Version:  2.6.34 2.6.35 2.6.36 2.6.37 2.6.38 2.6.39 3.0 3.1 3.2 3.3 3.4 3.5 3.6 3.7 3.8 3.9 3.10 3.11 3.12 3.13 3.14

Linux/arch/arm/mach-at91/Kconfig.non_dt

  1 menu "Atmel Non-DT world"
  2 
  3 config HAVE_AT91_DATAFLASH_CARD
  4         bool
  5 
  6 choice
  7         prompt "Atmel AT91 Processor Devices for non DT boards"
  8 
  9 config ARCH_AT91_NONE
 10         bool "None"
 11 
 12 config ARCH_AT91RM9200
 13         bool "AT91RM9200"
 14         select SOC_AT91RM9200
 15         select AT91_USE_OLD_CLK
 16 
 17 config ARCH_AT91SAM9260
 18         bool "AT91SAM9260 or AT91SAM9XE or AT91SAM9G20"
 19         select SOC_AT91SAM9260
 20         select AT91_USE_OLD_CLK
 21 
 22 config ARCH_AT91SAM9261
 23         bool "AT91SAM9261 or AT91SAM9G10"
 24         select SOC_AT91SAM9261
 25         select AT91_USE_OLD_CLK
 26 
 27 config ARCH_AT91SAM9263
 28         bool "AT91SAM9263"
 29         select SOC_AT91SAM9263
 30         select AT91_USE_OLD_CLK
 31 
 32 config ARCH_AT91SAM9RL
 33         bool "AT91SAM9RL"
 34         select SOC_AT91SAM9RL
 35         select AT91_USE_OLD_CLK
 36 
 37 config ARCH_AT91SAM9G45
 38         bool "AT91SAM9G45"
 39         select SOC_AT91SAM9G45
 40         select AT91_USE_OLD_CLK
 41 
 42 config ARCH_AT91X40
 43         bool "AT91x40"
 44         depends on !MMU
 45         select ARCH_USES_GETTIMEOFFSET
 46         select MULTI_IRQ_HANDLER
 47         select SPARSE_IRQ
 48 
 49 endchoice
 50 
 51 config ARCH_AT91SAM9G20
 52         bool
 53         select ARCH_AT91SAM9260
 54 
 55 config ARCH_AT91SAM9G10
 56         bool
 57         select ARCH_AT91SAM9261
 58 
 59 # ----------------------------------------------------------
 60 
 61 if ARCH_AT91RM9200
 62 
 63 comment "AT91RM9200 Board Type"
 64 
 65 config MACH_ONEARM
 66         bool "Ajeco 1ARM Single Board Computer"
 67         help
 68           Select this if you are using Ajeco's 1ARM Single Board Computer.
 69           <http://www.ajeco.fi/>
 70 
 71 config MACH_AT91RM9200EK
 72         bool "Atmel AT91RM9200-EK Evaluation Kit"
 73         select HAVE_AT91_DATAFLASH_CARD
 74         help
 75           Select this if you are using Atmel's AT91RM9200-EK Evaluation Kit.
 76           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3507>
 77 
 78 config MACH_CSB337
 79         bool "Cogent CSB337"
 80         help
 81           Select this if you are using Cogent's CSB337 board.
 82           <http://www.cogcomp.com/csb_csb337.htm>
 83 
 84 config MACH_CSB637
 85         bool "Cogent CSB637"
 86         help
 87           Select this if you are using Cogent's CSB637 board.
 88           <http://www.cogcomp.com/csb_csb637.htm>
 89 
 90 config MACH_CARMEVA
 91         bool "Conitec ARM&EVA"
 92         help
 93           Select this if you are using Conitec's AT91RM9200-MCU-Module.
 94           <http://www.conitec.net/english/linuxboard.php>
 95 
 96 config MACH_ATEB9200
 97         bool "Embest ATEB9200"
 98         help
 99           Select this if you are using Embest's ATEB9200 board.
100           <http://www.embedinfo.com/english/product/ATEB9200.asp>
101 
102 config MACH_KB9200
103         bool "KwikByte KB920x"
104         help
105           Select this if you are using KwikByte's KB920x board.
106           <http://www.kwikbyte.com/KB9202.html>
107 
108 config MACH_PICOTUX2XX
109         bool "picotux 200"
110         help
111           Select this if you are using a picotux 200.
112           <http://www.picotux.com/>
113 
114 config MACH_KAFA
115         bool "Sperry-Sun KAFA board"
116         help
117           Select this if you are using Sperry-Sun's KAFA board.
118 
119 config MACH_ECBAT91
120         bool "emQbit ECB_AT91 SBC"
121         select HAVE_AT91_DATAFLASH_CARD
122         help
123           Select this if you are using emQbit's ECB_AT91 board.
124           <http://wiki.emqbit.com/free-ecb-at91>
125 
126 config MACH_YL9200
127         bool "ucDragon YL-9200"
128         help
129           Select this if you are using the ucDragon YL-9200 board.
130 
131 config MACH_CPUAT91
132         bool "Eukrea CPUAT91"
133         help
134           Select this if you are using the Eukrea Electromatique's
135           CPUAT91 board <http://www.eukrea.com/>.
136 
137 config MACH_ECO920
138         bool "eco920"
139         help
140           Select this if you are using the eco920 board
141 
142 config MACH_RSI_EWS
143         bool "RSI Embedded Webserver"
144         depends on ARCH_AT91RM9200
145         help
146           Select this if you are using RSIs EWS board.
147 endif
148 
149 # ----------------------------------------------------------
150 
151 if ARCH_AT91SAM9260
152 
153 comment "AT91SAM9260 Variants"
154 
155 comment "AT91SAM9260 / AT91SAM9XE Board Type"
156 
157 config MACH_AT91SAM9260EK
158         bool "Atmel AT91SAM9260-EK / AT91SAM9XE Evaluation Kit"
159         select HAVE_AT91_DATAFLASH_CARD
160         help
161           Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit
162           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3933>
163 
164 config MACH_CAM60
165         bool "KwikByte KB9260 (CAM60) board"
166         help
167           Select this if you are using KwikByte's KB9260 (CAM60) board based on the Atmel AT91SAM9260.
168           <http://www.kwikbyte.com/KB9260.html>
169 
170 config MACH_SAM9_L9260
171         bool "Olimex SAM9-L9260 board"
172         select HAVE_AT91_DATAFLASH_CARD
173         help
174           Select this if you are using Olimex's SAM9-L9260 board based on the Atmel AT91SAM9260.
175           <http://www.olimex.com/dev/sam9-L9260.html>
176 
177 config MACH_AFEB9260
178         bool "Custom afeb9260 board v1"
179         help
180           Select this if you are using custom afeb9260 board based on
181           open hardware design. Select this for revision 1 of the board.
182           <svn://194.85.238.22/home/users/george/svn/arm9eb>
183           <http://groups.google.com/group/arm9fpga-evolution-board>
184 
185 config MACH_CPU9260
186         bool "Eukrea CPU9260 board"
187         help
188           Select this if you are using a Eukrea Electromatique's
189           CPU9260 Board <http://www.eukrea.com/>
190 
191 config MACH_FLEXIBITY
192         bool "Flexibity Connect board"
193         help
194           Select this if you are using Flexibity Connect board
195           <http://www.flexibity.com>
196 
197 comment "AT91SAM9G20 Board Type"
198 
199 config MACH_AT91SAM9G20EK
200         bool "Atmel AT91SAM9G20-EK Evaluation Kit"
201         select HAVE_AT91_DATAFLASH_CARD
202         help
203           Select this if you are using Atmel's AT91SAM9G20-EK Evaluation Kit
204           that embeds only one SD/MMC slot.
205 
206 config MACH_AT91SAM9G20EK_2MMC
207         depends on MACH_AT91SAM9G20EK
208         bool "Atmel AT91SAM9G20-EK Evaluation Kit with 2 SD/MMC Slots"
209         help
210           Select this if you are using an Atmel AT91SAM9G20-EK Evaluation Kit
211           with 2 SD/MMC Slots. This is the case for AT91SAM9G20-EK rev. C and
212           onwards.
213           <http://www.atmel.com/tools/SAM9G20-EK.aspx>
214 
215 config MACH_CPU9G20
216         bool "Eukrea CPU9G20 board"
217         help
218           Select this if you are using a Eukrea Electromatique's
219           CPU9G20 Board <http://www.eukrea.com/>
220 
221 config MACH_ACMENETUSFOXG20
222         bool "Acme Systems srl FOX Board G20"
223         help
224           Select this if you are using Acme Systems
225           FOX Board G20 <http://www.acmesystems.it>
226 
227 config MACH_PORTUXG20
228         bool "taskit PortuxG20"
229         help
230           Select this if you are using taskit's PortuxG20.
231           <http://www.taskit.de/en/>
232 
233 config MACH_STAMP9G20
234         bool "taskit Stamp9G20 CPU module"
235         help
236           Select this if you are using taskit's Stamp9G20 CPU module on its
237           evaluation board.
238           <http://www.taskit.de/en/>
239 
240 config MACH_PCONTROL_G20
241         bool "PControl G20 CPU module"
242         help
243           Select this if you are using taskit's Stamp9G20 CPU module on this
244           carrier board, being the decentralized unit of a building automation
245           system; featuring nvram, eth-switch, iso-rs485, display, io
246 
247 config MACH_GSIA18S
248         bool "GS_IA18_S board"
249         help
250           This enables support for the GS_IA18_S board
251           produced by GeoSIG Ltd company. This is an internet accelerograph.
252           <http://www.geosig.com>
253 
254 config MACH_SNAPPER_9260
255         bool "Bluewater Systems Snapper 9260/9G20 module"
256         help
257           Select this if you are using the Bluewater Systems Snapper 9260 or
258           Snapper 9G20 modules.
259           <http://www.bluewatersys.com/>
260 endif
261 
262 # ----------------------------------------------------------
263 
264 if ARCH_AT91SAM9261
265 
266 comment "AT91SAM9261 Board Type"
267 
268 config MACH_AT91SAM9261EK
269         bool "Atmel AT91SAM9261-EK Evaluation Kit"
270         select HAVE_AT91_DATAFLASH_CARD
271         help
272           Select this if you are using Atmel's AT91SAM9261-EK Evaluation Kit.
273           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=3820>
274 
275 comment "AT91SAM9G10 Board Type"
276 
277 config MACH_AT91SAM9G10EK
278         bool "Atmel AT91SAM9G10-EK Evaluation Kit"
279         select HAVE_AT91_DATAFLASH_CARD
280         help
281           Select this if you are using Atmel's AT91SAM9G10-EK Evaluation Kit.
282           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4588>
283 
284 endif
285 
286 # ----------------------------------------------------------
287 
288 if ARCH_AT91SAM9263
289 
290 comment "AT91SAM9263 Board Type"
291 
292 config MACH_AT91SAM9263EK
293         bool "Atmel AT91SAM9263-EK Evaluation Kit"
294         select HAVE_AT91_DATAFLASH_CARD
295         help
296           Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit.
297           <http://www.atmel.com/dyn/products/tools_card.asp?tool_id=4057>
298 
299 endif
300 
301 # ----------------------------------------------------------
302 
303 if ARCH_AT91SAM9RL
304 
305 comment "AT91SAM9RL Board Type"
306 
307 config MACH_AT91SAM9RLEK
308         bool "Atmel AT91SAM9RL-EK Evaluation Kit"
309         help
310           Select this if you are using Atmel's AT91SAM9RL-EK Evaluation Kit.
311 
312 endif
313 
314 # ----------------------------------------------------------
315 
316 if ARCH_AT91SAM9G45
317 
318 comment "AT91SAM9G45 Board Type"
319 
320 config MACH_AT91SAM9M10G45EK
321         bool "Atmel AT91SAM9M10G45-EK Evaluation Kits"
322         help
323           Select this if you are using Atmel's AT91SAM9M10G45-EK Evaluation Kit.
324           Those boards can be populated with any SoC of AT91SAM9G45 or AT91SAM9M10
325           families: AT91SAM9G45, AT91SAM9G46, AT91SAM9M10 and AT91SAM9M11.
326           <http://www.atmel.com/tools/SAM9M10-G45-EK.aspx>
327 
328 endif
329 
330 # ----------------------------------------------------------
331 
332 if ARCH_AT91X40
333 
334 comment "AT91X40 Board Type"
335 
336 config MACH_AT91EB01
337         bool "Atmel AT91EB01 Evaluation Kit"
338         help
339           Select this if you are using Atmel's AT91EB01 Evaluation Kit.
340           It is also a popular target for simulators such as GDB's
341           ARM simulator (commonly known as the ARMulator) and the
342           Skyeye simulator.
343 
344 endif
345 
346 # ----------------------------------------------------------
347 
348 comment "AT91 Board Options"
349 
350 config MTD_AT91_DATAFLASH_CARD
351         bool "Enable DataFlash Card support"
352         depends on HAVE_AT91_DATAFLASH_CARD
353         help
354           Enable support for the DataFlash card.
355 
356 endmenu

This page was automatically generated by LXR 0.3.1 (source).  •  Linux is a registered trademark of Linus Torvalds  •  Contact us