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us